masque/examples/tutorial/devices.py

from typing import Tuple, Sequence, Dict

import numpy
from numpy import pi

from masque import layer_t, Pattern, SubPattern, Label
from masque.shapes import Polygon
from masque.builder import Device, Port, port_utils
from masque.file.gdsii import writefile

import pcgen
import basic_shapes
from basic_shapes import GDS_OPTS


LATTICE_CONSTANT = 512
RADIUS = LATTICE_CONSTANT / 2 * 0.75


def dev2pat(dev: Device) -> Pattern:
    """
    Bake port information into the device.
    This places a label at each port location on layer (3, 0) with text content
      'name:ptype angle_deg'
    """
    return port_utils.dev2pat(dev, layer=(3, 0))


def pat2dev(pat: Pattern) -> Device:
    """
    Scans the Pattern to determine port locations. Same format as `dev2pat`
    """
    return port_utils.pat2dev(pat, layers=[(3, 0)])


def perturbed_l3(
        lattice_constant: float,
        hole: Pattern,
        trench_dose: float = 1.0,
        trench_layer: layer_t = (1, 0),
        shifts_a: Sequence[float] = (0.15, 0, 0.075),
        shifts_r: Sequence[float] = (1.0, 1.0, 1.0),
        xy_size: Tuple[int, int] = (10, 10),
        perturbed_radius: float = 1.1,
        trench_width: float = 1200,
        ) -> Device:
    """
    Generate a `Device` representing a perturbed L3 cavity.

    Args:
        lattice_constant: Distance between nearest neighbor holes
        hole: `Pattern` object containing a single hole
        trench_dose: Dose for the trenches. Default 1.0. (Hole dose is 1.0.)
        trench_layer: Layer for the trenches, default `(1, 0)`.
        shifts_a: passed to `pcgen.l3_shift`; specifies lattice constant
            (1 - multiplicative factor) for shifting holes adjacent to
            the defect (same row). Default `(0.15, 0, 0.075)` for first,
            second, third holes.
        shifts_r: passed to `pcgen.l3_shift`; specifies radius for perturbing
            holes adjacent to the defect (same row). Default 1.0 for all holes.
            Provided sequence should have same length as `shifts_a`.
        xy_size: `(x, y)` number of mirror periods in each direction; total size is
                `2 * n + 1` holes in each direction. Default (10, 10).
        perturbed_radius: radius of holes perturbed to form an upwards-driected beam
                (multiplicative factor). Default 1.1.
        trench width: Width of the undercut trenches. Default 1200.

    Returns:
        `Device` object representing the L3 design.
    """
    # Get hole positions and radii
    xyr = pcgen.l3_shift_perturbed_defect(mirror_dims=xy_size,
                                          perturbed_radius=perturbed_radius,
                                          shifts_a=shifts_a,
                                          shifts_r=shifts_r)

    # Build L3 cavity, using references to the provided hole pattern
    pat = Pattern(f'L3p-a{lattice_constant:g}rp{perturbed_radius:g}')
    pat.subpatterns += [
        SubPattern(hole, scale=r,
                   offset=(lattice_constant * x,
                           lattice_constant * y))
        for x, y, r in xyr]

    # Add rectangular undercut aids
    min_xy, max_xy = pat.get_bounds_nonempty()
    trench_dx = max_xy[0] - min_xy[0]

    pat.shapes += [
        Polygon.rect(ymin=max_xy[1], xmin=min_xy[0], lx=trench_dx, ly=trench_width,
                     layer=trench_layer, dose=trench_dose),
        Polygon.rect(ymax=min_xy[1], xmin=min_xy[0], lx=trench_dx, ly=trench_width,
                     layer=trench_layer, dose=trench_dose),
        ]

    # Ports are at outer extents of the device (with y=0)
    extent = lattice_constant * xy_size[0]
    ports = {
        'input': Port((-extent, 0), rotation=0, ptype='pcwg'),
        'output': Port((extent, 0), rotation=pi, ptype='pcwg'),
        }

    return Device(pat, ports)


def waveguide(
        lattice_constant: float,
        hole: Pattern,
        length: int,
        mirror_periods: int,
        ) -> Device:
    """
    Generate a `Device` representing a photonic crystal line-defect waveguide.

    Args:
        lattice_constant: Distance between nearest neighbor holes
        hole: `Pattern` object containing a single hole
        length: Distance (number of mirror periods) between the input and output ports.
            Ports are placed at lattice sites.
        mirror_periods: Number of hole rows on each side of the line defect

    Returns:
        `Device` object representing the waveguide.
    """
    # Generate hole locations
    xy = pcgen.waveguide(length=length, num_mirror=mirror_periods)

    # Build the pattern
    pat = Pattern(f'_wg-a{lattice_constant:g}l{length}')
    pat.subpatterns += [SubPattern(hole, offset=(lattice_constant * x,
                                                 lattice_constant * y))
                        for x, y in xy]

    # Ports are at outer edges, with y=0
    extent = lattice_constant * length / 2
    ports = {
        'left': Port((-extent, 0), rotation=0, ptype='pcwg'),
        'right': Port((extent, 0), rotation=pi, ptype='pcwg'),
        }
    return Device(pat, ports)


def bend(
        lattice_constant: float,
        hole: Pattern,
        mirror_periods: int,
        ) -> Device:
    """
    Generate a `Device` representing a 60-degree counterclockwise bend in a photonic crystal
    line-defect waveguide.

    Args:
        lattice_constant: Distance between nearest neighbor holes
        hole: `Pattern` object containing a single hole
        mirror_periods: Minimum number of mirror periods on each side of the line defect.

    Returns:
        `Device` object representing the waveguide bend.
        Ports are named 'left' (input) and 'right' (output).
    """
    # Generate hole locations
    xy = pcgen.wgbend(num_mirror=mirror_periods)

    # Build the pattern
    pat= Pattern(f'_wgbend-a{lattice_constant:g}l{mirror_periods}')
    pat.subpatterns += [
        SubPattern(hole, offset=(lattice_constant * x,
                                 lattice_constant * y))
        for x, y in xy]

    # Figure out port locations.
    extent = lattice_constant * mirror_periods
    ports = {
        'left': Port((-extent, 0), rotation=0, ptype='pcwg'),
        'right': Port((extent / 2,
                       extent * numpy.sqrt(3) / 2),
                      rotation=pi * 4 / 3, ptype='pcwg'),
        }
    return Device(pat, ports)


def y_splitter(
        lattice_constant: float,
        hole: Pattern,
        mirror_periods: int,
        ) -> Device:
    """
    Generate a `Device` representing a photonic crystal line-defect waveguide y-splitter.

    Args:
        lattice_constant: Distance between nearest neighbor holes
        hole: `Pattern` object containing a single hole
        mirror_periods: Minimum number of mirror periods on each side of the line defect.

    Returns:
        `Device` object representing the y-splitter.
        Ports are named 'in', 'top', and 'bottom'.
    """
    # Generate hole locations
    xy = pcgen.y_splitter(num_mirror=mirror_periods)

    # Build pattern
    pat = Pattern(f'_wgsplit_half-a{lattice_constant:g}l{mirror_periods}')
    pat.subpatterns += [
        SubPattern(hole, offset=(lattice_constant * x,
                                 lattice_constant * y))
        for x, y in xy]

    # Determine port locations
    extent = lattice_constant * mirror_periods
    ports = {
        'in': Port((-extent, 0), rotation=0, ptype='pcwg'),
        'top': Port((extent / 2,  extent * numpy.sqrt(3) / 2), rotation=pi * 4 / 3, ptype='pcwg'),
        'bot': Port((extent / 2, -extent * numpy.sqrt(3) / 2), rotation=pi * 2 / 3, ptype='pcwg'),
        }
    return Device(pat, ports)



def main(interactive: bool = True):
    # Generate some basic hole patterns
    smile = basic_shapes.smile(RADIUS)
    hole = basic_shapes.hole(RADIUS)

    # Build some devices
    a = LATTICE_CONSTANT
    wg10 = waveguide(lattice_constant=a, hole=hole, length=10, mirror_periods=5).rename('wg10')
    wg05 = waveguide(lattice_constant=a, hole=hole, length=5, mirror_periods=5).rename('wg05')
    wg28 = waveguide(lattice_constant=a, hole=hole, length=28, mirror_periods=5).rename('wg28')
    bend0 = bend(lattice_constant=a, hole=hole, mirror_periods=5).rename('bend0')
    ysplit = y_splitter(lattice_constant=a, hole=hole, mirror_periods=5).rename('ysplit')
    l3cav = perturbed_l3(lattice_constant=a, hole=smile, xy_size=(4, 10)).rename('l3cav')   # uses smile :)

    # Autogenerate port labels so that GDS will also contain port data
    for device in [wg10, wg05, wg28, l3cav, ysplit, bend0]:
        dev2pat(device)

    #
    # Build a circuit
    #
    circ = Device(name='my_circuit', ports={})

    # Start by placing a waveguide. Call its ports "in" and "signal".
    circ.place(wg10, offset=(0, 0), port_map={'left': 'in', 'right': 'signal'})

    # Extend the signal path by attaching the "left" port of a waveguide.
    #   Since there is only one other port ("right") on the waveguide we
    # are attaching (wg10), it automatically inherits the name "signal".
    circ.plug(wg10, {'signal': 'left'})

    # Attach a y-splitter to the signal path.
    #   Since the y-splitter has 3 ports total, we can't auto-inherit the
    # port name, so we have to specify what we want to name the unattached
    # ports. We can call them "signal1" and "signal2".
    circ.plug(ysplit, {'signal': 'in'}, {'top': 'signal1', 'bot': 'signal2'})

    # Add a waveguide to both signal ports, inheriting their names.
    circ.plug(wg05, {'signal1': 'left'})
    circ.plug(wg05, {'signal2': 'left'})

    # Add a bend to both ports.
    #   Our bend's ports "left" and "right" refer to the original counterclockwise
    # orientation. We want the bends to turn in opposite directions, so we attach
    # the "right" port to "signal1" to bend clockwise, and the "left" port
    # to "signal2" to bend counterclockwise.
    #   We could also use `mirrored=(True, False)` to mirror one of the devices
    # and then use same device port on both paths.
    circ.plug(bend0, {'signal1': 'right'})
    circ.plug(bend0, {'signal2': 'left'})

    # We add some waveguides and a cavity to "signal1".
    circ.plug(wg10, {'signal1': 'left'})
    circ.plug(l3cav, {'signal1': 'input'})
    circ.plug(wg10, {'signal1': 'left'})

    # "signal2" just gets a single of equivalent length
    circ.plug(wg28, {'signal2': 'left'})

    # Now we bend both waveguides back towards each other
    circ.plug(bend0, {'signal1': 'right'})
    circ.plug(bend0, {'signal2': 'left'})
    circ.plug(wg05, {'signal1': 'left'})
    circ.plug(wg05, {'signal2': 'left'})

    # To join the waveguides, we attach a second y-junction.
    #   We plug "signal1" into the "bot" port, and "signal2" into the "top" port.
    # The remaining port gets named "signal_out".
    #   This operation would raise an exception if the ports did not line up
    # correctly (i.e. they required different rotations or translations of the
    # y-junction device).
    circ.plug(ysplit, {'signal1': 'bot', 'signal2': 'top'}, {'in': 'signal_out'})

    # Finally, add some more waveguide to "signal_out".
    circ.plug(wg10, {'signal_out': 'left'})

    # We can visualize the design. Usually it's easier to just view the GDS.
    if interactive:
        print('Visualizing... this step may be slow')
        circ.pattern.visualize()

    # We can also add text labels for our circuit's ports.
    #   They will appear at the uppermost hierarchy level, while the individual
    # device ports will appear further down, in their respective cells.
    dev2pat(circ)

    # Write out to GDS
    writefile(circ.pattern, 'circuit.gds', **GDS_OPTS)


if __name__ == '__main__':
    main()