[wip] introduce BuildLibrary and make overlay first-class

examples/tutorial/README.md

@@ -20,10 +20,10 @@ Contents
     * Use `Pather` to snap ports together into a circuit
     * Check for dangling references
 - [library](library.py)
-    * Continue from `devices.py` using a lazy library
+    * Continue from `devices.py` by declaring a mixed library with `BuildLibrary`
-    * Create a `LazyLibrary`, which loads / generates patterns only when they are first used
+    * Import source-backed GDS cells and register python-generated recipes together
+    * Call `build()` to produce a normal library for downstream `Pather` usage and writing
     * Explore alternate ways of specifying a pattern for `.plug()` and `.place()`
-    * Design a pattern which is meant to plug into an existing pattern (via `.interface()`)
 - [pather](pather.py)
     * Use `Pather` to route individual wires and wire bundles
     * Use `AutoTool` to generate paths

examples/tutorial/library.py

@@ -1,142 +1,114 @@
 """
-Tutorial: using `LazyLibrary` and `Pather.interface()`.
+Tutorial: authoring a mixed library with `BuildLibrary`.
 
 This example assumes you have already read `devices.py` and generated the
 `circuit.gds` file it writes. The goal here is not the photonic-crystal geometry
-itself, but rather how Masque lets you mix lazily loaded GDS content with
+itself, but rather how Masque lets you combine imported GDS cells with
-python-generated devices inside one library.
+python-generated recipes, then turn that declaration set into a normal library
+for downstream assembly and writing.
 """
 from typing import Any
 from pprint import pformat
 
 
-from masque import Pather, LazyLibrary
+from masque import BuildLibrary, Pather, Pattern, cell
-from masque.file.gdsii import writefile, load_libraryfile
+from masque.file.gdsii import writefile
+from masque.file.gdsii_lazy import readfile
 
 import basic_shapes
 import devices
-from devices import data_to_ports
 from basic_shapes import GDS_OPTS
 
 
+def make_mixed_waveguide(lib: BuildLibrary) -> Pattern:
+    """
+    Recipe which assembles imported and generated cells behind the builder API.
+    """
+    circ = Pather(library=lib, ports='tri_l3cav')
+
+    # First way to specify what we are plugging in: request an explicit abstract.
+    circ.plug(lib.abstract('wg10'), {'input': 'right'})
+
+    # Second way: use an AbstractView, which behaves like a mapping of names
+    # to abstracts.
+    abstracts = lib.abstract_view()
+    circ.plug(abstracts['wg10'], {'output': 'left'})
+
+    # Third way: let Pather resolve a pattern name through its own library.
+    circ.plug('tri_wg10', {'input': 'right'})
+    circ.plug('tri_wg10', {'output': 'left'})
+
+    return circ.pattern
+
+
 def main() -> None:
-    # A `LazyLibrary` delays work until a pattern is actually needed.
+    builder = BuildLibrary()
-    # That applies both to GDS cells we load from disk and to python callables
+    cells = builder.cells
-    # that generate patterns on demand.
-    lib = LazyLibrary()
 
     #
     # Load some devices from a GDS file
     #
 
-    # Scan circuit.gds and prepare to lazy-load its contents
+    # Scan circuit.gds and prepare to lazy-load its contents. Port labels are
-    gds_lib, _properties = load_libraryfile('circuit.gds', postprocess=data_to_ports)
+    # imported on first materialization, but the raw source remains untouched
+    # until we build the final library.
+    gds_lib, _properties = readfile('circuit.gds')
+    builder.add_source(gds_lib.with_ports_from_data(layers=[(3, 0)], max_depth=1))
 
-    # Add those cells into our lazy library.
+    print('Registered imported cells:\n' + pformat(list(gds_lib.keys())))
-    # Nothing is read yet; we are only registering how to fetch and postprocess
-    # each pattern when it is first requested.
-    lib.add(gds_lib)
-
-    print('Patterns loaded from GDS into library:\n' + pformat(list(lib.keys())))
 
     #
-    # Add some new devices to the library, this time from python code rather than GDS
+    # Register some new devices, this time from python code rather than GDS.
     #
 
-    lib['triangle'] = lambda: basic_shapes.triangle(devices.RADIUS)
+    cells.triangle = basic_shapes.triangle(devices.RADIUS)
     opts: dict[str, Any] = dict(
-        lattice_constant = devices.LATTICE_CONSTANT,
+        lattice_constant=devices.LATTICE_CONSTANT,
-        hole = 'triangle',
+        hole='triangle',
     )
 
-    # Triangle-based variants. These lambdas are only recipes for building the
+    cells.tri_wg10 = cell(devices.waveguide)(length=10, mirror_periods=5, **opts)
-    # patterns; they do not execute until someone asks for the cell.
+    cells.tri_wg05 = cell(devices.waveguide)(length=5, mirror_periods=5, **opts)
-    lib['tri_wg10'] = lambda: devices.waveguide(length=10, mirror_periods=5, **opts)
+    cells.tri_wg28 = cell(devices.waveguide)(length=28, mirror_periods=5, **opts)
-    lib['tri_wg05'] = lambda: devices.waveguide(length=5, mirror_periods=5, **opts)
+    cells.tri_bend0 = cell(devices.bend)(mirror_periods=5, **opts)
-    lib['tri_wg28'] = lambda: devices.waveguide(length=28, mirror_periods=5, **opts)
+    cells.tri_ysplit = cell(devices.y_splitter)(mirror_periods=5, **opts)
-    lib['tri_bend0'] = lambda: devices.bend(mirror_periods=5, **opts)
+    cells.tri_l3cav = cell(devices.perturbed_l3)(xy_size=(4, 10), **opts, hole_lib=builder)
-    lib['tri_ysplit'] = lambda: devices.y_splitter(mirror_periods=5, **opts)
+    cells.mixed_wg_cav = cell(make_mixed_waveguide)(builder)
-    lib['tri_l3cav'] = lambda: devices.perturbed_l3(xy_size=(4, 10), **opts, hole_lib=lib)
+
+    print('Declared cells waiting to be built:\n' + pformat(list(builder.keys())))
 
     #
-    # Build a mixed waveguide with an L3 cavity in the middle
+    # Build the declaration set into a normal library.
     #
 
-    # Start a new design by copying the ports from an existing library cell.
+    built = builder.build()
-    # This gives `circ2` the same external interface as `tri_l3cav`.
+    print('Built library contains:\n' + pformat(list(built.keys())))
-    circ2 = Pather(library=lib, ports='tri_l3cav')
-
-    # First way to specify what we are plugging in: request an explicit abstract.
-    # This works with `Pattern` methods directly as well as with `Pather`.
-    circ2.plug(lib.abstract('wg10'), {'input': 'right'})
-
-    # Second way: use an `AbstractView`, which behaves like a mapping of names
-    # to abstracts.
-    abstracts = lib.abstract_view()
-    circ2.plug(abstracts['wg10'], {'output': 'left'})
-
-    # Third way: let `Pather` resolve a pattern name through its own library.
-    # This shorthand is convenient, but it is specific to helpers that already
-    # carry a library reference.
-    circ2.plug('tri_wg10', {'input': 'right'})
-    circ2.plug('tri_wg10', {'output': 'left'})
-
-    # Add the circuit to the device library.
-    lib['mixed_wg_cav'] = circ2.pattern
-
 
     #
-    # Build a second device that is explicitly designed to mate with `circ2`.
+    # Continue designing against the built library.
     #
 
-    # `Pather.interface()` makes a new pattern whose ports mirror an existing
+    # The built result behaves like a normal mutable library, so downstream code
-    # design's external interface. That is useful when you want to design an
+    # can use Pather, abstract views, and writing without going back through the
-    # adapter, continuation, or mating structure.
+    # builder interface.
-    circ3 = Pather.interface(source=circ2)
+    circ = Pather.interface(source='mixed_wg_cav', library=built)
-
+    circ.plug('tri_bend0', {'input': 'right'})
-    # Continue routing outward from those inherited ports.
+    circ.plug('tri_bend0', {'input': 'left'}, mirrored=True)   # mirror since no tri y-symmetry
-    circ3.plug('tri_bend0', {'input': 'right'})
+    circ.plug('tri_bend0', {'input': 'right'})
-    circ3.plug('tri_bend0', {'input': 'left'}, mirrored=True) # mirror since no tri y-symmetry
+    circ.plug('bend0', {'output': 'left'})
-    circ3.plug('tri_bend0', {'input': 'right'})
+    circ.plug('bend0', {'output': 'left'})
-    circ3.plug('bend0', {'output': 'left'})
+    circ.plug('bend0', {'output': 'left'})
-    circ3.plug('bend0', {'output': 'left'})
+    circ.plug('tri_wg10', {'input': 'right'})
-    circ3.plug('bend0', {'output': 'left'})
+    circ.plug('tri_wg28', {'input': 'right'})
-    circ3.plug('tri_wg10', {'input': 'right'})
+    circ.plug('tri_wg10', {'input': 'right', 'output': 'left'})
-    circ3.plug('tri_wg28', {'input': 'right'})
+    built['loop_segment'] = circ.pattern
-    circ3.plug('tri_wg10', {'input': 'right', 'output': 'left'})
-
-    lib['loop_segment'] = circ3.pattern
 
     #
-    # Write all devices into a GDS file
+    # Write all devices into a GDS file.
     #
     print('Writing library to file...')
-    writefile(lib, 'library.gds', **GDS_OPTS)
+    writefile(built, 'library.gds', **GDS_OPTS)
 
 
 if __name__ == '__main__':
     main()
-
-
-#
-#class prout:
-#    def place(
-#            self,
-#            other: Pattern,
-#            label_layer: layer_t = 'WATLAYER',
-#            *,
-#            port_map: Dict[str, str | None] | None = None,
-#            **kwargs,
-#            ) -> 'prout':
-#
-#        Pattern.place(self, other, port_map=port_map, **kwargs)
-#        name: str | None
-#        for name in other.ports:
-#            if port_map:
-#                assert(name is not None)
-#                name = port_map.get(name, name)
-#            if name is None:
-#                continue
-#            self.pattern.label(string=name, offset=self.ports[name].offset, layer=label_layer)
-#        return self
-#

masque/__init__.py

@@ -63,10 +63,15 @@ from .library import (
     ILibrary as ILibrary,
     LibraryView as LibraryView,
     Library as Library,
+    BuiltLibrary as BuiltLibrary,
+    BuildLibrary as BuildLibrary,
+    BuildReport as BuildReport,
+    CellProvenance as CellProvenance,
     LazyLibrary as LazyLibrary,
     AbstractView as AbstractView,
     TreeView as TreeView,
     Tree as Tree,
+    cell as cell,
     )
 from .ports import (
     Port as Port,

masque/builder/tools.py

@@ -1,9 +1,19 @@
 """
 Tools are objects which dynamically generate simple single-use devices (e.g. wires or waveguides)
 
-Concrete tools may implement native planning/rendering for `L`, `S`, or `U` routes.
+The `Tool` interface has two layers:
-Any unimplemented planning method falls back to the corresponding `trace*()` method,
+
-and `Pather` may further synthesize some routes from simpler primitives when needed.
+* `traceL`/`traceS`/`traceU` create concrete single-use geometry immediately.
+* `planL`/`planS`/`planU` return an output `Port` plus tool-specific render
+  data, allowing `Pather(auto_render=False)` to defer geometry creation until
+  `Tool.render()` is called with a batch of `RenderStep`s.
+
+Plans are expressed in local tool coordinates: the input port is at `(0, 0)`
+with rotation `0`, `length` is measured along the input axis, and positive
+`jog` is left of the direction of travel. Concrete tools may implement native
+planning/rendering for L, S, and U routes; otherwise the base planning methods
+fall back to the corresponding `trace*()` methods. `Pather` may also synthesize
+some routes from simpler primitives when a tool does not provide a native route.
 """
 from typing import Literal, Any, Self, cast
 from collections.abc import Sequence, Callable, Iterator
@@ -25,8 +35,11 @@ from ..error import BuildError
 @dataclass(frozen=True, slots=True)
 class RenderStep:
     """
-    Representation of a single saved operation, used by deferred `Pather`
+    A single deferred routing operation.
-    instances and passed to `Tool.render()` when `Pather.render()` is called.
+
+    `Pather(auto_render=False)` stores these records while routing and later
+    passes batches of compatible steps to `Tool.render()` when `Pather.render()`
+    is called.
     """
     opcode: Literal['L', 'S', 'U', 'P']
     """ What operation is being performed.
@@ -37,10 +50,13 @@ class RenderStep:
     """
 
     tool: 'Tool | None'
-    """ The current tool. May be `None` if `opcode='P'` """
+    """ Tool that produced this step, or `None` for `opcode='P'`. """
 
     start_port: Port
+    """ Input-side port before this step is rendered. """
+
     end_port: Port
+    """ Output-side port after this step is rendered. """
 
     data: Any
     """ Arbitrary tool-specific data"""
@@ -101,7 +117,9 @@ class RenderStep:
 
 def measure_tool_plan(tree: ILibrary, port_names: tuple[str, str]) -> tuple[Port, Any]:
     """
-    Extracts a Port and returns the tree (as data) for tool planning fallbacks.
+    Measure generated geometry for the base `Tool.plan*()` fallbacks.
+
+    Returns the calculated output port and the original tree as render data.
     """
     pat = tree.top_pattern()
     in_p = pat[port_names[0]]
@@ -113,6 +131,13 @@ def measure_tool_plan(tree: ILibrary, port_names: tuple[str, str]) -> tuple[Port
 class Tool:
     """
     Interface for path (e.g. wire or waveguide) generation.
+
+    Subclasses may implement immediate `trace*()` methods, deferred
+    `plan*()`/`render()` methods, or both. The base `plan*()` implementations
+    call the matching `trace*()` method and measure the resulting ports, so a
+    simple immediate-rendering tool can implement only `traceL`, `traceS`, or
+    `traceU` as needed. Tools that support deferred rendering should return
+    compact, tool-specific data from `plan*()` and consume it in `render()`.
     """
     def traceL(
             self,
@@ -172,7 +197,7 @@ class Tool:
         """
         Create a wire or waveguide that travels exactly `length` distance along the axis
         of its input port, and `jog` distance on the perpendicular axis.
-        `jog` is positive when moving left of the direction of travel (from input to ouput port).
+        `jog` is positive when moving left of the direction of travel (from input to output port).
 
         Used by `Pather`.
 
@@ -236,7 +261,7 @@ class Tool:
 
         Returns:
             The calculated output `Port` for the wire, assuming an input port at (0, 0) with rotation 0.
-            Any tool-specifc data, to be stored in `RenderStep.data`, for use during rendering.
+            Any tool-specific data, to be stored in `RenderStep.data`, for use during rendering.
 
         Raises:
             BuildError if an impossible or unsupported geometry is requested.
@@ -284,7 +309,7 @@ class Tool:
 
         Returns:
             The calculated output `Port` for the wire, assuming an input port at (0, 0) with rotation 0.
-            Any tool-specifc data, to be stored in `RenderStep.data`, for use during rendering.
+            Any tool-specific data, to be stored in `RenderStep.data`, for use during rendering.
 
         Raises:
             BuildError if an impossible or unsupported geometry is requested.
@@ -312,8 +337,9 @@ class Tool:
             **kwargs,
             ) -> Library:
         """
-        Create a wire or waveguide that travels exactly `jog` distance along the axis
+        Create a wire or waveguide whose output is displaced by `length` along
-        perpendicular to its input port (i.e. a U-bend).
+        the input axis and `jog` along the perpendicular axis, while preserving
+        the input orientation (i.e. a U-bend or jogged U-turn).
 
         Used by `Pather`. Tools may leave this unimplemented if they
         do not support a native U-bend primitive.
@@ -328,6 +354,7 @@ class Tool:
             jog: The total offset from the input to output, along the perpendicular axis.
                 A positive number implies a leftwards shift (i.e. counterclockwise bend
                 followed by a clockwise bend)
+            length: The total offset from the input to output, along the input axis.
             in_ptype: The `ptype` of the port into which this wire's input will be `plug`ged.
             out_ptype: The `ptype` of the port into which this wire's output will be `plug`ged.
             port_names: The output pattern will have its input port named `port_names[0]` and
@@ -351,8 +378,9 @@ class Tool:
             **kwargs,
             ) -> tuple[Port, Any]:
         """
-        Plan a wire or waveguide that travels exactly `jog` distance along the axis
+        Plan a wire or waveguide whose output is displaced by optional `length`
-        perpendicular to its input port (i.e. a U-bend).
+        along the input axis and `jog` along the perpendicular axis, while
+        preserving the input orientation (i.e. a U-bend or jogged U-turn).
 
         Used by `Pather` when `auto_render=False`. This is an optional native-planning hook: tools may
         implement it when they can represent a U-turn directly, otherwise they may rely
@@ -374,7 +402,7 @@ class Tool:
 
         Returns:
             The calculated output `Port` for the wire, assuming an input port at (0, 0) with rotation 0.
-            Any tool-specifc data, to be stored in `RenderStep.data`, for use during rendering.
+            Any tool-specific data, to be stored in `RenderStep.data`, for use during rendering.
 
         Raises:
             BuildError if an impossible or unsupported geometry is requested.
@@ -404,6 +432,11 @@ class Tool:
         Render the provided `batch` of `RenderStep`s into geometry, returning a tree
         (a Library with a single topcell).
 
+        The base implementation is intended for steps whose plan data came from
+        the base fallback planners, where `RenderStep.data` is already an
+        `ILibrary`. Subclasses with native `plan*()` data should generally
+        override this method.
+
         Args:
             batch: A sequence of `RenderStep` objects containing the ports and data
                 provided by this tool's `planL`/`planS`/`planU` functions.
@@ -464,15 +497,18 @@ abstract_tuple_t = tuple[Abstract, str, str]
 @dataclass
 class SimpleTool(Tool, metaclass=ABCMeta):
     """
-      A simple tool which relies on a single pre-rendered `bend` pattern, a function
+    Minimal L-route tool built from one straight generator and one bend.
-    for generating straight paths, and a table of pre-rendered `transitions` for converting
+
-    from non-native ptypes.
+    `SimpleTool` supports straight segments and single-bend L routes through
+    `planL`/`traceL`/`render`. It does not perform automatic port-type
+    transitions and does not provide native S or U routes. Use `AutoTool` when
+    routes need multiple candidate primitives, transitions, S-bends, or U-turns.
     """
     straight: tuple[Callable[[float], Pattern] | Callable[[float], Library], str, str]
-    """ `create_straight(length: float), in_port_name, out_port_name` """
+    """ `(create_straight, in_port_name, out_port_name)` for straight segments. """
 
     bend: abstract_tuple_t             # Assumed to be clockwise
-    """ `clockwise_bend_abstract, in_port_name, out_port_name` """
+    """ `(clockwise_bend_abstract, in_port_name, out_port_name)` for L turns. """
 
     default_out_ptype: str
     """ Default value for out_ptype """
@@ -482,7 +518,7 @@ class SimpleTool(Tool, metaclass=ABCMeta):
 
     @dataclass(frozen=True, slots=True)
     class LData:
-        """ Data for planL """
+        """ Deferred render data returned by `planL()`. """
         straight_length: float
         straight_kwargs: dict[str, Any]
         ccw: SupportsBool | None
@@ -608,43 +644,114 @@ class SimpleTool(Tool, metaclass=ABCMeta):
 @dataclass
 class AutoTool(Tool, metaclass=ABCMeta):
     """
-      A simple tool which relies on a single pre-rendered `bend` pattern, a function
+    A routing tool assembled from reusable path primitives.
-    for generating straight paths, and a table of pre-rendered `transitions` for converting
+
-    from non-native ptypes.
+    `AutoTool` chooses among prioritized straight generators, pre-rendered bends,
+    optional native S-bend generators, and pre-rendered transitions to satisfy the
+    `Tool` planning/rendering interface used by `Pather`.
+
+    Route selection is greedy in the order supplied by `straights`, `bends`, and
+    `sbends`. For each route, the planner subtracts any transition and bend
+    overhead from the requested distance, then uses the first candidate whose
+    remaining straight or jog length falls within that candidate's range.
+
+    `planL` uses one straight and, if `ccw` is not `None`, one bend. `planS`
+    first tries a straight plus a native S-bend, then a pure native S-bend, and
+    falls back to a two-L route when no native S-bend candidate fits. `planU`
+    is implemented as a two-L route.
+
+    Transition keys are `(external_ptype, internal_ptype)`. For example, a
+    transition keyed by `('m2wire', 'm1wire')` is used when the route is being
+    attached to an external `m2wire` port but the selected primitive is `m1wire`.
+    Call `add_complementary_transitions()` to automatically add reversed entries
+    for any missing opposite directions.
+
+    Straight and S-bend generator functions may return either a `Pattern` or a
+    single-top `Library`. Extra keyword arguments passed to `trace*()` or
+    `render()` are forwarded to those generators, along with any keyword
+    arguments captured during `plan*()`.
     """
 
     @dataclass(frozen=True, slots=True)
     class Straight:
-        """ Description of a straight-path generator """
+        """
+        Description of a straight-path generator.
+
+        `fn(length, **kwargs)` must return a path whose `in_port_name` and
+        `out_port_name` ports are separated by `length` along the input axis.
+        The planner considers this generator only when the required length is in
+        `length_range`, with an inclusive lower bound and exclusive upper bound.
+        """
         ptype: str
+        """ Port type produced by this straight segment. """
+
         fn: Callable[[float], Pattern] | Callable[[float], Library]
+        """ Generator function called as `fn(length, **kwargs)`. """
+
         in_port_name: str
+        """ Name of the input port on the generated pattern. """
+
         out_port_name: str
+        """ Name of the output port on the generated pattern. """
+
         length_range: tuple[float, float] = (0, numpy.inf)
+        """ Valid generated lengths, as `(inclusive_min, exclusive_max)`. """
 
     @dataclass(frozen=True, slots=True)
     class SBend:
-        """ Description of an s-bend generator """
+        """
+        Description of a native S-bend generator.
+
+        `fn(jog, **kwargs)` is called with a non-negative jog magnitude and must
+        return a path whose output port faces back toward the input port. For a
+        negative requested jog, `AutoTool` mirrors the generated S-bend during
+        rendering.
+        """
         ptype: str
+        """ Port type produced by this S-bend. """
 
         fn: Callable[[float], Pattern] | Callable[[float], Library]
         """
-        Generator function. `jog` (only argument) is assumed to be left (ccw) relative to travel
+        Generator function called as `fn(abs(jog), **kwargs)`. The generated
-        and may be negative for a jog in the opposite direction. Won't be called if jog=0.
+        geometry is assumed to jog left, i.e. counterclockwise relative to the
+        direction of travel. This function is not called when the residual jog is
+        zero.
         """
 
         in_port_name: str
+        """ Name of the input port on the generated pattern. """
+
         out_port_name: str
+        """ Name of the output port on the generated pattern. """
+
         jog_range: tuple[float, float] = (0, numpy.inf)
+        """ Valid residual jog magnitudes, as `(inclusive_min, exclusive_max)`. """
 
     @dataclass(frozen=True, slots=True)
     class Bend:
-        """ Description of a pre-rendered bend """
+        """
+        Description of a pre-rendered L-bend.
+
+        `abstract` must contain `in_port_name` and `out_port_name`. The
+        `clockwise` flag describes the in-to-out turn direction of that stored
+        bend. If `mirror` is true, `AutoTool` mirrors the stored bend to realize
+        the opposite turn direction; otherwise it plugs the bend from the
+        opposite port where possible.
+        """
         abstract: Abstract
+        """ Abstract for the reusable bend pattern. """
+
         in_port_name: str
+        """ Name of the bend input port. """
+
         out_port_name: str
+        """ Name of the bend output port. """
+
         clockwise: bool = True      # Is in-to-out clockwise?
+        """ Whether the stored bend turns clockwise from input to output. """
+
         mirror: bool = True         # Should we mirror to get the other rotation?
+        """ Whether to mirror the stored bend to produce the opposite turn. """
 
         @property
         def in_port(self) -> Port:
@@ -656,10 +763,22 @@ class AutoTool(Tool, metaclass=ABCMeta):
 
     @dataclass(frozen=True, slots=True)
     class Transition:
-        """ Description of a pre-rendered transition """
+        """
+        Description of a pre-rendered port-type transition.
+
+        `their_port_name` is the external side of the transition and
+        `our_port_name` is the side compatible with the selected internal
+        primitive. The transition table key should match that direction:
+        `(their_ptype, our_ptype)`.
+        """
         abstract: Abstract
+        """ Abstract for the reusable transition pattern. """
+
         their_port_name: str
+        """ Name of the external-side port. """
+
         our_port_name: str
+        """ Name of the internal primitive-side port. """
 
         @property
         def our_port(self) -> Port:
@@ -674,7 +793,7 @@ class AutoTool(Tool, metaclass=ABCMeta):
 
     @dataclass(frozen=True, slots=True)
     class LPlan:
-        """ Template for an L-path configuration """
+        """ Candidate L-route configuration before final straight length is known. """
         straight: 'AutoTool.Straight'
         bend: 'AutoTool.Bend | None'
         in_trans: 'AutoTool.Transition | None'
@@ -687,7 +806,7 @@ class AutoTool(Tool, metaclass=ABCMeta):
 
     @dataclass(frozen=True, slots=True)
     class LData:
-        """ Data for planL """
+        """ Deferred render data returned by `planL()`. """
         straight_length: float
         straight: 'AutoTool.Straight'
         straight_kwargs: dict[str, Any]
@@ -758,7 +877,7 @@ class AutoTool(Tool, metaclass=ABCMeta):
 
     @dataclass(frozen=True, slots=True)
     class SData:
-        """ Data for planS """
+        """ Deferred render data for native-S routes returned by `planS()`. """
         straight_length: float
         straight: 'AutoTool.Straight'
         gen_kwargs: dict[str, Any]
@@ -770,7 +889,7 @@ class AutoTool(Tool, metaclass=ABCMeta):
 
     @dataclass(frozen=True, slots=True)
     class UData:
-        """ Data for planU or planS (double-L) """
+        """ Deferred render data for `planU()` or double-L `planS()` routes. """
         ldata0: 'AutoTool.LData'
         ldata1: 'AutoTool.LData'
         straight2: 'AutoTool.Straight'
@@ -834,21 +953,27 @@ class AutoTool(Tool, metaclass=ABCMeta):
         raise BuildError(f"Failed to find a valid double-L configuration for {length=}, {jog=}")
 
     straights: list[Straight]
-    """ List of straight-generators to choose from, in order of priority """
+    """ Straight generators to choose from, in priority order. """
 
     bends: list[Bend]
-    """ List of bends to choose from, in order of priority """
+    """ L-bend primitives to choose from, in priority order. """
 
     sbends: list[SBend]
-    """ List of S-bend generators to choose from, in order of priority """
+    """ Native S-bend generators to choose from, in priority order. """
 
     transitions: dict[tuple[str, str], Transition]
-    """ `{(external_ptype, internal_ptype): Transition, ...}` """
+    """ Mapping from `(external_ptype, internal_ptype)` to transition primitive. """
 
     default_out_ptype: str
-    """ Default value for out_ptype """
+    """ Output port type used when a zero-length route provides no primitive ptype. """
 
     def add_complementary_transitions(self) -> Self:
+        """
+        Add reversed transition entries for any missing opposite directions.
+
+        Existing explicit entries are preserved. The method mutates
+        `self.transitions` and returns `self` for fluent construction.
+        """
         for iioo in list(self.transitions.keys()):
             ooii = (iioo[1], iioo[0])
             self.transitions.setdefault(ooii, self.transitions[iioo].reversed())
@@ -889,7 +1014,7 @@ class AutoTool(Tool, metaclass=ABCMeta):
             return numpy.zeros(2)
         orot = out_transition.our_port.rotation
         assert orot is not None
-        otrans_dxy = rotation_matrix_2d(pi - orot - bend_angle) @ (out_transition.their_port.offset - out_transition.our_port.offset)
+        otrans_dxy = rotation_matrix_2d(bend_angle - orot - pi) @ (out_transition.their_port.offset - out_transition.our_port.offset)
         return otrans_dxy
 
     def planL(
@@ -928,7 +1053,7 @@ class AutoTool(Tool, metaclass=ABCMeta):
             straight_kwargs: dict[str, Any],
             ) -> ILibrary:
         """
-        Render an L step into a preexisting tree
+        Render an L step into an existing tree.
         """
         pat = tree.top_pattern()
         if data.in_transition:
@@ -1061,7 +1186,7 @@ class AutoTool(Tool, metaclass=ABCMeta):
             gen_kwargs: dict[str, Any],
             ) -> ILibrary:
         """
-        Render an L step into a preexisting tree
+        Render a native-S step into an existing tree.
         """
         pat = tree.top_pattern()
         if data.in_transition:
@@ -1207,19 +1332,21 @@ class AutoTool(Tool, metaclass=ABCMeta):
 @dataclass
 class PathTool(Tool, metaclass=ABCMeta):
     """
-    A tool which draws `Path` geometry elements.
+    Tool that renders routes directly as `Pattern.path()` geometry.
 
-    If `planL` / `render` are used, the `Path` elements can cover >2 vertices;
+    `PathTool` supports L and S routes. Immediate `traceL()` and `traceS()`
-    with `path` only individual rectangles will be drawn.
+    create one path element per route, while deferred `render()` combines a
+    compatible batch of L/S `RenderStep`s into one multi-vertex path. U routes
+    are left to `Pather` synthesis or to a different tool.
     """
     layer: layer_t
-    """ Layer to draw on """
+    """ Layer to draw generated path geometry on. """
 
     width: float
-    """ `Path` width """
+    """ Width of generated path geometry. """
 
     ptype: str = 'unk'
-    """ ptype for any ports in patterns generated by this tool """
+    """ Port type for generated input and output ports. """
 
     #@dataclass(frozen=True, slots=True)
     #class LData:

masque/file/gdsii.py

@@ -22,8 +22,6 @@ Notes:
 from typing import IO, cast, Any
 from collections.abc import Iterable, Mapping, Callable
 from types import MappingProxyType
-import io
-import mmap
 import logging
 import pathlib
 import gzip
@@ -40,7 +38,7 @@ from .. import Pattern, Ref, PatternError, LibraryError, Label, Shape
 from ..shapes import Polygon, Path, RectCollection
 from ..repetition import Grid
 from ..utils import layer_t, annotations_t
-from ..library import LazyLibrary, Library, ILibrary, ILibraryView
+from ..library import Library, ILibrary
 
 
 logger = logging.getLogger(__name__)
@@ -542,117 +540,6 @@ def _labels_to_texts(labels: dict[layer_t, list[Label]]) -> list[klamath.element
     return texts
 
 
-def load_library(
-        stream: IO[bytes],
-        *,
-        full_load: bool = False,
-        postprocess: Callable[[ILibraryView, str, Pattern], Pattern] | None = None
-        ) -> tuple[LazyLibrary, dict[str, Any]]:
-    """
-    Scan a GDSII stream to determine what structures are present, and create
-        a library from them. This enables deferred reading of structures
-        on an as-needed basis.
-    All structures are loaded as secondary
-
-    Args:
-        stream: Seekable stream. Position 0 should be the start of the file.
-            The caller should leave the stream open while the library
-            is still in use, since the library will need to access it
-            in order to read the structure contents.
-        full_load: If True, force all structures to be read immediately rather
-            than as-needed. Since data is read sequentially from the file, this
-            will be faster than using the resulting library's `precache` method.
-        postprocess: If given, this function is used to post-process each
-            pattern *upon first load only*.
-
-    Returns:
-        LazyLibrary object, allowing for deferred load of structures.
-        Additional library info (dict, same format as from `read`).
-    """
-    stream.seek(0)
-    lib = LazyLibrary()
-
-    if full_load:
-        # Full load approach (immediately load everything)
-        patterns, library_info = read(stream)
-        for name, pattern in patterns.items():
-            if postprocess is not None:
-                lib[name] = postprocess(lib, name, pattern)
-            else:
-                lib[name] = pattern
-        return lib, library_info
-
-    # Normal approach (scan and defer load)
-    library_info = _read_header(stream)
-    structs = klamath.library.scan_structs(stream)
-
-    for name_bytes, pos in structs.items():
-        name = name_bytes.decode('ASCII')
-
-        def mkstruct(pos: int = pos, name: str = name) -> Pattern:
-            stream.seek(pos)
-            pat = read_elements(stream, raw_mode=True)
-            if postprocess is not None:
-                pat = postprocess(lib, name, pat)
-            return pat
-
-        lib[name] = mkstruct
-
-    return lib, library_info
-
-
-def load_libraryfile(
-        filename: str | pathlib.Path,
-        *,
-        use_mmap: bool = True,
-        full_load: bool = False,
-        postprocess: Callable[[ILibraryView, str, Pattern], Pattern] | None = None
-        ) -> tuple[LazyLibrary, dict[str, Any]]:
-    """
-    Wrapper for `load_library()` that takes a filename or path instead of a stream.
-
-    Will automatically decompress the file if it is gzipped.
-
-    NOTE that any streams/mmaps opened will remain open until ALL of the
-     `PatternGenerator` objects in the library are garbage collected.
-
-    Args:
-        path: filename or path to read from
-        use_mmap: If `True`, will attempt to memory-map the file instead
-                  of buffering. In the case of gzipped files, the file
-                  is decompressed into a python `bytes` object in memory
-                  and reopened as an `io.BytesIO` stream.
-        full_load: If `True`, immediately loads all data. See `load_library`.
-        postprocess: Passed to `load_library`
-
-    Returns:
-        LazyLibrary object, allowing for deferred load of structures.
-        Additional library info (dict, same format as from `read`).
-    """
-    path = pathlib.Path(filename)
-    stream: IO[bytes]
-    if is_gzipped(path):
-        if use_mmap:
-            logger.info('Asked to mmap a gzipped file, reading into memory instead...')
-            gz_stream = gzip.open(path, mode='rb')      # noqa: SIM115
-            stream = io.BytesIO(gz_stream.read())       # type: ignore
-        else:
-            gz_stream = gzip.open(path, mode='rb')      # noqa: SIM115
-            stream = io.BufferedReader(gz_stream)       # type: ignore
-    else:       # noqa: PLR5501
-        if use_mmap:
-            base_stream = path.open(mode='rb', buffering=0)                         # noqa: SIM115
-            stream = mmap.mmap(base_stream.fileno(), 0, access=mmap.ACCESS_READ)    # type: ignore
-        else:
-            stream = path.open(mode='rb')          # noqa: SIM115
-
-    try:
-        return load_library(stream, full_load=full_load, postprocess=postprocess)
-    finally:
-        if full_load:
-            stream.close()
-
-
 def check_valid_names(
         names: Iterable[str],
         max_length: int = 32,

masque/file/gdsii_lazy.py

@@ -0,0 +1,388 @@
+"""
+Classic source-backed lazy GDSII reader built on the pure-python klamath path.
+
+This module provides the non-Arrow half of Masque's lazy GDS architecture:
+
+- `GdsLibrarySource` scans a GDS stream once to discover library metadata,
+  struct order, and child edges without materializing every cell.
+- cells are materialized on demand through the classic `gdsii` decoder
+  whenever a caller indexes the lazy view
+- the source can be wrapped in `PortsLibraryView` or merged through
+  `OverlayLibrary`, both of which live in `gdsii_lazy_core`
+
+The public surface intentionally parallels `gdsii_lazy_arrow` closely so that
+callers can swap between the classic and Arrow-backed implementations with
+minimal changes.
+"""
+from __future__ import annotations
+
+from dataclasses import dataclass
+from typing import IO, Any, cast
+from collections import defaultdict
+from collections.abc import Iterator, Sequence
+import gzip
+import io
+import logging
+import mmap
+import pathlib
+
+import klamath
+import numpy
+from numpy.typing import NDArray
+from klamath import records
+
+from . import gdsii
+from .utils import is_gzipped
+from .gdsii_lazy_core import OverlayLibrary, PortsLibraryView, _pattern_children, write, writefile
+from ..error import LibraryError
+from ..library import ILibraryView, LibraryView, dangling_mode_t
+from ..pattern import Pattern
+from ..utils import apply_transforms
+
+
+logger = logging.getLogger(__name__)
+
+
+@dataclass
+class _SourceHandle:
+    """ Owns the underlying stream and any companion file handle for a source. """
+    path: pathlib.Path | None
+    stream: IO[bytes]
+    handle: IO[bytes] | None = None
+
+    def close(self) -> None:
+        self.stream.close()
+        if self.handle is not None and self.handle is not self.stream:
+            self.handle.close()
+            self.handle = None
+
+
+@dataclass(frozen=True)
+class _CellScan:
+    """ Scan-time metadata for one cell in the source stream. """
+    offset: int
+    children: set[str]
+
+
+def _open_source_stream(
+        filename: str | pathlib.Path,
+        *,
+        use_mmap: bool,
+        ) -> _SourceHandle:
+    path = pathlib.Path(filename).expanduser().resolve()
+    if is_gzipped(path):
+        if use_mmap:
+            logger.info('Asked to mmap a gzipped file, reading into memory instead...')
+            with gzip.open(path, mode='rb') as stream:
+                data = stream.read()
+            return _SourceHandle(path=path, stream=io.BytesIO(data))
+        stream = cast('IO[bytes]', gzip.open(path, mode='rb'))
+        return _SourceHandle(path=path, stream=stream)
+
+    if use_mmap:
+        handle = path.open(mode='rb', buffering=0)
+        mapped = cast('IO[bytes]', mmap.mmap(handle.fileno(), 0, access=mmap.ACCESS_READ))
+        return _SourceHandle(path=path, stream=mapped, handle=handle)
+
+    stream = path.open(mode='rb')
+    return _SourceHandle(path=path, stream=stream)
+
+
+def _scan_library(
+        stream: IO[bytes],
+        ) -> tuple[dict[str, Any], list[str], dict[str, _CellScan]]:
+    library_info = gdsii._read_header(stream)
+    order: list[str] = []
+    cells: dict[str, _CellScan] = {}
+
+    found_struct = records.BGNSTR.skip_past(stream)
+    while found_struct:
+        name = records.STRNAME.skip_and_read(stream).decode('ASCII')
+        offset = stream.tell()
+        elements = klamath.library.read_elements(stream)
+        children = {
+            element.struct_name.decode('ASCII')
+            for element in elements
+            if isinstance(element, klamath.elements.Reference)
+        }
+        order.append(name)
+        cells[name] = _CellScan(offset=offset, children=children)
+        found_struct = records.BGNSTR.skip_past(stream)
+
+    return library_info, order, cells
+
+
+class GdsLibrarySource(ILibraryView):
+    """
+    Read-only library backed by a seekable GDS stream.
+
+    Cells are scanned once up front to discover order and child edges, then
+    materialized one at a time through the classic `gdsii.read_elements` path.
+
+    The source owns the stream lifetime, preserves on-disk ordering through
+    `source_order()`, and answers graph queries from scan metadata whenever
+    possible so callers can inspect hierarchy without forcing a full load.
+    """
+
+    def __init__(
+            self,
+            *,
+            source: _SourceHandle,
+            library_info: dict[str, Any],
+            cell_order: Sequence[str],
+            cells: dict[str, _CellScan],
+            ) -> None:
+        self.path = source.path
+        self.library_info = library_info
+        self._source = source
+        self._cell_order = tuple(cell_order)
+        self._cells = cells
+        self._cache: dict[str, Pattern] = {}
+        self._lookups_in_progress: list[str] = []
+
+    @classmethod
+    def from_file(
+            cls,
+            filename: str | pathlib.Path,
+            *,
+            use_mmap: bool = True,
+            ) -> GdsLibrarySource:
+        source = _open_source_stream(filename, use_mmap=use_mmap)
+        source.stream.seek(0)
+        library_info, cell_order, cells = _scan_library(source.stream)
+        return cls(source=source, library_info=library_info, cell_order=cell_order, cells=cells)
+
+    def __getitem__(self, key: str) -> Pattern:
+        return self._materialize_pattern(key, persist=True)
+
+    def __iter__(self) -> Iterator[str]:
+        return iter(self._cell_order)
+
+    def __len__(self) -> int:
+        return len(self._cell_order)
+
+    def __contains__(self, key: object) -> bool:
+        return key in self._cells
+
+    def source_order(self) -> tuple[str, ...]:
+        return self._cell_order
+
+    def materialize_many(
+            self,
+            names: Sequence[str],
+            *,
+            persist: bool = True,
+            ) -> LibraryView:
+        mats = {
+            name: self._materialize_pattern(name, persist=persist)
+            for name in dict.fromkeys(names)
+        }
+        return LibraryView(mats)
+
+    def _materialize_pattern(self, name: str, *, persist: bool) -> Pattern:
+        if name in self._cache:
+            return self._cache[name]
+
+        if name not in self._cells:
+            raise KeyError(name)
+
+        if name in self._lookups_in_progress:
+            chain = ' -> '.join(self._lookups_in_progress + [name])
+            raise LibraryError(
+                f'Detected circular reference or recursive lookup of "{name}".\n'
+                f'Lookup chain: {chain}\n'
+                'This may be caused by an invalid (cyclical) reference, or buggy code.\n'
+                'If you are lazy-loading a file, try a non-lazy load and check for reference cycles.'
+                )
+
+        self._lookups_in_progress.append(name)
+        try:
+            self._source.stream.seek(self._cells[name].offset)
+            pat = gdsii.read_elements(self._source.stream, raw_mode=True)
+        finally:
+            self._lookups_in_progress.pop()
+
+        if persist:
+            self._cache[name] = pat
+        return pat
+
+    def _raw_children(self, name: str) -> set[str]:
+        return set(self._cells[name].children)
+
+    def child_graph(
+            self,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[str, set[str]]:
+        graph: dict[str, set[str]] = {}
+        for name in self._cell_order:
+            if name in self._cache:
+                graph[name] = _pattern_children(self._cache[name])
+            else:
+                graph[name] = self._raw_children(name)
+
+        existing = set(graph)
+        dangling_refs = set().union(*(children - existing for children in graph.values()))
+        if dangling == 'error':
+            if dangling_refs:
+                raise self._dangling_refs_error(cast('set[str]', dangling_refs), 'building child graph')
+            return graph
+        if dangling == 'ignore':
+            return {name: {child for child in children if child in existing} for name, children in graph.items()}
+
+        for child in dangling_refs:
+            graph.setdefault(cast('str', child), set())
+        return graph
+
+    def parent_graph(
+            self,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[str, set[str]]:
+        child_graph = self.child_graph(dangling='include' if dangling == 'include' else 'ignore')
+        existing = set(self.keys())
+        igraph: dict[str, set[str]] = {name: set() for name in child_graph}
+        for parent, children in child_graph.items():
+            for child in children:
+                if child in existing or dangling == 'include':
+                    igraph.setdefault(child, set()).add(parent)
+        if dangling == 'error':
+            raw = self.child_graph(dangling='include')
+            dangling_refs = set().union(*(children - existing for children in raw.values()))
+            if dangling_refs:
+                raise self._dangling_refs_error(cast('set[str]', dangling_refs), 'building parent graph')
+        return igraph
+
+    def subtree(
+            self,
+            tops: str | Sequence[str],
+            ) -> ILibraryView:
+        if isinstance(tops, str):
+            tops = (tops,)
+        keep = cast('set[str]', self.referenced_patterns(tops) - {None})
+        keep |= set(tops)
+        return self.materialize_many(tuple(keep), persist=True)
+
+    def tops(self) -> list[str]:
+        graph = self.child_graph(dangling='ignore')
+        names = set(graph)
+        not_toplevel: set[str] = set()
+        for children in graph.values():
+            not_toplevel |= children
+        return list(names - not_toplevel)
+
+    def with_ports_from_data(
+            self,
+            *,
+            layers: Sequence[tuple[int, int] | int],
+            max_depth: int = 0,
+            skip_subcells: bool = True,
+            ) -> PortsLibraryView:
+        return PortsLibraryView(
+            self,
+            layers=layers,
+            max_depth=max_depth,
+            skip_subcells=skip_subcells,
+        )
+
+    def find_refs_local(
+            self,
+            name: str,
+            parent_graph: dict[str, set[str]] | None = None,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[str, list[NDArray[numpy.float64]]]:
+        instances: dict[str, list[NDArray[numpy.float64]]] = defaultdict(list)
+        if parent_graph is None:
+            graph_mode = 'ignore' if dangling == 'ignore' else 'include'
+            parent_graph = self.parent_graph(dangling=graph_mode)
+
+        if name not in self:
+            if name not in parent_graph:
+                return instances
+            if dangling == 'error':
+                raise self._dangling_refs_error({name}, f'finding local refs for {name!r}')
+            if dangling == 'ignore':
+                return instances
+
+        for parent in parent_graph.get(name, set()):
+            if parent in self._cache:
+                for ref in self._cache[parent].refs.get(name, []):
+                    instances[parent].append(ref.as_transforms())
+                continue
+            pat = self._materialize_pattern(parent, persist=False)
+            for ref in pat.refs.get(name, []):
+                instances[parent].append(ref.as_transforms())
+        return instances
+
+    def find_refs_global(
+            self,
+            name: str,
+            order: list[str] | None = None,
+            parent_graph: dict[str, set[str]] | None = None,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[tuple[str, ...], NDArray[numpy.float64]]:
+        graph_mode = 'ignore' if dangling == 'ignore' else 'include'
+        if order is None:
+            order = self.child_order(dangling=graph_mode)
+        if parent_graph is None:
+            parent_graph = self.parent_graph(dangling=graph_mode)
+
+        if name not in self:
+            if name not in parent_graph:
+                return {}
+            if dangling == 'error':
+                raise self._dangling_refs_error({name}, f'finding global refs for {name!r}')
+            if dangling == 'ignore':
+                return {}
+
+        self_keys = set(self.keys())
+        transforms: dict[str, list[tuple[tuple[str, ...], NDArray[numpy.float64]]]]
+        transforms = defaultdict(list)
+        for parent, vals in self.find_refs_local(name, parent_graph=parent_graph, dangling=dangling).items():
+            transforms[parent] = [((name,), numpy.concatenate(vals))]
+
+        for next_name in order:
+            if next_name not in transforms:
+                continue
+            if not parent_graph.get(next_name, set()) & self_keys:
+                continue
+
+            outers = self.find_refs_local(next_name, parent_graph=parent_graph, dangling=dangling)
+            inners = transforms.pop(next_name)
+            for parent, outer in outers.items():
+                outer_tf = numpy.concatenate(outer)
+                for path, inner in inners:
+                    combined = apply_transforms(outer_tf, inner)
+                    transforms[parent].append(((next_name,) + path, combined))
+
+        result = {}
+        for parent, targets in transforms.items():
+            for path, instances in targets:
+                result[(parent,) + path] = instances
+        return result
+
+    def close(self) -> None:
+        self._source.close()
+
+    def __enter__(self) -> GdsLibrarySource:
+        return self
+
+    def __exit__(self, *_args: object) -> None:
+        self.close()
+
+
+def read(
+        stream: IO[bytes],
+        ) -> tuple[GdsLibrarySource, dict[str, Any]]:
+    source = _SourceHandle(path=None, stream=stream)
+    stream.seek(0)
+    library_info, cell_order, cells = _scan_library(stream)
+    lib = GdsLibrarySource(source=source, library_info=library_info, cell_order=cell_order, cells=cells)
+    return lib, library_info
+
+
+def readfile(
+        filename: str | pathlib.Path,
+        *,
+        use_mmap: bool = True,
+        ) -> tuple[GdsLibrarySource, dict[str, Any]]:
+    lib = GdsLibrarySource.from_file(filename, use_mmap=use_mmap)
+    return lib, lib.library_info

masque/file/gdsii_lazy_arrow.py

@@ -9,8 +9,7 @@ from __future__ import annotations
 from dataclasses import dataclass
 from typing import IO, Any, cast
 from collections import defaultdict
-from collections.abc import Callable, Iterator, Mapping, Sequence
+from collections.abc import Iterator, Sequence
-import copy
 import gzip
 import logging
 import mmap
@@ -19,13 +18,12 @@ import pathlib
 import numpy
 from numpy.typing import NDArray
 import pyarrow
-import klamath
 
-from . import gdsii, gdsii_arrow
+from . import gdsii_arrow
-from .utils import is_gzipped, tmpfile
+from .utils import is_gzipped
-from ..error import LibraryError
+from .gdsii_lazy_core import OverlayLibrary, PortsLibraryView, _pattern_children, write, writefile
-from ..library import ILibrary, ILibraryView, Library, LibraryView, dangling_mode_t
+from ..library import ILibraryView, LibraryView, dangling_mode_t
-from ..pattern import Pattern, map_targets
+from ..pattern import Pattern
 from ..utils import apply_transforms
 
 
@@ -79,22 +77,6 @@ class _ScanPayload:
     cells: dict[str, _CellScan]
     refs: _ScanRefs
 
-
-@dataclass
-class _SourceLayer:
-    library: ILibraryView
-    source_to_visible: dict[str, str]
-    visible_to_source: dict[str, str]
-    child_graph: dict[str, set[str]]
-    order: list[str]
-
-
-@dataclass(frozen=True)
-class _SourceEntry:
-    layer_index: int
-    source_name: str
-
-
 def is_available() -> bool:
     return gdsii_arrow.is_available()
 
@@ -174,30 +156,6 @@ def _extract_scan_payload(libarr: pyarrow.StructScalar) -> _ScanPayload:
         refs=ref_payload,
     )
 
-
-def _pattern_children(pat: Pattern) -> set[str]:
-    return {child for child, refs in pat.refs.items() if child is not None and refs}
-
-
-def _remap_pattern_targets(pat: Pattern, remap: Callable[[str | None], str | None]) -> Pattern:
-    if not pat.refs:
-        return pat
-    pat.refs = map_targets(pat.refs, remap)
-    return pat
-
-
-def _coerce_library_view(source: Mapping[str, Pattern] | ILibraryView) -> ILibraryView:
-    if isinstance(source, ILibraryView):
-        return source
-    return LibraryView(source)
-
-
-def _source_order(source: ILibraryView) -> list[str]:
-    if isinstance(source, ArrowLibrary):
-        return list(source.source_order())
-    return list(source.keys())
-
-
 def _make_ref_rows(
         xy: NDArray[numpy.integer[Any]],
         angle_rad: NDArray[numpy.floating[Any]],
@@ -285,6 +243,9 @@ class ArrowLibrary(ILibraryView):
         struct_range = self._payload.cells[name].struct_range
         return self._source.raw_slice(struct_range.start, struct_range.end)
 
+    def can_copy_raw_struct(self, name: str) -> bool:
+        return name not in self._cache
+
     def materialize_many(
             self,
             names: Sequence[str],
@@ -435,6 +396,34 @@ class ArrowLibrary(ILibraryView):
             not_toplevel |= children
         return list(names - not_toplevel)
 
+    def with_ports_from_data(
+            self,
+            *,
+            layers: Sequence[tuple[int, int] | int],
+            max_depth: int = 0,
+            skip_subcells: bool = True,
+            ) -> PortsLibraryView:
+        return PortsLibraryView(
+            self,
+            layers=layers,
+            max_depth=max_depth,
+            skip_subcells=skip_subcells,
+        )
+
+    def close(self) -> None:
+        data = self._source.data
+        if isinstance(data, mmap.mmap):
+            data.close()
+        if self._source.handle is not None:
+            self._source.handle.close()
+            self._source.handle = None
+
+    def __enter__(self) -> ArrowLibrary:
+        return self
+
+    def __exit__(self, *_args: object) -> None:
+        self.close()
+
     def find_refs_local(
             self,
             name: str,
@@ -517,304 +506,6 @@ class ArrowLibrary(ILibraryView):
         return result
 
 
-class OverlayLibrary(ILibrary):
-    """
-    Mutable overlay over one or more source libraries.
-
-    Source-backed cells remain lazy until accessed through `__getitem__`, at
-    which point that visible cell is promoted into an overlay-owned materialized
-    `Pattern`.
-    """
-
-    def __init__(self) -> None:
-        self._layers: list[_SourceLayer] = []
-        self._entries: dict[str, Pattern | _SourceEntry] = {}
-        self._order: list[str] = []
-        self._target_remap: dict[str, str] = {}
-
-    def __iter__(self) -> Iterator[str]:
-        return (name for name in self._order if name in self._entries)
-
-    def __len__(self) -> int:
-        return len(self._entries)
-
-    def __contains__(self, key: object) -> bool:
-        return key in self._entries
-
-    def __getitem__(self, key: str) -> Pattern:
-        return self._materialize_pattern(key, persist=True)
-
-    def __setitem__(
-            self,
-            key: str,
-            value: Pattern | Callable[[], Pattern],
-            ) -> None:
-        if key in self._entries:
-            raise LibraryError(f'"{key}" already exists in the library. Overwriting is not allowed!')
-        pattern = value() if callable(value) else value
-        self._entries[key] = pattern
-        if key not in self._order:
-            self._order.append(key)
-
-    def __delitem__(self, key: str) -> None:
-        if key not in self._entries:
-            raise KeyError(key)
-        del self._entries[key]
-
-    def _merge(self, key_self: str, other: Mapping[str, Pattern], key_other: str) -> None:
-        self[key_self] = copy.deepcopy(other[key_other])
-
-    def add_source(
-            self,
-            source: Mapping[str, Pattern] | ILibraryView,
-            *,
-            rename_theirs: Callable[[ILibraryView, str], str] | None = None,
-            ) -> dict[str, str]:
-        view = _coerce_library_view(source)
-        source_order = _source_order(view)
-        child_graph = view.child_graph(dangling='include')
-
-        source_to_visible: dict[str, str] = {}
-        visible_to_source: dict[str, str] = {}
-        rename_map: dict[str, str] = {}
-
-        for name in source_order:
-            visible = name
-            if visible in self._entries or visible in visible_to_source:
-                if rename_theirs is None:
-                    raise LibraryError(f'Conflicting name while adding source: {name!r}')
-                visible = rename_theirs(self, name)
-                if visible in self._entries or visible in visible_to_source:
-                    raise LibraryError(f'Unresolved duplicate key encountered while adding source: {name!r} -> {visible!r}')
-                rename_map[name] = visible
-            source_to_visible[name] = visible
-            visible_to_source[visible] = name
-
-        layer = _SourceLayer(
-            library=view,
-            source_to_visible=source_to_visible,
-            visible_to_source=visible_to_source,
-            child_graph=child_graph,
-            order=[source_to_visible[name] for name in source_order],
-        )
-        layer_index = len(self._layers)
-        self._layers.append(layer)
-
-        for source_name, visible_name in source_to_visible.items():
-            self._entries[visible_name] = _SourceEntry(layer_index=layer_index, source_name=source_name)
-            if visible_name not in self._order:
-                self._order.append(visible_name)
-
-        return rename_map
-
-    def rename(
-            self,
-            old_name: str,
-            new_name: str,
-            move_references: bool = False,
-            ) -> OverlayLibrary:
-        if old_name not in self._entries:
-            raise LibraryError(f'"{old_name}" does not exist in the library.')
-        if old_name == new_name:
-            return self
-        if new_name in self._entries:
-            raise LibraryError(f'"{new_name}" already exists in the library.')
-
-        entry = self._entries.pop(old_name)
-        self._entries[new_name] = entry
-        if isinstance(entry, _SourceEntry):
-            layer = self._layers[entry.layer_index]
-            layer.source_to_visible[entry.source_name] = new_name
-            del layer.visible_to_source[old_name]
-            layer.visible_to_source[new_name] = entry.source_name
-
-        idx = self._order.index(old_name)
-        self._order[idx] = new_name
-
-        if move_references:
-            self.move_references(old_name, new_name)
-        return self
-
-    def _resolve_target(self, target: str) -> str:
-        seen: set[str] = set()
-        current = target
-        while current in self._target_remap:
-            if current in seen:
-                raise LibraryError(f'Cycle encountered while resolving target remap for {target!r}')
-            seen.add(current)
-            current = self._target_remap[current]
-        return current
-
-    def _set_target_remap(self, old_target: str, new_target: str) -> None:
-        resolved_new = self._resolve_target(new_target)
-        if resolved_new == old_target:
-            raise LibraryError(f'Ref target remap would create a cycle: {old_target!r} -> {new_target!r}')
-        self._target_remap[old_target] = resolved_new
-        for key in list(self._target_remap):
-            self._target_remap[key] = self._resolve_target(self._target_remap[key])
-
-    def move_references(self, old_target: str, new_target: str) -> OverlayLibrary:
-        if old_target == new_target:
-            return self
-        self._set_target_remap(old_target, new_target)
-        for entry in list(self._entries.values()):
-            if isinstance(entry, Pattern) and old_target in entry.refs:
-                entry.refs[new_target].extend(entry.refs[old_target])
-                del entry.refs[old_target]
-        return self
-
-    def _effective_target(self, layer: _SourceLayer, target: str) -> str:
-        visible = layer.source_to_visible.get(target, target)
-        return self._resolve_target(visible)
-
-    def _materialize_pattern(self, name: str, *, persist: bool) -> Pattern:
-        if name not in self._entries:
-            raise KeyError(name)
-        entry = self._entries[name]
-        if isinstance(entry, Pattern):
-            return entry
-
-        layer = self._layers[entry.layer_index]
-        source_pat = layer.library[entry.source_name].deepcopy()
-        remap = lambda target: None if target is None else self._effective_target(layer, target)
-        pat = _remap_pattern_targets(source_pat, remap)
-        if persist:
-            self._entries[name] = pat
-        return pat
-
-    def child_graph(
-            self,
-            dangling: dangling_mode_t = 'error',
-            ) -> dict[str, set[str]]:
-        graph: dict[str, set[str]] = {}
-        for name in self._order:
-            if name not in self._entries:
-                continue
-            entry = self._entries[name]
-            if isinstance(entry, Pattern):
-                graph[name] = _pattern_children(entry)
-                continue
-            layer = self._layers[entry.layer_index]
-            children = {self._effective_target(layer, child) for child in layer.child_graph.get(entry.source_name, set())}
-            graph[name] = children
-
-        existing = set(graph)
-        dangling_refs = set().union(*(children - existing for children in graph.values()))
-        if dangling == 'error':
-            if dangling_refs:
-                raise self._dangling_refs_error(cast('set[str]', dangling_refs), 'building child graph')
-            return graph
-        if dangling == 'ignore':
-            return {name: {child for child in children if child in existing} for name, children in graph.items()}
-
-        for child in dangling_refs:
-            graph.setdefault(cast('str', child), set())
-        return graph
-
-    def parent_graph(
-            self,
-            dangling: dangling_mode_t = 'error',
-            ) -> dict[str, set[str]]:
-        child_graph = self.child_graph(dangling='include' if dangling == 'include' else 'ignore')
-        existing = set(self.keys())
-        igraph: dict[str, set[str]] = {name: set() for name in child_graph}
-        for parent, children in child_graph.items():
-            for child in children:
-                if child in existing or dangling == 'include':
-                    igraph.setdefault(child, set()).add(parent)
-        if dangling == 'error':
-            raw = self.child_graph(dangling='include')
-            dangling_refs = set().union(*(children - existing for children in raw.values()))
-            if dangling_refs:
-                raise self._dangling_refs_error(cast('set[str]', dangling_refs), 'building parent graph')
-        return igraph
-
-    def subtree(
-            self,
-            tops: str | Sequence[str],
-            ) -> ILibraryView:
-        if isinstance(tops, str):
-            tops = (tops,)
-        keep = cast('set[str]', self.referenced_patterns(tops) - {None})
-        keep |= set(tops)
-        return LibraryView({name: self[name] for name in keep})
-
-    def find_refs_local(
-            self,
-            name: str,
-            parent_graph: dict[str, set[str]] | None = None,
-            dangling: dangling_mode_t = 'error',
-            ) -> dict[str, list[NDArray[numpy.float64]]]:
-        instances: dict[str, list[NDArray[numpy.float64]]] = defaultdict(list)
-        if parent_graph is None:
-            graph_mode = 'ignore' if dangling == 'ignore' else 'include'
-            parent_graph = self.parent_graph(dangling=graph_mode)
-
-        if name not in self:
-            if name not in parent_graph:
-                return instances
-            if dangling == 'error':
-                raise self._dangling_refs_error({name}, f'finding local refs for {name!r}')
-            if dangling == 'ignore':
-                return instances
-
-        for parent in parent_graph.get(name, set()):
-            pat = self._materialize_pattern(parent, persist=False)
-            for ref in pat.refs.get(name, []):
-                instances[parent].append(ref.as_transforms())
-        return instances
-
-    def find_refs_global(
-            self,
-            name: str,
-            order: list[str] | None = None,
-            parent_graph: dict[str, set[str]] | None = None,
-            dangling: dangling_mode_t = 'error',
-            ) -> dict[tuple[str, ...], NDArray[numpy.float64]]:
-        graph_mode = 'ignore' if dangling == 'ignore' else 'include'
-        if order is None:
-            order = self.child_order(dangling=graph_mode)
-        if parent_graph is None:
-            parent_graph = self.parent_graph(dangling=graph_mode)
-
-        if name not in self:
-            if name not in parent_graph:
-                return {}
-            if dangling == 'error':
-                raise self._dangling_refs_error({name}, f'finding global refs for {name!r}')
-            if dangling == 'ignore':
-                return {}
-
-        self_keys = set(self.keys())
-        transforms: dict[str, list[tuple[tuple[str, ...], NDArray[numpy.float64]]]]
-        transforms = defaultdict(list)
-        for parent, vals in self.find_refs_local(name, parent_graph=parent_graph, dangling=dangling).items():
-            transforms[parent] = [((name,), numpy.concatenate(vals))]
-
-        for next_name in order:
-            if next_name not in transforms:
-                continue
-            if not parent_graph.get(next_name, set()) & self_keys:
-                continue
-
-            outers = self.find_refs_local(next_name, parent_graph=parent_graph, dangling=dangling)
-            inners = transforms.pop(next_name)
-            for parent, outer in outers.items():
-                outer_tf = numpy.concatenate(outer)
-                for path, inner in inners:
-                    combined = apply_transforms(outer_tf, inner)
-                    transforms[parent].append(((next_name,) + path, combined))
-
-        result = {}
-        for parent, targets in transforms.items():
-            for path, instances in targets:
-                result[(parent,) + path] = instances
-        return result
-
-    def source_order(self) -> tuple[str, ...]:
-        return tuple(name for name in self._order if name in self._entries)
-
-
 def readfile(
         filename: str | pathlib.Path,
         ) -> tuple[ArrowLibrary, dict[str, Any]]:
@@ -826,135 +517,3 @@ def load_libraryfile(
         filename: str | pathlib.Path,
         ) -> tuple[ArrowLibrary, dict[str, Any]]:
     return readfile(filename)
-
-
-def _get_write_info(
-        library: Mapping[str, Pattern] | ILibraryView,
-        *,
-        meters_per_unit: float | None,
-        logical_units_per_unit: float | None,
-        library_name: str | None,
-        ) -> tuple[float, float, str]:
-    if meters_per_unit is not None and logical_units_per_unit is not None and library_name is not None:
-        return meters_per_unit, logical_units_per_unit, library_name
-
-    infos: list[dict[str, Any]] = []
-    if isinstance(library, ArrowLibrary):
-        infos.append(library.library_info)
-    elif isinstance(library, OverlayLibrary):
-        for layer in library._layers:
-            if isinstance(layer.library, ArrowLibrary):
-                infos.append(layer.library.library_info)
-
-    if infos:
-        unit_pairs = {(info['meters_per_unit'], info['logical_units_per_unit']) for info in infos}
-        if len(unit_pairs) > 1:
-            raise LibraryError('Merged lazy GDS sources must have identical units before writing')
-        info = infos[0]
-        meters = info['meters_per_unit'] if meters_per_unit is None else meters_per_unit
-        logical = info['logical_units_per_unit'] if logical_units_per_unit is None else logical_units_per_unit
-        name = info['name'] if library_name is None else library_name
-        return meters, logical, name
-
-    if meters_per_unit is None or logical_units_per_unit is None or library_name is None:
-        raise LibraryError('meters_per_unit, logical_units_per_unit, and library_name are required for non-GDS-backed lazy writes')
-    return meters_per_unit, logical_units_per_unit, library_name
-
-
-def _can_copy_arrow_cell(library: ArrowLibrary, name: str) -> bool:
-    return name not in library._cache
-
-
-def _can_copy_overlay_cell(library: OverlayLibrary, name: str, entry: _SourceEntry) -> bool:
-    layer = library._layers[entry.layer_index]
-    if not isinstance(layer.library, ArrowLibrary):
-        return False
-    if name != entry.source_name:
-        return False
-    children = layer.child_graph.get(entry.source_name, set())
-    return all(library._effective_target(layer, child) == child for child in children)
-
-
-def _write_pattern_struct(stream: IO[bytes], name: str, pat: Pattern) -> None:
-    elements: list[klamath.elements.Element] = []
-    elements += gdsii._shapes_to_elements(pat.shapes)
-    elements += gdsii._labels_to_texts(pat.labels)
-    elements += gdsii._mrefs_to_grefs(pat.refs)
-    klamath.library.write_struct(stream, name=name.encode('ASCII'), elements=elements)
-
-
-def write(
-        library: Mapping[str, Pattern] | ILibraryView,
-        stream: IO[bytes],
-        *,
-        meters_per_unit: float | None = None,
-        logical_units_per_unit: float | None = None,
-        library_name: str | None = None,
-        ) -> None:
-    meters_per_unit, logical_units_per_unit, library_name = _get_write_info(
-        library,
-        meters_per_unit=meters_per_unit,
-        logical_units_per_unit=logical_units_per_unit,
-        library_name=library_name,
-    )
-
-    header = klamath.library.FileHeader(
-        name=library_name.encode('ASCII'),
-        user_units_per_db_unit=logical_units_per_unit,
-        meters_per_db_unit=meters_per_unit,
-    )
-    header.write(stream)
-
-    if isinstance(library, ArrowLibrary):
-        for name in library.source_order():
-            if _can_copy_arrow_cell(library, name):
-                stream.write(library.raw_struct_bytes(name))
-            else:
-                _write_pattern_struct(stream, name, library._materialize_pattern(name, persist=False))
-        klamath.records.ENDLIB.write(stream, None)
-        return
-
-    if isinstance(library, OverlayLibrary):
-        for name in library.source_order():
-            entry = library._entries[name]
-            if isinstance(entry, _SourceEntry) and _can_copy_overlay_cell(library, name, entry):
-                layer = library._layers[entry.layer_index]
-                assert isinstance(layer.library, ArrowLibrary)
-                stream.write(layer.library.raw_struct_bytes(entry.source_name))
-            else:
-                _write_pattern_struct(stream, name, library._materialize_pattern(name, persist=False))
-        klamath.records.ENDLIB.write(stream, None)
-        return
-
-    gdsii.write(cast('Mapping[str, Pattern]', library), stream, meters_per_unit, logical_units_per_unit, library_name)
-
-
-def writefile(
-        library: Mapping[str, Pattern] | ILibraryView,
-        filename: str | pathlib.Path,
-        *,
-        meters_per_unit: float | None = None,
-        logical_units_per_unit: float | None = None,
-        library_name: str | None = None,
-        ) -> None:
-    path = pathlib.Path(filename)
-
-    with tmpfile(path) as base_stream:
-        streams: tuple[Any, ...] = (base_stream,)
-        if path.suffix == '.gz':
-            stream = cast('IO[bytes]', gzip.GzipFile(filename='', mtime=0, fileobj=base_stream, mode='wb', compresslevel=6))
-            streams = (stream,) + streams
-        else:
-            stream = base_stream
-
-        try:
-            write(
-                library,
-                stream,
-                meters_per_unit=meters_per_unit,
-                logical_units_per_unit=logical_units_per_unit,
-                library_name=library_name,
-            )
-        finally:
-            for ss in streams:
-                ss.close()

masque/file/gdsii_lazy_core.py

@@ -0,0 +1,706 @@
+"""
+Shared helpers for source-backed lazy GDS views.
+
+This module contains the reusable pieces that sit between lazy source readers
+and ordinary mutable library usage:
+
+- `PortsLibraryView` layers a processed, ports-importing cache on top of a raw
+  source view without mutating the source itself
+- `OverlayLibrary` exposes a mutable library surface that can mix source-backed
+  cells with overlay-owned materialized patterns
+- the write helpers preserve source-backed copy-through behavior where
+  possible, falling back to normal pattern serialization when a cell has been
+  materialized or remapped
+
+Both the classic and Arrow-backed lazy GDS readers rely on these helpers.
+"""
+from __future__ import annotations
+
+from dataclasses import dataclass
+from typing import IO, Any, cast
+from collections import defaultdict
+from collections.abc import Callable, Iterator, Mapping, Sequence
+import copy
+import gzip
+import logging
+import pathlib
+
+import klamath
+import numpy
+from numpy.typing import NDArray
+
+from . import gdsii
+from .utils import tmpfile
+from ..error import LibraryError
+from ..library import ILibrary, ILibraryView, LibraryView, dangling_mode_t
+from ..pattern import Pattern, map_targets
+from ..utils import apply_transforms
+from ..utils.ports2data import data_to_ports
+
+
+logger = logging.getLogger(__name__)
+
+
+@dataclass
+class _SourceLayer:
+    """ One imported source layer tracked by an `OverlayLibrary`. """
+    library: ILibraryView
+    source_to_visible: dict[str, str]
+    visible_to_source: dict[str, str]
+    child_graph: dict[str, set[str]]
+    order: list[str]
+
+
+@dataclass(frozen=True)
+class _SourceEntry:
+    """ Reference to a single visible source-backed cell in an overlay. """
+    layer_index: int
+    source_name: str
+
+
+def _pattern_children(pat: Pattern) -> set[str]:
+    return {child for child, refs in pat.refs.items() if child is not None and refs}
+
+
+def _remap_pattern_targets(pat: Pattern, remap: Callable[[str | None], str | None]) -> Pattern:
+    if not pat.refs:
+        return pat
+    pat.refs = map_targets(pat.refs, remap)
+    return pat
+
+
+def _coerce_library_view(source: Mapping[str, Pattern] | ILibraryView) -> ILibraryView:
+    if isinstance(source, ILibraryView):
+        return source
+    return LibraryView(source)
+
+
+def _materialize_detached_pattern(view: ILibraryView, name: str) -> Pattern:
+    func = getattr(view, '_materialize_pattern', None)
+    if callable(func):
+        return cast('Pattern', func(name, persist=False))
+    return view[name].deepcopy()
+
+
+class PortsLibraryView(ILibraryView):
+    """
+    Read-only view which imports ports into cells on first materialization.
+
+    The wrapped source remains untouched; this view owns a separate processed
+    cache so direct-copy workflows can continue to use the raw source view.
+
+    Graph queries, source ordering, and copy-through capabilities are delegated
+    to the wrapped source whenever possible, while `__getitem__` and
+    `materialize_many()` return port-imported patterns.
+    """
+
+    def __init__(
+            self,
+            source: ILibraryView,
+            *,
+            layers: Sequence[gdsii.layer_t],
+            max_depth: int = 0,
+            skip_subcells: bool = True,
+            ) -> None:
+        self._source = source
+        self._layers = tuple(layers)
+        self._max_depth = max_depth
+        self._skip_subcells = skip_subcells
+        self._cache: dict[str, Pattern] = {}
+        self._lookups_in_progress: list[str] = []
+        if hasattr(source, 'library_info'):
+            self.library_info = cast('dict[str, Any]', getattr(source, 'library_info'))
+
+    def __getitem__(self, key: str) -> Pattern:
+        return self._materialize_pattern(key, persist=True)
+
+    def __iter__(self) -> Iterator[str]:
+        return iter(self._source)
+
+    def __len__(self) -> int:
+        return len(self._source)
+
+    def __contains__(self, key: object) -> bool:
+        return key in self._source
+
+    def _materialize_pattern(self, name: str, *, persist: bool) -> Pattern:
+        if name in self._cache:
+            return self._cache[name]
+
+        if name in self._lookups_in_progress:
+            chain = ' -> '.join(self._lookups_in_progress + [name])
+            raise LibraryError(
+                f'Detected circular reference or recursive lookup of "{name}".\n'
+                f'Lookup chain: {chain}\n'
+                'This may be caused by an invalid (cyclical) reference, or buggy code.'
+                )
+
+        self._lookups_in_progress.append(name)
+        try:
+            pat = _materialize_detached_pattern(self._source, name)
+            pat = data_to_ports(
+                layers=self._layers,
+                library=self,
+                pattern=pat,
+                name=name,
+                max_depth=self._max_depth,
+                skip_subcells=self._skip_subcells,
+            )
+        finally:
+            self._lookups_in_progress.pop()
+
+        if persist:
+            self._cache[name] = pat
+        return pat
+
+    def materialize_many(
+            self,
+            names: Sequence[str],
+            *,
+            persist: bool = True,
+            ) -> LibraryView:
+        mats = {
+            name: self._materialize_pattern(name, persist=persist)
+            for name in dict.fromkeys(names)
+        }
+        return LibraryView(mats)
+
+    def source_order(self) -> tuple[str, ...]:
+        return self._source.source_order()
+
+    def child_graph(
+            self,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[str, set[str]]:
+        return self._source.child_graph(dangling=dangling)
+
+    def parent_graph(
+            self,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[str, set[str]]:
+        return self._source.parent_graph(dangling=dangling)
+
+    def subtree(
+            self,
+            tops: str | Sequence[str],
+            ) -> ILibraryView:
+        if isinstance(tops, str):
+            tops = (tops,)
+        keep = cast('set[str]', self._source.referenced_patterns(tops) - {None})
+        keep |= set(tops)
+        return self.materialize_many(tuple(keep), persist=True)
+
+    def tops(self) -> list[str]:
+        return self._source.tops()
+
+    def find_refs_local(
+            self,
+            name: str,
+            parent_graph: dict[str, set[str]] | None = None,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[str, list[NDArray[numpy.float64]]]:
+        finder = getattr(self._source, 'find_refs_local', None)
+        if callable(finder):
+            return cast('dict[str, list[NDArray[numpy.float64]]]', finder(name, parent_graph=parent_graph, dangling=dangling))
+        return super().find_refs_local(name, parent_graph=parent_graph, dangling=dangling)
+
+    def find_refs_global(
+            self,
+            name: str,
+            order: list[str] | None = None,
+            parent_graph: dict[str, set[str]] | None = None,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[tuple[str, ...], NDArray[numpy.float64]]:
+        finder = getattr(self._source, 'find_refs_global', None)
+        if callable(finder):
+            return cast(
+                'dict[tuple[str, ...], NDArray[numpy.float64]]',
+                finder(name, order=order, parent_graph=parent_graph, dangling=dangling),
+            )
+        return super().find_refs_global(name, order=order, parent_graph=parent_graph, dangling=dangling)
+
+    def raw_struct_bytes(self, name: str) -> bytes:
+        reader = getattr(self._source, 'raw_struct_bytes', None)
+        if not callable(reader):
+            raise AttributeError('raw_struct_bytes')
+        return cast('bytes', reader(name))
+
+    def can_copy_raw_struct(self, name: str) -> bool:
+        can_copy = getattr(self._source, 'can_copy_raw_struct', None)
+        if not callable(can_copy):
+            return False
+        return bool(can_copy(name))
+
+    def close(self) -> None:
+        closer = getattr(self._source, 'close', None)
+        if callable(closer):
+            closer()
+
+    def __enter__(self) -> PortsLibraryView:
+        return self
+
+    def __exit__(self, *_args: object) -> None:
+        self.close()
+
+
+class OverlayLibrary(ILibrary):
+    """
+    Mutable overlay over one or more source libraries.
+
+    Source-backed cells remain lazy until accessed through `__getitem__`, at
+    which point that visible cell is promoted into an overlay-owned materialized
+    `Pattern`.
+
+    This is the main mutable integration surface for lazy GDS content. It lets
+    callers:
+    - expose one or more source-backed libraries behind a normal `ILibrary`
+      interface
+    - add or replace cells with overlay-owned patterns
+    - rename visible source cells
+    - remap references without immediately rewriting untouched source structs
+    """
+
+    def __init__(self) -> None:
+        self._layers: list[_SourceLayer] = []
+        self._entries: dict[str, Pattern | _SourceEntry] = {}
+        self._order: list[str] = []
+        self._target_remap: dict[str, str] = {}
+
+    def __iter__(self) -> Iterator[str]:
+        return (name for name in self._order if name in self._entries)
+
+    def __len__(self) -> int:
+        return len(self._entries)
+
+    def __contains__(self, key: object) -> bool:
+        return key in self._entries
+
+    def __getitem__(self, key: str) -> Pattern:
+        return self._materialize_pattern(key, persist=True)
+
+    def __setitem__(
+            self,
+            key: str,
+            value: Pattern | Callable[[], Pattern],
+            ) -> None:
+        if key in self._entries:
+            raise LibraryError(f'"{key}" already exists in the library. Overwriting is not allowed!')
+        pattern = value() if callable(value) else value
+        self._entries[key] = pattern
+        if key not in self._order:
+            self._order.append(key)
+
+    def __delitem__(self, key: str) -> None:
+        if key not in self._entries:
+            raise KeyError(key)
+        del self._entries[key]
+
+    def _merge(self, key_self: str, other: Mapping[str, Pattern], key_other: str) -> None:
+        self[key_self] = copy.deepcopy(other[key_other])
+
+    def add_source(
+            self,
+            source: Mapping[str, Pattern] | ILibraryView,
+            *,
+            rename_theirs: Callable[[ILibraryView, str], str] | None = None,
+            ) -> dict[str, str]:
+        view = _coerce_library_view(source)
+        source_order = list(view.source_order())
+        child_graph = view.child_graph(dangling='include')
+
+        source_to_visible: dict[str, str] = {}
+        visible_to_source: dict[str, str] = {}
+        rename_map: dict[str, str] = {}
+
+        for name in source_order:
+            visible = name
+            if visible in self._entries or visible in visible_to_source:
+                if rename_theirs is None:
+                    raise LibraryError(f'Conflicting name while adding source: {name!r}')
+                visible = rename_theirs(self, name)
+                if visible in self._entries or visible in visible_to_source:
+                    raise LibraryError(f'Unresolved duplicate key encountered while adding source: {name!r} -> {visible!r}')
+                rename_map[name] = visible
+            source_to_visible[name] = visible
+            visible_to_source[visible] = name
+
+        layer = _SourceLayer(
+            library=view,
+            source_to_visible=source_to_visible,
+            visible_to_source=visible_to_source,
+            child_graph=child_graph,
+            order=[source_to_visible[name] for name in source_order],
+        )
+        layer_index = len(self._layers)
+        self._layers.append(layer)
+
+        for source_name, visible_name in source_to_visible.items():
+            self._entries[visible_name] = _SourceEntry(layer_index=layer_index, source_name=source_name)
+            if visible_name not in self._order:
+                self._order.append(visible_name)
+
+        return rename_map
+
+    def rename(
+            self,
+            old_name: str,
+            new_name: str,
+            move_references: bool = False,
+            ) -> OverlayLibrary:
+        if old_name not in self._entries:
+            raise LibraryError(f'"{old_name}" does not exist in the library.')
+        if old_name == new_name:
+            return self
+        if new_name in self._entries:
+            raise LibraryError(f'"{new_name}" already exists in the library.')
+
+        entry = self._entries.pop(old_name)
+        self._entries[new_name] = entry
+        if isinstance(entry, _SourceEntry):
+            layer = self._layers[entry.layer_index]
+            layer.source_to_visible[entry.source_name] = new_name
+            del layer.visible_to_source[old_name]
+            layer.visible_to_source[new_name] = entry.source_name
+
+        idx = self._order.index(old_name)
+        self._order[idx] = new_name
+
+        if move_references:
+            self.move_references(old_name, new_name)
+        return self
+
+    def _resolve_target(self, target: str) -> str:
+        seen: set[str] = set()
+        current = target
+        while current in self._target_remap:
+            if current in seen:
+                raise LibraryError(f'Cycle encountered while resolving target remap for {target!r}')
+            seen.add(current)
+            current = self._target_remap[current]
+        return current
+
+    def _set_target_remap(self, old_target: str, new_target: str) -> None:
+        resolved_new = self._resolve_target(new_target)
+        if resolved_new == old_target:
+            raise LibraryError(f'Ref target remap would create a cycle: {old_target!r} -> {new_target!r}')
+        self._target_remap[old_target] = resolved_new
+        for key in list(self._target_remap):
+            self._target_remap[key] = self._resolve_target(self._target_remap[key])
+
+    def move_references(self, old_target: str, new_target: str) -> OverlayLibrary:
+        if old_target == new_target:
+            return self
+        self._set_target_remap(old_target, new_target)
+        for entry in list(self._entries.values()):
+            if isinstance(entry, Pattern) and old_target in entry.refs:
+                entry.refs[new_target].extend(entry.refs[old_target])
+                del entry.refs[old_target]
+        return self
+
+    def _effective_target(self, layer: _SourceLayer, target: str) -> str:
+        visible = layer.source_to_visible.get(target, target)
+        return self._resolve_target(visible)
+
+    def _materialize_pattern(self, name: str, *, persist: bool) -> Pattern:
+        if name not in self._entries:
+            raise KeyError(name)
+        entry = self._entries[name]
+        if isinstance(entry, Pattern):
+            return entry
+
+        layer = self._layers[entry.layer_index]
+        source_pat = layer.library[entry.source_name].deepcopy()
+        remap = lambda target: None if target is None else self._effective_target(layer, target)
+        pat = _remap_pattern_targets(source_pat, remap)
+        if persist:
+            self._entries[name] = pat
+        return pat
+
+    def child_graph(
+            self,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[str, set[str]]:
+        graph: dict[str, set[str]] = {}
+        for name in self._order:
+            if name not in self._entries:
+                continue
+            entry = self._entries[name]
+            if isinstance(entry, Pattern):
+                graph[name] = _pattern_children(entry)
+                continue
+            layer = self._layers[entry.layer_index]
+            children = {self._effective_target(layer, child) for child in layer.child_graph.get(entry.source_name, set())}
+            graph[name] = children
+
+        existing = set(graph)
+        dangling_refs = set().union(*(children - existing for children in graph.values()))
+        if dangling == 'error':
+            if dangling_refs:
+                raise self._dangling_refs_error(cast('set[str]', dangling_refs), 'building child graph')
+            return graph
+        if dangling == 'ignore':
+            return {name: {child for child in children if child in existing} for name, children in graph.items()}
+
+        for child in dangling_refs:
+            graph.setdefault(cast('str', child), set())
+        return graph
+
+    def parent_graph(
+            self,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[str, set[str]]:
+        child_graph = self.child_graph(dangling='include' if dangling == 'include' else 'ignore')
+        existing = set(self.keys())
+        igraph: dict[str, set[str]] = {name: set() for name in child_graph}
+        for parent, children in child_graph.items():
+            for child in children:
+                if child in existing or dangling == 'include':
+                    igraph.setdefault(child, set()).add(parent)
+        if dangling == 'error':
+            raw = self.child_graph(dangling='include')
+            dangling_refs = set().union(*(children - existing for children in raw.values()))
+            if dangling_refs:
+                raise self._dangling_refs_error(cast('set[str]', dangling_refs), 'building parent graph')
+        return igraph
+
+    def subtree(
+            self,
+            tops: str | Sequence[str],
+            ) -> ILibraryView:
+        if isinstance(tops, str):
+            tops = (tops,)
+        keep = cast('set[str]', self.referenced_patterns(tops) - {None})
+        keep |= set(tops)
+        return LibraryView({name: self[name] for name in keep})
+
+    def find_refs_local(
+            self,
+            name: str,
+            parent_graph: dict[str, set[str]] | None = None,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[str, list[NDArray[numpy.float64]]]:
+        instances: dict[str, list[NDArray[numpy.float64]]] = defaultdict(list)
+        if parent_graph is None:
+            graph_mode = 'ignore' if dangling == 'ignore' else 'include'
+            parent_graph = self.parent_graph(dangling=graph_mode)
+
+        if name not in self:
+            if name not in parent_graph:
+                return instances
+            if dangling == 'error':
+                raise self._dangling_refs_error({name}, f'finding local refs for {name!r}')
+            if dangling == 'ignore':
+                return instances
+
+        for parent in parent_graph.get(name, set()):
+            pat = self._materialize_pattern(parent, persist=False)
+            for ref in pat.refs.get(name, []):
+                instances[parent].append(ref.as_transforms())
+        return instances
+
+    def find_refs_global(
+            self,
+            name: str,
+            order: list[str] | None = None,
+            parent_graph: dict[str, set[str]] | None = None,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[tuple[str, ...], NDArray[numpy.float64]]:
+        graph_mode = 'ignore' if dangling == 'ignore' else 'include'
+        if order is None:
+            order = self.child_order(dangling=graph_mode)
+        if parent_graph is None:
+            parent_graph = self.parent_graph(dangling=graph_mode)
+
+        if name not in self:
+            if name not in parent_graph:
+                return {}
+            if dangling == 'error':
+                raise self._dangling_refs_error({name}, f'finding global refs for {name!r}')
+            if dangling == 'ignore':
+                return {}
+
+        self_keys = set(self.keys())
+        transforms: dict[str, list[tuple[tuple[str, ...], NDArray[numpy.float64]]]]
+        transforms = defaultdict(list)
+        for parent, vals in self.find_refs_local(name, parent_graph=parent_graph, dangling=dangling).items():
+            transforms[parent] = [((name,), numpy.concatenate(vals))]
+
+        for next_name in order:
+            if next_name not in transforms:
+                continue
+            if not parent_graph.get(next_name, set()) & self_keys:
+                continue
+
+            outers = self.find_refs_local(next_name, parent_graph=parent_graph, dangling=dangling)
+            inners = transforms.pop(next_name)
+            for parent, outer in outers.items():
+                outer_tf = numpy.concatenate(outer)
+                for path, inner in inners:
+                    combined = apply_transforms(outer_tf, inner)
+                    transforms[parent].append(((next_name,) + path, combined))
+
+        result = {}
+        for parent, targets in transforms.items():
+            for path, instances in targets:
+                result[(parent,) + path] = instances
+        return result
+
+    def source_order(self) -> tuple[str, ...]:
+        return tuple(name for name in self._order if name in self._entries)
+
+
+class BuiltOverlayLibrary(OverlayLibrary):
+    """
+    Internal overlay output returned by `BuildLibrary.build(output='overlay')`.
+
+    The type is intentionally not part of the public API. It exists so build
+    outputs can carry a `build_report` while still behaving like an
+    `OverlayLibrary`.
+    """
+
+    def __init__(self, *, build_report: Any | None = None) -> None:
+        super().__init__()
+        self.build_report = build_report
+
+
+def _iter_library_infos(library: Mapping[str, Pattern] | ILibraryView) -> Iterator[dict[str, Any]]:
+    info = getattr(library, 'library_info', None)
+    if isinstance(info, dict):
+        yield info
+    if isinstance(library, OverlayLibrary):
+        for layer in library._layers:
+            yield from _iter_library_infos(layer.library)
+
+
+def _get_write_info(
+        library: Mapping[str, Pattern] | ILibraryView,
+        *,
+        meters_per_unit: float | None,
+        logical_units_per_unit: float | None,
+        library_name: str | None,
+        ) -> tuple[float, float, str]:
+    if meters_per_unit is not None and logical_units_per_unit is not None and library_name is not None:
+        return meters_per_unit, logical_units_per_unit, library_name
+
+    infos = list(_iter_library_infos(library))
+    if infos:
+        unit_pairs = {(info['meters_per_unit'], info['logical_units_per_unit']) for info in infos}
+        if len(unit_pairs) > 1:
+            raise LibraryError('Merged lazy GDS sources must have identical units before writing')
+        info = infos[0]
+        meters = info['meters_per_unit'] if meters_per_unit is None else meters_per_unit
+        logical = info['logical_units_per_unit'] if logical_units_per_unit is None else logical_units_per_unit
+        name = info['name'] if library_name is None else library_name
+        return meters, logical, name
+
+    if meters_per_unit is None or logical_units_per_unit is None or library_name is None:
+        raise LibraryError('meters_per_unit, logical_units_per_unit, and library_name are required for non-GDS-backed lazy writes')
+    return meters_per_unit, logical_units_per_unit, library_name
+
+
+def _can_copy_raw_cell(library: Mapping[str, Pattern] | ILibraryView, name: str) -> bool:
+    can_copy = getattr(library, 'can_copy_raw_struct', None)
+    if not callable(can_copy):
+        return False
+    return bool(can_copy(name))
+
+
+def _raw_struct_bytes(library: Mapping[str, Pattern] | ILibraryView, name: str) -> bytes:
+    reader = getattr(library, 'raw_struct_bytes', None)
+    if not callable(reader):
+        raise AttributeError('raw_struct_bytes')
+    return cast('bytes', reader(name))
+
+
+def _can_copy_overlay_cell(library: OverlayLibrary, name: str, entry: _SourceEntry) -> bool:
+    layer = library._layers[entry.layer_index]
+    if name != entry.source_name:
+        return False
+    if not _can_copy_raw_cell(layer.library, entry.source_name):
+        return False
+    children = layer.child_graph.get(entry.source_name, set())
+    return all(library._effective_target(layer, child) == child for child in children)
+
+
+def _write_pattern_struct(stream: IO[bytes], name: str, pat: Pattern) -> None:
+    elements: list[klamath.elements.Element] = []
+    elements += gdsii._shapes_to_elements(pat.shapes)
+    elements += gdsii._labels_to_texts(pat.labels)
+    elements += gdsii._mrefs_to_grefs(pat.refs)
+    klamath.library.write_struct(stream, name=name.encode('ASCII'), elements=elements)
+
+
+def write(
+        library: Mapping[str, Pattern] | ILibraryView,
+        stream: IO[bytes],
+        *,
+        meters_per_unit: float | None = None,
+        logical_units_per_unit: float | None = None,
+        library_name: str | None = None,
+        ) -> None:
+    meters_per_unit, logical_units_per_unit, library_name = _get_write_info(
+        library,
+        meters_per_unit=meters_per_unit,
+        logical_units_per_unit=logical_units_per_unit,
+        library_name=library_name,
+    )
+
+    header = klamath.library.FileHeader(
+        name=library_name.encode('ASCII'),
+        user_units_per_db_unit=logical_units_per_unit,
+        meters_per_db_unit=meters_per_unit,
+    )
+    header.write(stream)
+
+    if isinstance(library, OverlayLibrary):
+        for name in library.source_order():
+            entry = library._entries[name]
+            if isinstance(entry, _SourceEntry) and _can_copy_overlay_cell(library, name, entry):
+                layer = library._layers[entry.layer_index]
+                stream.write(_raw_struct_bytes(layer.library, entry.source_name))
+            else:
+                _write_pattern_struct(stream, name, library._materialize_pattern(name, persist=False))
+        klamath.records.ENDLIB.write(stream, None)
+        return
+
+    if hasattr(library, 'raw_struct_bytes'):
+        for name in library.source_order():
+            if _can_copy_raw_cell(library, name):
+                stream.write(_raw_struct_bytes(library, name))
+            else:
+                _write_pattern_struct(stream, name, _materialize_detached_pattern(cast('ILibraryView', library), name))
+        klamath.records.ENDLIB.write(stream, None)
+        return
+
+    gdsii.write(cast('Mapping[str, Pattern]', library), stream, meters_per_unit, logical_units_per_unit, library_name)
+
+
+def writefile(
+        library: Mapping[str, Pattern] | ILibraryView,
+        filename: str | pathlib.Path,
+        *,
+        meters_per_unit: float | None = None,
+        logical_units_per_unit: float | None = None,
+        library_name: str | None = None,
+        ) -> None:
+    path = pathlib.Path(filename)
+
+    with tmpfile(path) as base_stream:
+        streams: tuple[Any, ...] = (base_stream,)
+        if path.suffix == '.gz':
+            stream = cast('IO[bytes]', gzip.GzipFile(filename='', mtime=0, fileobj=base_stream, mode='wb', compresslevel=6))
+            streams = (stream,) + streams
+        else:
+            stream = base_stream
+
+        try:
+            write(
+                library,
+                stream,
+                meters_per_unit=meters_per_unit,
+                logical_units_per_unit=logical_units_per_unit,
+                library_name=library_name,
+            )
+        finally:
+            for ss in streams:
+                ss.close()

masque/library.py

@@ -14,7 +14,7 @@ Classes include:
 - `AbstractView`: Provides a way to use []-indexing to generate abstracts for patterns in the linked
     library. Generated with `ILibraryView.abstract_view()`.
 """
-from typing import Self, TYPE_CHECKING, cast, TypeAlias, Protocol, Literal
+from typing import Self, TYPE_CHECKING, Any, cast, TypeAlias, Protocol, Literal
 from collections.abc import Iterator, Mapping, MutableMapping, Sequence, Callable
 import logging
 import re
@@ -22,12 +22,14 @@ import copy
 from pprint import pformat
 from collections import defaultdict
 from abc import ABCMeta, abstractmethod
+from contextvars import ContextVar
+from dataclasses import dataclass, replace
 from graphlib import TopologicalSorter, CycleError
 
 import numpy
 from numpy.typing import ArrayLike, NDArray
 
-from .error import LibraryError, PatternError
+from .error import BuildError, LibraryError, PatternError
 from .utils import layer_t, apply_transforms
 from .shapes import Shape, Polygon
 from .label import Label
@@ -40,6 +42,11 @@ if TYPE_CHECKING:
 
 logger = logging.getLogger(__name__)
 
+_ACTIVE_BUILD_SESSIONS: ContextVar[dict[int, '_BuildSessionLibrary'] | None] = ContextVar(
+    'masque_active_build_sessions',
+    default=None,
+)
+
 
 class visitor_function_t(Protocol):
     """ Signature for `Library.dfs()` visitor functions. """
@@ -62,6 +69,69 @@ Tree: TypeAlias = MutableMapping[str, 'Pattern']
 dangling_mode_t: TypeAlias = Literal['error', 'ignore', 'include']
 """ How helpers should handle refs whose targets are not present in the library. """
 
+emitted_via_t: TypeAlias = Literal['declaration', 'helper_write', 'tree_merge', 'source_import']
+""" Build-provenance origin tags for emitted cells. """
+
+
+@dataclass(frozen=True)
+class CellProvenance:
+    """
+    Provenance record for one cell in a completed build output.
+
+    Each output name in a `BuildReport` maps to one `CellProvenance`. The
+    record captures both where the cell came from and how its visible name was
+    chosen.
+
+    Attributes:
+        final_name: Name exposed by the completed library.
+        requested_name: First name requested for this cell during the build.
+        kind: Whether the cell came from a declaration, helper emission, or an
+            imported source library.
+        owner_declared_name: Declared cell responsible for this output cell, if
+            any. Imported source cells leave this as `None`.
+        emitted_via: High-level path by which the cell entered the output.
+        build_chain: Declared-cell dependency chain that was active when the
+            cell was emitted.
+        renamed_from: Original requested name when the final name differs.
+        source_name: Original on-source name for imported cells.
+        source_metadata: Optional source-library metadata copied through from
+            lazy GDS readers.
+    """
+    final_name: str
+    requested_name: str
+    kind: Literal['declared', 'helper', 'source']
+    owner_declared_name: str | None
+    emitted_via: emitted_via_t
+    build_chain: tuple[str, ...]
+    renamed_from: str | None = None
+    source_name: str | None = None
+    source_metadata: dict[str, Any] | None = None
+
+
+@dataclass(frozen=True)
+class BuildReport:
+    """
+    Immutable summary of one `BuildLibrary.validate()` or `.build()` run.
+
+    The report is designed to answer two questions after a build completes:
+    which declared cells depended on which other declared cells, and where each
+    output cell came from.
+
+    Attributes:
+        requested_roots: Roots explicitly requested for the run. A full
+            `build()` uses all declared cells.
+        provenance: Mapping from final output name to provenance metadata.
+        owned_cells: Mapping from declared cell name to all final output cell
+            names it owns, including helper cells emitted while that declared
+            cell was building.
+        dependency_graph: Declared-cell dependency graph discovered through
+            library-mediated reads and explicit recipe hints.
+    """
+    requested_roots: tuple[str, ...]
+    provenance: Mapping[str, CellProvenance]
+    owned_cells: Mapping[str, tuple[str, ...]]
+    dependency_graph: Mapping[str, frozenset[str]]
+
 
 SINGLE_USE_PREFIX = '_'
 """
@@ -131,6 +201,15 @@ class ILibraryView(Mapping[str, 'Pattern'], metaclass=ABCMeta):
         """
         return Abstract(name=name, ports=self[name].ports)
 
+    def source_order(self) -> tuple[str, ...]:
+        """
+        Return names in the library's preferred source order.
+
+        Source-backed views may override this to preserve on-disk ordering
+        without materializing patterns.
+        """
+        return tuple(self.keys())
+
     def dangling_refs(
             self,
             tops: str | Sequence[str] | None = None,
@@ -1388,6 +1467,819 @@ class Library(ILibrary):
         return tree, pat
 
 
+class BuiltLibrary(Library):
+    """
+    Eager library returned by `BuildLibrary.build(output='library')`.
+
+    This is a normal materialized `Library` with one additional attribute,
+    `build_report`, which records how the library was assembled from
+    declarations, helper emissions, and imported source-backed cells.
+    """
+
+    def __init__(
+            self,
+            mapping: MutableMapping[str, 'Pattern'] | None = None,
+            *,
+            build_report: BuildReport | None = None,
+            ) -> None:
+        super().__init__(mapping=mapping)
+        self.build_report = build_report
+
+
+class _CellFactory:
+    """
+    Adapter that turns a plain pattern factory into a deferred recipe factory.
+
+    Calling the wrapper captures arguments and returns a `_BuildRecipe`
+    instead of executing the function immediately.
+    """
+
+    def __init__(self, func: Callable[..., 'Pattern']) -> None:
+        self.func = func
+        self.__name__ = getattr(func, '__name__', type(self).__name__)
+        self.__doc__ = getattr(func, '__doc__')
+
+    def __call__(self, *args: Any, **kwargs: Any) -> '_BuildRecipe':
+        return _BuildRecipe(func=self.func, args=args, kwargs=kwargs)
+
+
+@dataclass
+class _BuildRecipe:
+    """ Captured deferred call to a pattern factory. """
+    func: Callable[..., 'Pattern']
+    args: tuple[Any, ...]
+    kwargs: dict[str, Any]
+    explicit_dependencies: tuple[str, ...] = ()
+
+    def depends_on(self, *names: str) -> '_BuildRecipe':
+        self.explicit_dependencies += tuple(names)
+        return self
+
+
+@dataclass(frozen=True)
+class _PatternDeclaration:
+    """ Declared cell backed by an already-built `Pattern`. """
+    pattern: 'Pattern'
+
+
+@dataclass(frozen=True)
+class _RecipeDeclaration:
+    """ Declared cell backed by a deferred recipe. """
+    recipe: _BuildRecipe
+
+
+@dataclass(frozen=True)
+class _SourceDeclaration:
+    """
+    Imported source-backed names registered with a `BuildLibrary`.
+
+    The declaration stores visible-name remapping plus pre-scanned graph
+    metadata. Underlying source cells stay lazy until a build session
+    materializes or copies them through.
+    """
+    library: ILibraryView
+    source_to_visible: Mapping[str, str]
+    visible_to_source: Mapping[str, str]
+    child_graph: Mapping[str, set[str]]
+    order: tuple[str, ...]
+
+
+def cell(func: Callable[..., 'Pattern']) -> _CellFactory:
+    """
+    Wrap a plain pattern factory so calls return deferred build recipes.
+
+    Use as either `cell(fn)(...)` or `@cell`.
+    """
+    return _CellFactory(func)
+
+
+class BuildCellsView:
+    """
+    Attribute-based declaration namespace for `BuildLibrary`.
+
+    This is the ergonomic authoring surface exposed as `builder.cells`. It is
+    intentionally write-focused: attribute assignment and deletion register
+    declarations, while attribute reads fail with guidance to build first and
+    use the returned library.
+    """
+
+    def __init__(self, library: 'BuildLibrary') -> None:
+        object.__setattr__(self, '_library', library)
+
+    def __getattr__(self, name: str) -> 'Pattern':
+        raise BuildError(
+            f'BuildLibrary.cells.{name} is write-only during authoring. '
+            'Call build() and index the returned library instead.'
+        )
+
+    def __setattr__(self, name: str, value: 'Pattern | _BuildRecipe') -> None:
+        if name.startswith('_'):
+            object.__setattr__(self, name, value)
+            return
+        self._library[name] = value
+
+    def __delattr__(self, name: str) -> None:
+        if name.startswith('_'):
+            raise AttributeError(name)
+        del self._library[name]
+
+
+class BuildLibrary(ILibrary):
+    """
+    Two-phase declaration surface for mixed imported/generated libraries.
+
+    A `BuildLibrary` collects three kinds of inputs:
+    - direct declared `Pattern` objects
+    - deferred recipes created with `cell(...)`
+    - imported source-backed library views added with `add_source(...)`
+
+    The builder itself is not a normal readable library during authoring.
+    Instead, `validate()` and `build()` create a temporary build-session library
+    that recipes can read from and write helper cells into while dependencies
+    are resolved. `build()` then freezes the builder on success and returns a
+    normal library-like object carrying a `build_report`.
+    """
+
+    def __init__(self, *, check_on_register: bool = False) -> None:
+        self.check_on_register = check_on_register
+        self.cells = BuildCellsView(self)
+        self.last_build_report: BuildReport | None = None
+        self._frozen = False
+        self._declarations: dict[str, _PatternDeclaration | _RecipeDeclaration] = {}
+        self._sources: list[_SourceDeclaration] = []
+        self._names: set[str] = set()
+        self._order: list[str] = []
+
+    def _active_session(self) -> '_BuildSessionLibrary | None':
+        sessions = _ACTIVE_BUILD_SESSIONS.get()
+        if sessions is None:
+            return None
+        return sessions.get(id(self))
+
+    def _require_active_session(self, operation: str) -> '_BuildSessionLibrary':
+        session = self._active_session()
+        if session is None:
+            raise BuildError(
+                f'BuildLibrary.{operation}() is only available while validate() or build() is running. '
+                'Use the built output library for reads.'
+            )
+        return session
+
+    def _assert_editable(self) -> None:
+        if self._frozen:
+            raise BuildError('This BuildLibrary has already been built successfully and is now frozen.')
+
+    def __iter__(self) -> Iterator[str]:
+        session = self._active_session()
+        if session is not None:
+            return iter(session)
+        return iter(self._order)
+
+    def __len__(self) -> int:
+        session = self._active_session()
+        if session is not None:
+            return len(session)
+        return len(self._names)
+
+    def __contains__(self, key: object) -> bool:
+        session = self._active_session()
+        if session is not None:
+            return key in session
+        return key in self._names
+
+    def __getitem__(self, key: str) -> 'Pattern':
+        return self._require_active_session('__getitem__')[key]
+
+    def __setitem__(
+            self,
+            key: str,
+            value: 'Pattern | _BuildRecipe | Callable[[], Pattern]',
+            ) -> None:
+        session = self._active_session()
+        if session is not None:
+            session[key] = value
+            return
+
+        self._assert_editable()
+        if key in self._names:
+            raise LibraryError(f'"{key}" already exists in the builder. Overwriting is not allowed!')
+
+        declaration: _PatternDeclaration | _RecipeDeclaration
+        if isinstance(value, _BuildRecipe):
+            declaration = _RecipeDeclaration(value)
+        else:
+            if callable(value):
+                raise TypeError('BuildLibrary recipes must be wrapped with cell(fn)(...) or @cell.')
+            declaration = _PatternDeclaration(value)
+
+        self._declarations[key] = declaration
+        self._names.add(key)
+        self._order.append(key)
+
+        if self.check_on_register:
+            try:
+                self.validate(names=(key,))
+            except Exception:
+                del self._declarations[key]
+                self._names.remove(key)
+                self._order.remove(key)
+                raise
+
+    def __delitem__(self, key: str) -> None:
+        session = self._active_session()
+        if session is not None:
+            del session[key]
+            return
+
+        self._assert_editable()
+        if key not in self._declarations:
+            raise KeyError(key)
+        del self._declarations[key]
+        self._names.remove(key)
+        self._order.remove(key)
+
+    def _merge(self, key_self: str, other: Mapping[str, 'Pattern'], key_other: str) -> None:
+        session = self._active_session()
+        if session is not None:
+            session._merge(key_self, other, key_other)
+            return
+        self[key_self] = copy.deepcopy(other[key_other])
+
+    def add(
+            self,
+            other: Mapping[str, 'Pattern'],
+            rename_theirs: Callable[['ILibraryView', str], str] = _rename_patterns,
+            mutate_other: bool = False,
+            ) -> dict[str, str]:
+        session = self._active_session()
+        if session is not None:
+            return session.add(other, rename_theirs=rename_theirs, mutate_other=mutate_other)
+        return super().add(other, rename_theirs=rename_theirs, mutate_other=mutate_other)
+
+    def rename(
+            self,
+            old_name: str,
+            new_name: str,
+            move_references: bool = False,
+            ) -> Self:
+        """
+        Rename an imported source-backed visible name during authoring.
+
+        Only imported source-backed cells may be renamed on the builder itself.
+        Declared/generated cells must be registered under their intended final
+        names. `move_references=True` is intentionally unsupported here because
+        deferred recipes and declaration internals cannot be rewritten safely.
+        """
+        session = self._active_session()
+        if session is not None:
+            session.rename(old_name, new_name, move_references=move_references)
+            return self
+
+        self._assert_editable()
+        if old_name == new_name:
+            return self
+        if old_name in self._declarations:
+            raise BuildError(
+                f'Cannot rename declared build cell "{old_name}" during authoring. '
+                'Register it under the intended final name instead.'
+            )
+        if old_name not in self._names:
+            raise LibraryError(f'"{old_name}" does not exist in the builder.')
+        if new_name in self._names:
+            raise LibraryError(f'"{new_name}" already exists in the builder.')
+        if move_references:
+            raise BuildError(
+                'BuildLibrary.rename(..., move_references=True) is not supported for imported source cells. '
+                'Builder-level renames only change the visible imported name.'
+            )
+
+        source_index = next(
+            (idx for idx, spec in enumerate(self._sources) if old_name in spec.visible_to_source),
+            None,
+        )
+        if source_index is None:
+            raise BuildError(
+                f'Cannot rename "{old_name}" during authoring because only imported source-backed '
+                'cells may be renamed on a BuildLibrary.'
+            )
+
+        spec = self._sources[source_index]
+        source_name = spec.visible_to_source[old_name]
+        source_to_visible = dict(spec.source_to_visible)
+        visible_to_source = dict(spec.visible_to_source)
+        order = list(spec.order)
+
+        source_to_visible[source_name] = new_name
+        del visible_to_source[old_name]
+        visible_to_source[new_name] = source_name
+        order[order.index(old_name)] = new_name
+
+        self._sources[source_index] = replace(
+            spec,
+            source_to_visible=source_to_visible,
+            visible_to_source=visible_to_source,
+            order=tuple(order),
+        )
+        self._names.remove(old_name)
+        self._names.add(new_name)
+        self._order[self._order.index(old_name)] = new_name
+        return self
+
+    def abstract(self, name: str) -> Abstract:
+        return self._require_active_session('abstract').abstract(name)
+
+    def resolve(
+            self,
+            other: 'Abstract | str | Pattern | TreeView',
+            append: bool = False,
+            ) -> 'Abstract | Pattern':
+        return self._require_active_session('resolve').resolve(other, append=append)
+
+    def add_source(
+            self,
+            source: Mapping[str, 'Pattern'] | ILibraryView,
+            *,
+            rename_theirs: Callable[[ILibraryView, str], str] | None = None,
+            ) -> dict[str, str]:
+        """
+        Register an imported source-backed library with the builder.
+
+        The source is not materialized immediately. Instead, its names and
+        child graph are scanned once and stored as an import declaration. The
+        source may be renamed on entry to avoid collisions with existing
+        declarations or other imported sources.
+
+        Returns:
+            Mapping of `{source_name: visible_name}` for imported names that
+            were renamed while being added.
+        """
+        self._assert_editable()
+
+        view = source if isinstance(source, ILibraryView) else LibraryView(source)
+        source_order = tuple(view.source_order())
+        child_graph = view.child_graph(dangling='include')
+
+        source_to_visible: dict[str, str] = {}
+        visible_to_source: dict[str, str] = {}
+        rename_map: dict[str, str] = {}
+        new_names: list[str] = []
+
+        for name in source_order:
+            visible = name
+            if visible in self._names or visible in visible_to_source:
+                if rename_theirs is None:
+                    raise LibraryError(f'Conflicting name while adding source: {name!r}')
+                visible = rename_theirs(self, name)
+                if visible in self._names or visible in visible_to_source:
+                    raise LibraryError(f'Unresolved duplicate key encountered while adding source: {name!r} -> {visible!r}')
+                rename_map[name] = visible
+            source_to_visible[name] = visible
+            visible_to_source[visible] = name
+            new_names.append(visible)
+
+        self._sources.append(_SourceDeclaration(
+            library=view,
+            source_to_visible=dict(source_to_visible),
+            visible_to_source=dict(visible_to_source),
+            child_graph={name: set(children) for name, children in child_graph.items()},
+            order=tuple(source_to_visible[name] for name in source_order),
+        ))
+        for visible in new_names:
+            self._names.add(visible)
+            self._order.append(visible)
+        return rename_map
+
+    def validate(
+            self,
+            names: Sequence[str] | None = None,
+            *,
+            allow_dangling: bool = False,
+            ) -> BuildReport:
+        """
+        Run the full build logic and return a `BuildReport` without producing output.
+
+        This is a dry run over the same dependency resolution and recipe
+        execution path used by `build()`. Any generated library is discarded
+        after validation completes.
+        """
+        report, _output = self._run_build(names=names, output='overlay', allow_dangling=allow_dangling, persist_output=False)
+        self.last_build_report = report
+        return report
+
+    def build(
+            self,
+            *,
+            output: Literal['overlay', 'library'] = 'overlay',
+            allow_dangling: bool = False,
+            ) -> 'BuiltLibrary | ILibrary':
+        """
+        Materialize declarations and return a usable output library.
+
+        Args:
+            output: `'overlay'` preserves imported source-backed cells where
+                possible, while `'library'` eagerly materializes the full
+                result.
+            allow_dangling: If `False`, fail the build when the completed
+                library still contains dangling references.
+        """
+        self._assert_editable()
+        report, built_output = self._run_build(names=None, output=output, allow_dangling=allow_dangling, persist_output=True)
+        self._frozen = True
+        self.last_build_report = report
+        return built_output
+
+    def _run_build(
+            self,
+            *,
+            names: Sequence[str] | None,
+            output: Literal['overlay', 'library'],
+            allow_dangling: bool,
+            persist_output: bool,
+            ) -> tuple[BuildReport, BuiltLibrary | ILibrary | None]:
+        roots = tuple(dict.fromkeys(names if names is not None else self._declarations.keys()))
+        unknown = [name for name in roots if name not in self._names]
+        if unknown:
+            raise BuildError(f'Unknown build roots requested: {unknown}')
+
+        session = _BuildSessionLibrary(self)
+        sessions = dict(_ACTIVE_BUILD_SESSIONS.get() or {})
+        sessions[id(self)] = session
+        token = _ACTIVE_BUILD_SESSIONS.set(sessions)
+        try:
+            session.materialize_many(roots)
+            if not allow_dangling:
+                session.child_graph(dangling='error')
+            if output == 'library':
+                built_output = session.to_library() if persist_output else None
+            elif persist_output:
+                built_output = session.to_overlay()
+            else:
+                built_output = None
+        finally:
+            _ACTIVE_BUILD_SESSIONS.reset(token)
+
+        report = session.build_report(roots)
+        if built_output is not None:
+            built_output.build_report = report
+        return report, built_output
+
+
+class _BuildSessionLibrary(ILibrary):
+    """
+    Internal overlay-backed library used while a `BuildLibrary` is executing.
+
+    This object provides the mutable-library surface that recipes expect while
+    also tracking declared-cell dependencies, helper-cell provenance, and
+    imported source cells. It exists only for the duration of a validation or
+    build run.
+    """
+
+    def __init__(self, builder: BuildLibrary) -> None:
+        from .file.gdsii_lazy_core import BuiltOverlayLibrary, _SourceEntry, _SourceLayer      # noqa: PLC0415
+
+        self._builder = builder
+        self._overlay = BuiltOverlayLibrary()
+        self._source_entry_type = _SourceEntry
+        self._source_layer_type = _SourceLayer
+        self._states: dict[str, Literal['unbuilt', 'building', 'built']] = {
+            name: 'unbuilt' for name in builder._declarations
+        }
+        self._declared_stack: list[str] = []
+        self._emission_stack: list[str] = []
+        self._emission_via_stack: list[emitted_via_t] = []
+        self._names = set(builder._names)
+        self._order = list(builder._order)
+        self._provenance: dict[str, CellProvenance] = {}
+        self._owned_cells: defaultdict[str, list[str]] = defaultdict(list)
+        self._dependency_graph: defaultdict[str, set[str]] = defaultdict(set)
+        self._install_sources()
+
+    def _install_sources(self) -> None:
+        for spec in self._builder._sources:
+            layer = self._source_layer_type(
+                library=spec.library,
+                source_to_visible=dict(spec.source_to_visible),
+                visible_to_source=dict(spec.visible_to_source),
+                child_graph={name: set(children) for name, children in spec.child_graph.items()},
+                order=list(spec.order),
+            )
+            layer_index = len(self._overlay._layers)
+            self._overlay._layers.append(layer)
+            source_info = getattr(spec.library, 'library_info', None)
+            source_meta = dict(source_info) if isinstance(source_info, dict) else None
+
+            for source_name, visible_name in spec.source_to_visible.items():
+                self._overlay._entries[visible_name] = self._source_entry_type(
+                    layer_index=layer_index,
+                    source_name=source_name,
+                )
+                if visible_name not in self._overlay._order:
+                    self._overlay._order.append(visible_name)
+                self._provenance[visible_name] = CellProvenance(
+                    final_name=visible_name,
+                    requested_name=source_name,
+                    kind='source',
+                    owner_declared_name=None,
+                    emitted_via='source_import',
+                    build_chain=(),
+                    renamed_from=source_name if visible_name != source_name else None,
+                    source_name=source_name,
+                    source_metadata=source_meta,
+                )
+
+    def __iter__(self) -> Iterator[str]:
+        return (name for name in self._order if name in self._names)
+
+    def __len__(self) -> int:
+        return len(self._names)
+
+    def __contains__(self, key: object) -> bool:
+        return key in self._names or key in self._overlay
+
+    def _touch_name(self, key: str) -> None:
+        if key not in self._names:
+            self._names.add(key)
+            self._order.append(key)
+
+    def _current_declared(self) -> str | None:
+        if not self._declared_stack:
+            return None
+        return self._declared_stack[-1]
+
+    def _record_dependency(self, target: str) -> None:
+        current = self._current_declared()
+        if current is None or current == target or target not in self._builder._declarations:
+            return
+        self._dependency_graph[current].add(target)
+
+    def _guard_mutable_output_name(self, key: str, *, operation: str) -> None:
+        if key in self._builder._declarations:
+            raise BuildError(f'Cannot {operation} declared build cell "{key}" during an active build session.')
+
+        provenance = self._provenance.get(key)
+        if provenance is not None and provenance.kind == 'source':
+            raise BuildError(f'Cannot {operation} imported source cell "{key}" during an active build session.')
+
+    def _remove_owned_cell(self, owner: str | None, name: str) -> None:
+        if owner is None or owner not in self._owned_cells:
+            return
+        cells = self._owned_cells[owner]
+        self._owned_cells[owner] = [cell for cell in cells if cell != name]
+        if not self._owned_cells[owner]:
+            del self._owned_cells[owner]
+
+    def rename(
+            self,
+            old_name: str,
+            new_name: str,
+            move_references: bool = False,
+            ) -> Self:
+        if old_name == new_name:
+            return self
+        if old_name not in self._overlay:
+            if old_name in self._builder._declarations:
+                self._guard_mutable_output_name(old_name, operation='rename')
+            raise LibraryError(f'"{old_name}" does not exist in the library.')
+
+        self._guard_mutable_output_name(old_name, operation='rename')
+        if new_name in self._names:
+            raise LibraryError(f'"{new_name}" already exists in the library.')
+
+        self._overlay.rename(old_name, new_name, move_references=move_references)
+        self._names.discard(old_name)
+        self._names.add(new_name)
+        if old_name in self._order:
+            idx = self._order.index(old_name)
+            self._order[idx] = new_name
+
+        provenance = self._provenance.pop(old_name)
+        requested_name = provenance.requested_name
+        self._provenance[new_name] = replace(
+            provenance,
+            final_name=new_name,
+            renamed_from=requested_name if new_name != requested_name else None,
+        )
+
+        owner = provenance.owner_declared_name
+        if owner is not None and owner in self._owned_cells:
+            self._owned_cells[owner] = [
+                new_name if cell_name == old_name else cell_name
+                for cell_name in self._owned_cells[owner]
+            ]
+        return self
+
+    def __getitem__(self, key: str) -> 'Pattern':
+        if key in self._builder._declarations:
+            self._record_dependency(key)
+            self._ensure_declared(key)
+        return self._overlay[key]
+
+    def __setitem__(
+            self,
+            key: str,
+            value: 'Pattern | Callable[[], Pattern]',
+            ) -> None:
+        if key in self._overlay:
+            raise LibraryError(f'"{key}" already exists in the library. Overwriting is not allowed!')
+        current = self._current_declared()
+        if key in self._builder._declarations and key != current:
+            raise LibraryError(f'"{key}" is reserved for a declared cell and cannot be used as a helper name.')
+
+        pattern = value() if callable(value) else value
+        self._overlay[key] = pattern
+        self._touch_name(key)
+
+        kind: Literal['declared', 'helper']
+        via = self._emission_via_stack[-1] if self._emission_via_stack else 'helper_write'
+        if current is not None and key == current:
+            kind = 'declared'
+            via = 'declaration'
+        else:
+            kind = 'helper'
+            if not self._emission_via_stack:
+                via = 'helper_write'
+
+        self._emission_stack.append(key)
+        try:
+            self._record_provenance(
+                final_name=key,
+                requested_name=key,
+                kind=kind,
+                owner_declared_name=current if kind == 'helper' else key,
+                emitted_via=via,
+                build_chain=tuple(self._declared_stack),
+                renamed_from=None,
+            )
+        finally:
+            self._emission_stack.pop()
+
+    def __delitem__(self, key: str) -> None:
+        if key not in self._overlay:
+            if key in self._builder._declarations:
+                self._guard_mutable_output_name(key, operation='delete')
+            raise KeyError(key)
+
+        self._guard_mutable_output_name(key, operation='delete')
+        provenance = self._provenance.get(key)
+        if key in self._overlay:
+            del self._overlay[key]
+        self._names.discard(key)
+        if key in self._order:
+            self._order.remove(key)
+        self._provenance.pop(key, None)
+        if provenance is not None:
+            self._remove_owned_cell(provenance.owner_declared_name, key)
+
+    def _merge(self, key_self: str, other: Mapping[str, 'Pattern'], key_other: str) -> None:
+        self[key_self] = copy.deepcopy(other[key_other])
+
+    def add(
+            self,
+            other: Mapping[str, 'Pattern'],
+            rename_theirs: Callable[['ILibraryView', str], str] = _rename_patterns,
+            mutate_other: bool = False,
+            ) -> dict[str, str]:
+        self._emission_via_stack.append('tree_merge')
+        try:
+            rename_map = super().add(other, rename_theirs=rename_theirs, mutate_other=mutate_other)
+        finally:
+            self._emission_via_stack.pop()
+
+        current = self._current_declared()
+        for old_name, new_name in rename_map.items():
+            if new_name in self._provenance:
+                self._provenance[new_name] = replace(
+                    self._provenance[new_name],
+                    requested_name=old_name,
+                    renamed_from=old_name,
+                    owner_declared_name=current if current is not None else self._provenance[new_name].owner_declared_name,
+                )
+        return rename_map
+
+    def _record_provenance(
+            self,
+            *,
+            final_name: str,
+            requested_name: str,
+            kind: Literal['declared', 'helper'],
+            owner_declared_name: str | None,
+            emitted_via: emitted_via_t,
+            build_chain: tuple[str, ...],
+            renamed_from: str | None,
+            ) -> None:
+        self._provenance[final_name] = CellProvenance(
+            final_name=final_name,
+            requested_name=requested_name,
+            kind=kind,
+            owner_declared_name=owner_declared_name,
+            emitted_via=emitted_via,
+            build_chain=build_chain,
+            renamed_from=renamed_from,
+        )
+        if owner_declared_name is not None and final_name not in self._owned_cells[owner_declared_name]:
+            self._owned_cells[owner_declared_name].append(final_name)
+
+    def _wrap_error(self, name: str, exc: Exception) -> BuildError:
+        helper = self._emission_stack[-1] if self._emission_stack else None
+        chain = tuple(self._declared_stack)
+        msg = [f'Failed while building declared cell "{name}"']
+        if helper is not None and helper != name:
+            msg.append(f'while materializing helper/output "{helper}"')
+        if chain:
+            msg.append(f'Dependency chain: {" -> ".join(chain)}')
+        msg.append(f'Cause: {exc}')
+        return BuildError('\n'.join(msg))
+
+    def _ensure_named(self, name: str) -> None:
+        if name in self._builder._declarations:
+            self._record_dependency(name)
+            self._ensure_declared(name)
+            return
+        if name in self._overlay:
+            return
+        raise BuildError(f'Missing dependency "{name}"')
+
+    def _ensure_declared(self, name: str) -> None:
+        from .pattern import Pattern        # noqa: PLC0415
+
+        state = self._states[name]
+        if state == 'built':
+            return
+        if state == 'building':
+            chain = ' -> '.join(self._declared_stack + [name])
+            raise BuildError(f'Cycle detected while building declared cells: {chain}')
+
+        declaration = self._builder._declarations[name]
+        self._states[name] = 'building'
+        self._declared_stack.append(name)
+        try:
+            if isinstance(declaration, _PatternDeclaration):
+                pattern = declaration.pattern.deepcopy()
+            else:
+                for dep in declaration.recipe.explicit_dependencies:
+                    self._ensure_named(dep)
+                pattern = declaration.recipe.func(*declaration.recipe.args, **declaration.recipe.kwargs)
+                if not isinstance(pattern, Pattern):
+                    raise BuildError(f'Recipe for "{name}" returned {type(pattern).__name__}, expected Pattern')
+
+            if name in self._overlay:
+                if self._overlay[name] is not pattern:
+                    raise BuildError(
+                        f'Recipe for "{name}" wrote a different pattern into the session under its own name.'
+                    )
+            else:
+                self[name] = pattern
+            self._states[name] = 'built'
+        except Exception as exc:
+            self._states[name] = 'unbuilt'
+            raise self._wrap_error(name, exc) from exc
+        finally:
+            self._declared_stack.pop()
+
+    def materialize_many(self, names: Sequence[str]) -> None:
+        for name in dict.fromkeys(names):
+            self._ensure_named(name)
+
+    def source_order(self) -> tuple[str, ...]:
+        return self._overlay.source_order()
+
+    def child_graph(
+            self,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[str, set[str]]:
+        return self._overlay.child_graph(dangling=dangling)
+
+    def parent_graph(
+            self,
+            dangling: dangling_mode_t = 'error',
+            ) -> dict[str, set[str]]:
+        return self._overlay.parent_graph(dangling=dangling)
+
+    def build_report(self, requested_roots: Sequence[str]) -> BuildReport:
+        dependency_graph = {
+            name: frozenset(self._dependency_graph.get(name, set()))
+            for name in self._builder._declarations
+            if name in self._dependency_graph or name in requested_roots
+        }
+        owned_cells = {
+            name: tuple(cells)
+            for name, cells in self._owned_cells.items()
+        }
+        return BuildReport(
+            requested_roots=tuple(dict.fromkeys(requested_roots)),
+            provenance=dict(self._provenance),
+            owned_cells=owned_cells,
+            dependency_graph=dependency_graph,
+        )
+
+    def to_overlay(self) -> ILibrary:
+        return self._overlay
+
+    def to_library(self) -> BuiltLibrary:
+        mapping = {name: self._overlay[name] for name in self._overlay.source_order()}
+        return BuiltLibrary(mapping)
+
+
 class LazyLibrary(ILibrary):
     """
     This class is usually used to create a library of Patterns by mapping names to

masque/shapes/arc.py

@@ -1,6 +1,7 @@
 from typing import Any, cast
 import copy
 import functools
+from enum import Enum
 
 import numpy
 from numpy import pi
@@ -13,18 +14,37 @@ from ..utils import is_scalar, annotations_t, annotations_lt, annotations_eq, re
 from ..traits import PositionableImpl
 
 
+@functools.total_ordering
+class ArcAngleRef(Enum):
+    Center = 'center'
+    FocusPos = 'focus_pos'
+    FocusNeg = 'focus_neg'
+
+    def __lt__(self, other: Any) -> bool:
+        if self.__class__ is not other.__class__:
+            return self.__class__.__name__ < other.__class__.__name__
+        order = {
+            ArcAngleRef.Center: 0,
+            ArcAngleRef.FocusPos: 1,
+            ArcAngleRef.FocusNeg: 2,
+        }
+        return order[self] < order[other]
+
+
 @functools.total_ordering
 class Arc(PositionableImpl, Shape):
     """
-    An elliptical arc, formed by cutting off an elliptical ring with two rays which exit from its
+    An elliptical arc, formed by cutting off an elliptical ring with two rays.
-     center. It has a position, two radii, a start and stop angle, a rotation, and a width.
+    By default the rays exit from its center, but they can optionally exit from one of the
+     foci of the nominal ellipse. It has a position, two radii, a start and stop angle,
+     a rotation, and a width.
 
     The radii define an ellipse; the ring is formed with radii +/- width/2.
     The rotation gives the angle from x-axis, counterclockwise, to the first (x) radius.
     The start and stop angle are measured counterclockwise from the first (x) radius.
     """
     __slots__ = (
-        '_radii', '_angles', '_width', '_rotation',
+        '_radii', '_angles', '_width', '_rotation', '_angle_ref',
         # Inherited
         '_offset', '_repetition', '_annotations',
         )
@@ -41,6 +61,11 @@ class Arc(PositionableImpl, Shape):
     _width: float
     """ Width of the arc """
 
+    _angle_ref: ArcAngleRef
+    """ Origin used by start/stop rays """
+
+    AngleRef = ArcAngleRef
+
     # radius properties
     @property
     def radii(self) -> NDArray[numpy.float64]:
@@ -113,6 +138,18 @@ class Arc(PositionableImpl, Shape):
     def stop_angle(self, val: float) -> None:
         self.angles = (self.angles[0], val)
 
+    # Angle reference property
+    @property
+    def angle_ref(self) -> ArcAngleRef:
+        """
+        Origin used to interpret start and stop angle rays.
+        """
+        return self._angle_ref
+
+    @angle_ref.setter
+    def angle_ref(self, val: ArcAngleRef | str) -> None:
+        self._angle_ref = ArcAngleRef(val)
+
     # Rotation property
     @property
     def rotation(self) -> float:
@@ -159,12 +196,14 @@ class Arc(PositionableImpl, Shape):
             rotation: float = 0,
             repetition: Repetition | None = None,
             annotations: annotations_t = None,
+            angle_ref: ArcAngleRef | str = ArcAngleRef.Center,
             ) -> None:
         self.radii = radii
         self.angles = angles
         self.width = width
         self.offset = offset
         self.rotation = rotation
+        self.angle_ref = angle_ref
         self.repetition = repetition
         self.annotations = annotations
 
@@ -186,6 +225,7 @@ class Arc(PositionableImpl, Shape):
         new._width = width
         new._offset = offset
         new._rotation = rotation % (2 * pi)
+        new._angle_ref = ArcAngleRef(angle_ref)
         new._repetition = repetition
         new._annotations = annotations
         return new
@@ -208,6 +248,7 @@ class Arc(PositionableImpl, Shape):
             and numpy.array_equal(self.angles, other.angles)
             and self.width == other.width
             and self.rotation == other.rotation
+            and self.angle_ref == other.angle_ref
             and self.repetition == other.repetition
             and annotations_eq(self.annotations, other.annotations)
             )
@@ -224,6 +265,8 @@ class Arc(PositionableImpl, Shape):
             return tuple(self.radii) < tuple(other.radii)
         if not numpy.array_equal(self.angles, other.angles):
             return tuple(self.angles) < tuple(other.angles)
+        if self.angle_ref != other.angle_ref:
+            return self.angle_ref < other.angle_ref
         if not numpy.array_equal(self.offset, other.offset):
             return tuple(self.offset) < tuple(other.offset)
         if self.rotation != other.rotation:
@@ -379,6 +422,11 @@ class Arc(PositionableImpl, Shape):
         return self
 
     def mirror(self, axis: int = 0) -> 'Arc':
+        if self.angle_ref != ArcAngleRef.Center:
+            x_major = self.radius_x > self.radius_y
+            y_major = self.radius_y > self.radius_x
+            if (axis == 0 and y_major) or (axis == 1 and x_major):
+                self._swap_focus_ref()
         self.rotation *= -1
         self.rotation += axis * pi
         self.angles *= -1
@@ -390,6 +438,7 @@ class Arc(PositionableImpl, Shape):
         return self
 
     def normalized_form(self, norm_value: float) -> normalized_shape_tuple:
+        angle_ref = self.angle_ref
         if self.radius_x < self.radius_y:
             radii = self.radii / self.radius_x
             scale = self.radius_x
@@ -400,23 +449,26 @@ class Arc(PositionableImpl, Shape):
             scale = self.radius_y
             rotation = self.rotation + pi / 2
             angles = self.angles - pi / 2
+            angle_ref = _swapped_focus_ref(angle_ref)
 
         delta_angle = angles[1] - angles[0]
         start_angle = angles[0] % (2 * pi)
         if start_angle >= pi:
             start_angle -= pi
             rotation += pi
+            angle_ref = _swapped_focus_ref(angle_ref)
 
         norm_angles = (start_angle, start_angle + delta_angle)
         rotation %= 2 * pi
         width = self.width
 
-        return ((type(self), tuple(radii.tolist()), norm_angles, width / norm_value),
+        return ((type(self), tuple(radii.tolist()), norm_angles, width / norm_value, angle_ref.value),
                 (self.offset, scale / norm_value, rotation, False),
                 lambda: Arc(
                     radii=radii * norm_value,
                     angles=norm_angles,
                     width=width * norm_value,
+                    angle_ref=angle_ref,
                     ))
 
     def get_cap_edges(self) -> NDArray[numpy.float64]:
@@ -427,27 +479,16 @@ class Arc(PositionableImpl, Shape):
              [[x2, y2], [x3, y3]]],    would create this arc from its corresponding ellipse.
             ```
         """
-        a_ranges = cast('_array2x2_t', self._angles_to_parameters())
+        a_ranges = self._angles_to_parameters()
 
-        mins = []
+        cuts = []
-        maxs = []
+        for index in range(2):
+            edge = []
             for aa, sgn in zip(a_ranges, (-1, +1), strict=True):
                 wh = sgn * self.width / 2
-            rx = self.radius_x + wh
+                edge.append(self._point_on_edge(self.radius_x + wh, self.radius_y + wh, aa[index]))
-            ry = self.radius_y + wh
+            cuts.append(edge)
-
+        return numpy.array(cuts) + self.offset
-            sin_r = numpy.sin(self.rotation)
-            cos_r = numpy.cos(self.rotation)
-            sin_a = numpy.sin(aa)
-            cos_a = numpy.cos(aa)
-
-            # arc endpoints
-            xn, xp = sorted(rx * cos_r * cos_a - ry * sin_r * sin_a)
-            yn, yp = sorted(rx * sin_r * cos_a + ry * cos_r * sin_a)
-
-            mins.append([xn, yn])
-            maxs.append([xp, yp])
-        return numpy.array([mins, maxs]) + self.offset
 
     def _angles_to_parameters(self) -> NDArray[numpy.float64]:
         """
@@ -468,7 +509,7 @@ class Arc(PositionableImpl, Shape):
             rx = self.radius_x + wh
             ry = self.radius_y + wh
 
-            a0, a1 = (numpy.arctan2(rx * numpy.sin(ai), ry * numpy.cos(ai)) for ai in self.angles)
+            a0, a1 = (self._angle_to_parameter(ai, rx, ry) for ai in self.angles)
             sign = numpy.sign(d_angle)
             if sign != numpy.sign(a1 - a0):
                 a1 += sign * 2 * pi
@@ -476,9 +517,93 @@ class Arc(PositionableImpl, Shape):
             aa.append((a0, a1))
         return numpy.array(aa, dtype=float)
 
+    def _angle_to_parameter(self, angle: float, rx: float, ry: float) -> float:
+        """
+        Convert an angle-reference ray to the ellipse parameter for one boundary edge.
+
+        Center-referenced arcs convert the ray angle from polar coordinates about the origin.
+        Focus-referenced arcs solve the forward ray/ellipse intersection from the selected
+        nominal focus and return the parameter `t` for `[rx*cos(t), ry*sin(t)]`.
+        """
+        if self.angle_ref == ArcAngleRef.Center:
+            return numpy.arctan2(rx * numpy.sin(angle), ry * numpy.cos(angle))
+
+        focus = self._focus_point()
+        if rx <= 0 or ry <= 0:
+            raise PatternError('Focus-referenced arc boundary radii must be positive')
+
+        fx, fy = focus
+        origin_position = fx * fx / (rx * rx) + fy * fy / (ry * ry)
+        if origin_position >= 1:
+            raise PatternError('Focus-referenced arc ray origin must be inside both arc boundary ellipses')
+
+        dx = numpy.cos(angle)
+        dy = numpy.sin(angle)
+        aa = dx * dx / (rx * rx) + dy * dy / (ry * ry)
+        bb = 2 * (fx * dx / (rx * rx) + fy * dy / (ry * ry))
+        cc = origin_position - 1
+        determinant = bb * bb - 4 * aa * cc
+        if determinant < 0:
+            raise PatternError('Focus-referenced arc ray does not intersect boundary ellipse')
+
+        roots = numpy.array((
+            (-bb - numpy.sqrt(determinant)) / (2 * aa),
+            (-bb + numpy.sqrt(determinant)) / (2 * aa),
+            ))
+        positive_roots = roots[roots > 0]
+        if positive_roots.size != 1:
+            raise PatternError('Focus-referenced arc ray must have exactly one forward boundary intersection')
+
+        point = focus + positive_roots[0] * numpy.array((dx, dy))
+        return numpy.arctan2(point[1] / ry, point[0] / rx)
+
+    def _focus_point(self) -> NDArray[numpy.float64]:
+        """
+        Return the selected nominal focus in the arc's unrotated local coordinates.
+
+        `FocusPos` and `FocusNeg` select opposite directions along the major axis. Circles
+        have coincident foci, so both focus modes intentionally collapse to the center.
+        """
+        if self.angle_ref == ArcAngleRef.Center or self.radius_x == self.radius_y:
+            return numpy.zeros(2)
+
+        sign = 1 if self.angle_ref == ArcAngleRef.FocusPos else -1
+        if self.radius_x > self.radius_y:
+            return numpy.array((sign * numpy.sqrt(self.radius_x * self.radius_x - self.radius_y * self.radius_y), 0.0))
+        return numpy.array((0.0, sign * numpy.sqrt(self.radius_y * self.radius_y - self.radius_x * self.radius_x)))
+
+    def _point_on_edge(self, rx: float, ry: float, tt: float) -> NDArray[numpy.float64]:
+        """
+        Return a rotated local-space point on a boundary ellipse, before applying offset.
+        """
+        sin_r = numpy.sin(self.rotation)
+        cos_r = numpy.cos(self.rotation)
+        return numpy.array((
+            rx * numpy.cos(tt) * cos_r - ry * numpy.sin(tt) * sin_r,
+            rx * numpy.cos(tt) * sin_r + ry * numpy.sin(tt) * cos_r,
+            ))
+
+    def _swap_focus_ref(self) -> None:
+        """
+        Swap `focus_pos` and `focus_neg`, leaving center-referenced arcs unchanged.
+        """
+        self.angle_ref = _swapped_focus_ref(self.angle_ref)
+
     def __repr__(self) -> str:
         angles = f' a°{numpy.rad2deg(self.angles)}'
         rotation = f' r°{numpy.rad2deg(self.rotation):g}' if self.rotation != 0 else ''
-        return f'<Arc o{self.offset} r{self.radii}{angles} w{self.width:g}{rotation}>'
+        angle_ref = f' ref={self.angle_ref.value}' if self.angle_ref != ArcAngleRef.Center else ''
+        return f'<Arc o{self.offset} r{self.radii}{angles} w{self.width:g}{rotation}{angle_ref}>'
+
+
+def _swapped_focus_ref(angle_ref: ArcAngleRef) -> ArcAngleRef:
+    """
+    Return the opposite focus reference, or center for center-referenced arcs.
+    """
+    if angle_ref == ArcAngleRef.FocusPos:
+        return ArcAngleRef.FocusNeg
+    if angle_ref == ArcAngleRef.FocusNeg:
+        return ArcAngleRef.FocusPos
+    return angle_ref
 
 _array2x2_t = tuple[tuple[float, float], tuple[float, float]]

masque/test/helpers.py

@@ -0,0 +1,27 @@
+from typing import Any
+
+import numpy
+from numpy.typing import ArrayLike, NDArray
+from numpy.testing import assert_allclose
+
+
+def closed_edge_lengths(vertices: ArrayLike) -> NDArray[numpy.float64]:
+    """
+    Return lengths for each edge of an implicitly closed vertex loop.
+    """
+    vv = numpy.asarray(vertices, dtype=float)
+    return numpy.sqrt(numpy.sum(numpy.diff(vv, axis=0, append=vv[:1]) ** 2, axis=1))
+
+
+def assert_closed_edges_within(vertices: ArrayLike, max_len: float, *, atol: float = 1e-6) -> None:
+    """
+    Assert that every edge in an implicitly closed vertex loop is no longer than `max_len`.
+    """
+    assert numpy.all(closed_edge_lengths(vertices) <= max_len + atol)
+
+
+def assert_bounds_close(shape_or_polygon: Any, expected: ArrayLike, *, atol: float = 1e-10) -> None:
+    """
+    Assert that an object's single-shape bounds match `expected`.
+    """
+    assert_allclose(shape_or_polygon.get_bounds_single(), expected, atol=atol)

masque/test/test_advanced_routing.py

@@ -1,77 +0,0 @@
-import pytest
-from numpy.testing import assert_equal
-from numpy import pi
-
-from ..builder import Pather
-from ..builder.tools import PathTool
-from ..library import Library
-from ..ports import Port
-
-
-@pytest.fixture
-def advanced_pather() -> tuple[Pather, PathTool, Library]:
-    lib = Library()
-    # Simple PathTool: 2um width on layer (1,0)
-    tool = PathTool(layer=(1, 0), width=2, ptype="wire")
-    p = Pather(lib, tools=tool, auto_render=True, auto_render_append=False)
-    return p, tool, lib
-
-
-def test_path_into_straight(advanced_pather: tuple[Pather, PathTool, Library]) -> None:
-    p, _tool, _lib = advanced_pather
-    # Facing ports
-    p.ports["src"] = Port((0, 0), 0, ptype="wire")  # Facing East (into device)
-    # Forward (+pi relative to port) is West (-x).
-    # Put destination at (-20, 0) pointing East (pi).
-    p.ports["dst"] = Port((-20, 0), pi, ptype="wire")
-
-    p.trace_into("src", "dst")
-
-    assert "src" not in p.ports
-    assert "dst" not in p.ports
-    # Pather._traceL adds a Reference to the generated pattern
-    assert len(p.pattern.refs) == 1
-
-
-def test_path_into_bend(advanced_pather: tuple[Pather, PathTool, Library]) -> None:
-    p, _tool, _lib = advanced_pather
-    # Source at (0,0) rot 0 (facing East). Forward is West (-x).
-    p.ports["src"] = Port((0, 0), 0, ptype="wire")
-    # Destination at (-20, -20) rot pi (facing West). Forward is East (+x).
-    # Wait, src forward is -x. dst is at -20, -20.
-    # To use a single bend, dst should be at some -x, -y and its rotation should be 3pi/2 (facing South).
-    # Forward for South is North (+y).
-    p.ports["dst"] = Port((-20, -20), 3 * pi / 2, ptype="wire")
-
-    p.trace_into("src", "dst")
-
-    assert "src" not in p.ports
-    assert "dst" not in p.ports
-    # `trace_into()` now batches its internal legs before auto-rendering so the operation
-    # can roll back cleanly on later failures.
-    assert len(p.pattern.refs) == 1
-
-
-def test_path_into_sbend(advanced_pather: tuple[Pather, PathTool, Library]) -> None:
-    p, _tool, _lib = advanced_pather
-    # Facing but offset ports
-    p.ports["src"] = Port((0, 0), 0, ptype="wire")  # Forward is West (-x)
-    p.ports["dst"] = Port((-20, -10), pi, ptype="wire")  # Facing East (rot pi)
-
-    p.trace_into("src", "dst")
-
-    assert "src" not in p.ports
-    assert "dst" not in p.ports
-
-
-def test_path_into_thru(advanced_pather: tuple[Pather, PathTool, Library]) -> None:
-    p, _tool, _lib = advanced_pather
-    p.ports["src"] = Port((0, 0), 0, ptype="wire")
-    p.ports["dst"] = Port((-20, 0), pi, ptype="wire")
-    p.ports["other"] = Port((10, 10), 0)
-
-    p.trace_into("src", "dst", thru="other")
-
-    assert "src" in p.ports
-    assert_equal(p.ports["src"].offset, [10, 10])
-    assert "other" not in p.ports

masque/test/test_arc.py

@@ -0,0 +1,87 @@
+import pytest
+import numpy
+from numpy import pi
+from numpy.testing import assert_equal, assert_allclose
+
+from ..error import PatternError
+from ..shapes import Arc
+from .helpers import assert_closed_edges_within
+
+
+def test_arc_init() -> None:
+    a = Arc(radii=(10, 10), angles=(0, pi / 2), width=2, offset=(0, 0))
+    assert_equal(a.radii, [10, 10])
+    assert_equal(a.angles, [0, pi / 2])
+    assert a.width == 2
+
+def test_arc_to_polygons() -> None:
+    a = Arc(radii=(10, 10), angles=(0, pi / 2), width=2)
+    polys = a.to_polygons(num_vertices=32)
+    assert len(polys) == 1
+
+    # Quarter-circle ring section with outer radius 11 and inner radius 9.
+    bounds = polys[0].get_bounds_single()
+    assert_allclose(bounds, [[0, 0], [11, 11]], atol=1e-10)
+
+def test_arc_focus_to_polygons() -> None:
+    a = Arc(radii=(10, 6), angles=(-0.4, 0.7), width=1, angle_ref=Arc.AngleRef.FocusPos)
+    polys = a.to_polygons(num_vertices=32)
+    assert len(polys) == 1
+
+    focus = numpy.array([8.0, 0.0])
+    cuts = a.get_cap_edges()
+    for angle, cut in zip(a.angles, cuts, strict=True):
+        direction = numpy.array([numpy.cos(angle), numpy.sin(angle)])
+        for point in cut:
+            delta = point - focus
+            assert_allclose(direction[0] * delta[1] - direction[1] * delta[0], 0, atol=1e-10)
+            assert numpy.dot(direction, delta) > 0
+
+def test_arc_circle_focus_matches_center() -> None:
+    center = Arc(radii=(10, 10), angles=(0, pi / 2), width=2)
+    focus = Arc(radii=(10, 10), angles=(0, pi / 2), width=2, angle_ref=Arc.AngleRef.FocusPos)
+
+    assert_allclose(focus.to_polygons(num_vertices=32)[0].vertices,
+                    center.to_polygons(num_vertices=32)[0].vertices,
+                    atol=1e-10)
+
+def test_arc_edge_cases() -> None:
+    a = Arc(radii=(10, 10), angles=(0, 3 * pi), width=2)
+    a.to_polygons(num_vertices=64)
+    bounds = a.get_bounds_single()
+    assert_allclose(bounds, [[-11, -11], [11, 11]], atol=1e-10)
+
+def test_rotated_arc_bounds_match_polygonized_geometry() -> None:
+    arc = Arc(radii=(10, 20), angles=(0, pi), width=2, rotation=pi / 4, offset=(100, 200))
+    bounds = arc.get_bounds_single()
+    poly_bounds = arc.to_polygons(num_vertices=8192)[0].get_bounds_single()
+    assert_allclose(bounds, poly_bounds, atol=1e-3)
+
+def test_rotated_focus_arc_bounds_match_polygonized_geometry() -> None:
+    arc = Arc(radii=(10, 6), angles=(-0.25, 1.1), width=1, rotation=pi / 4,
+              offset=(100, 200), angle_ref=Arc.AngleRef.FocusPos)
+    bounds = arc.get_bounds_single()
+    poly_bounds = arc.to_polygons(num_vertices=8192)[0].get_bounds_single()
+    assert_allclose(bounds, poly_bounds, atol=1e-3)
+
+def test_arc_polygonization_rejects_nan_implied_arclen() -> None:
+    arc = Arc(radii=(10, 20), angles=(0, numpy.nan), width=2)
+    with pytest.raises(PatternError, match='valid max_arclen'):
+        arc.to_polygons(num_vertices=24)
+
+def test_focus_arc_rejects_focus_outside_inner_boundary() -> None:
+    arc = Arc(radii=(10, 5), angles=(0, 1), width=6, angle_ref=Arc.AngleRef.FocusPos)
+    with pytest.raises(PatternError, match='inside both arc boundary ellipses'):
+        arc.to_polygons(num_vertices=24)
+
+def test_focus_arc_max_arclen_limits_segments() -> None:
+    arc = Arc(radii=(10, 6), angles=(-0.25, 1.1), width=1, angle_ref=Arc.AngleRef.FocusNeg)
+    assert_closed_edges_within(arc.to_polygons(max_arclen=2)[0].vertices, 2)
+
+def test_arc_rejects_zero_radii_up_front() -> None:
+    with pytest.raises(PatternError, match='Radii must be positive'):
+        Arc(radii=(0, 5), angles=(0, 1), width=1)
+    with pytest.raises(PatternError, match='Radii must be positive'):
+        Arc(radii=(5, 0), angles=(0, 1), width=1)
+    with pytest.raises(PatternError, match='Radii must be positive'):
+        Arc(radii=(0, 0), angles=(0, 1), width=1)

masque/test/test_autotool.py

@@ -1,81 +0,0 @@
-import pytest
-from numpy.testing import assert_allclose
-from numpy import pi
-
-from ..builder import Pather
-from ..builder.tools import AutoTool
-from ..library import Library
-from ..pattern import Pattern
-from ..ports import Port
-
-
-def make_straight(length: float, width: float = 2, ptype: str = "wire") -> Pattern:
-    pat = Pattern()
-    pat.rect((1, 0), xmin=0, xmax=length, yctr=0, ly=width)
-    pat.ports["in"] = Port((0, 0), 0, ptype=ptype)
-    pat.ports["out"] = Port((length, 0), pi, ptype=ptype)
-    return pat
-
-
-@pytest.fixture
-def autotool_setup() -> tuple[Pather, AutoTool, Library]:
-    lib = Library()
-
-    # Define a simple bend
-    bend_pat = Pattern()
-    # 2x2 bend from (0,0) rot 0 to (2, -2) rot pi/2 (Clockwise)
-    bend_pat.ports["in"] = Port((0, 0), 0, ptype="wire")
-    bend_pat.ports["out"] = Port((2, -2), pi / 2, ptype="wire")
-    lib["bend"] = bend_pat
-    lib.abstract("bend")
-
-    # Define a transition (e.g., via)
-    via_pat = Pattern()
-    via_pat.ports["m1"] = Port((0, 0), 0, ptype="wire_m1")
-    via_pat.ports["m2"] = Port((1, 0), pi, ptype="wire_m2")
-    lib["via"] = via_pat
-    via_abs = lib.abstract("via")
-
-    tool_m1 = AutoTool(
-        straights=[
-            AutoTool.Straight(ptype="wire_m1", fn=lambda length: make_straight(length, ptype="wire_m1"), in_port_name="in", out_port_name="out")
-        ],
-        bends=[],
-        sbends=[],
-        transitions={("wire_m2", "wire_m1"): AutoTool.Transition(via_abs, "m2", "m1")},
-        default_out_ptype="wire_m1",
-    )
-
-    p = Pather(lib, tools=tool_m1)
-    # Start with an m2 port
-    p.ports["start"] = Port((0, 0), pi, ptype="wire_m2")
-
-    return p, tool_m1, lib
-
-
-def test_autotool_transition(autotool_setup: tuple[Pather, AutoTool, Library]) -> None:
-    p, _tool, _lib = autotool_setup
-
-    # Route m1 from an m2 port. Should trigger via.
-    # length 10. Via length is 1. So straight m1 should be 9.
-    p.straight("start", 10)
-
-    # Start at (0,0) rot pi (facing West).
-    # Forward (+pi relative to port) is East (+x).
-    # Via: m2(1,0)pi -> m1(0,0)0.
-    # Plug via m2 into start(0,0)pi: transformation rot=mod(pi-pi-pi, 2pi)=pi.
-    # rotate via by pi: m2 at (0,0), m1 at (-1, 0) rot pi.
-    # Then straight m1 of length 9 from (-1, 0) rot pi -> ends at (8, 0) rot pi.
-    # Wait, (length, 0) relative to (-1, 0) rot pi:
-    # transform (9, 0) by pi: (-9, 0).
-    # (-1, 0) + (-9, 0) = (-10, 0)? No.
-    # Let's re-calculate.
-    # start (0,0) rot pi. Direction East.
-    # via m2 is at (0,0), m1 is at (1,0).
-    # When via is plugged into start: m2 goes to (0,0).
-    # since start is pi and m2 is pi, rotation is 0.
-    # so via m1 is at (1,0) rot 0.
-    # then straight m1 length 9 from (1,0) rot 0: ends at (10, 0) rot 0.
-
-    assert_allclose(p.ports["start"].offset, [10, 0], atol=1e-10)
-    assert p.ports["start"].ptype == "wire_m1"

masque/test/test_autotool_planning.py

@@ -1,12 +1,61 @@
 import pytest
-from numpy.testing import assert_allclose
 from numpy import pi
+from numpy.testing import assert_allclose
 
 from masque.builder.tools import AutoTool
+from masque.builder.pather import Pather
+from masque.library import Library
 from masque.pattern import Pattern
 from masque.ports import Port
-from masque.library import Library
+
-from masque.builder.pather import Pather
+
+def _make_transition_straight(length: float, width: float = 2, ptype: str = "wire") -> Pattern:
+    pat = Pattern()
+    pat.rect((1, 0), xmin=0, xmax=length, yctr=0, ly=width)
+    pat.ports["in"] = Port((0, 0), 0, ptype=ptype)
+    pat.ports["out"] = Port((length, 0), pi, ptype=ptype)
+    return pat
+
+
+@pytest.fixture
+def autotool_setup() -> tuple[Pather, AutoTool, Library]:
+    lib = Library()
+
+    bend_pat = Pattern()
+    bend_pat.ports["in"] = Port((0, 0), 0, ptype="wire")
+    bend_pat.ports["out"] = Port((2, -2), pi / 2, ptype="wire")
+    lib["bend"] = bend_pat
+    lib.abstract("bend")
+
+    via_pat = Pattern()
+    via_pat.ports["m1"] = Port((0, 0), 0, ptype="wire_m1")
+    via_pat.ports["m2"] = Port((1, 0), pi, ptype="wire_m2")
+    lib["via"] = via_pat
+    via_abs = lib.abstract("via")
+
+    tool_m1 = AutoTool(
+        straights=[
+            AutoTool.Straight(ptype="wire_m1", fn=lambda length: _make_transition_straight(length, ptype="wire_m1"), in_port_name="in", out_port_name="out")
+        ],
+        bends=[],
+        sbends=[],
+        transitions={("wire_m2", "wire_m1"): AutoTool.Transition(via_abs, "m2", "m1")},
+        default_out_ptype="wire_m1",
+    )
+
+    p = Pather(lib, tools=tool_m1)
+    p.ports["start"] = Port((0, 0), pi, ptype="wire_m2")
+
+    return p, tool_m1, lib
+
+def test_autotool_transition(autotool_setup: tuple[Pather, AutoTool, Library]) -> None:
+    p, _tool, _lib = autotool_setup
+
+    p.straight("start", 10)
+
+    # Via length is 1, so the remaining wire_m1 straight length is 9.
+    assert_allclose(p.ports["start"].offset, [10, 0], atol=1e-10)
+    assert p.ports["start"].ptype == "wire_m1"
 
 def make_straight(length, width=2, ptype="wire"):
     pat = Pattern()
@@ -17,15 +66,13 @@ def make_straight(length, width=2, ptype="wire"):
 
 def make_bend(R, width=2, ptype="wire", clockwise=True):
     pat = Pattern()
-    # 90 degree arc approximation (just two rects for start and end)
+    # Rectangular approximation of a 90 degree bend.
     if clockwise:
-        # (0,0) rot 0 to (R, -R) rot pi/2
         pat.rect((1, 0), xmin=0, xmax=R, yctr=0, ly=width)
         pat.rect((1, 0), xctr=R, lx=width, ymin=-R, ymax=0)
         pat.ports["A"] = Port((0, 0), 0, ptype=ptype)
         pat.ports["B"] = Port((R, -R), pi/2, ptype=ptype)
     else:
-        # (0,0) rot 0 to (R, R) rot -pi/2
         pat.rect((1, 0), xmin=0, xmax=R, yctr=0, ly=width)
         pat.rect((1, 0), xctr=R, lx=width, ymin=0, ymax=R)
         pat.ports["A"] = Port((0, 0), 0, ptype=ptype)
@@ -36,18 +83,14 @@ def make_bend(R, width=2, ptype="wire", clockwise=True):
 def multi_bend_tool():
     lib = Library()
 
-    # Bend 1: R=2
     lib["b1"] = make_bend(2, ptype="wire")
     b1_abs = lib.abstract("b1")
-    # Bend 2: R=5
     lib["b2"] = make_bend(5, ptype="wire")
     b2_abs = lib.abstract("b2")
 
     tool = AutoTool(
         straights=[
-            # Straight 1: only for length < 10
             AutoTool.Straight(ptype="wire", fn=make_straight, in_port_name="A", out_port_name="B", length_range=(0, 10)),
-            # Straight 2: for length >= 10
             AutoTool.Straight(ptype="wire", fn=lambda l: make_straight(l, width=4), in_port_name="A", out_port_name="B", length_range=(10, 1e8))
         ],
         bends=[
@@ -60,7 +103,6 @@ def multi_bend_tool():
     )
     return tool, lib
 
-
 @pytest.fixture
 def asymmetric_transition_tool() -> AutoTool:
     lib = Library()
@@ -102,7 +144,6 @@ def asymmetric_transition_tool() -> AutoTool:
         default_out_ptype="core",
         ).add_complementary_transitions()
 
-
 def assert_trace_matches_plan(plan_port: Port, tree: Library, port_names: tuple[str, str] = ("A", "B")) -> None:
     pat = tree.top_pattern()
     out_port = pat[port_names[1]]
@@ -113,33 +154,66 @@ def assert_trace_matches_plan(plan_port: Port, tree: Library, port_names: tuple[
     assert_allclose(rot, plan_port.rotation)
     assert out_port.ptype == plan_port.ptype
 
-
 def test_autotool_planL_selection(multi_bend_tool) -> None:
     tool, _ = multi_bend_tool
 
-    # Small length: should pick straight 1 and bend 1 (R=2)
-    # L = straight + R. If L=5, straight=3.
     p, data = tool.planL(True, 5)
     assert data.straight.length_range == (0, 10)
     assert data.straight_length == 3
     assert data.bend.abstract.name == "b1"
     assert_allclose(p.offset, [5, 2])
 
-    # Large length: should pick straight 2 and bend 1 (R=2)
-    # If L=15, straight=13.
     p, data = tool.planL(True, 15)
     assert data.straight.length_range == (10, 1e8)
     assert data.straight_length == 13
     assert_allclose(p.offset, [15, 2])
 
+
+@pytest.mark.parametrize("ccw", [False, True])
+def test_autotool_traceL_matches_plan_with_post_bend_transition(ccw: bool) -> None:
+    lib = Library()
+
+    bend_pat = Pattern()
+    bend_pat.ports["A"] = Port((0, 0), 0, ptype="core")
+    bend_pat.ports["B"] = Port((2, -2), pi / 2, ptype="core")
+    lib["core_bend"] = bend_pat
+
+    trans_pat = Pattern()
+    trans_pat.ports["CORE"] = Port((0, 0), 0, ptype="core")
+    trans_pat.ports["EXT"] = Port((3, 1), pi, ptype="ext")
+    lib["out_trans"] = trans_pat
+
+    tool = AutoTool(
+        straights=[
+            AutoTool.Straight(
+                ptype="core",
+                fn=lambda length: make_straight(length, ptype="core"),
+                in_port_name="A",
+                out_port_name="B",
+                length_range=(0, 1e8),
+                ),
+            ],
+        bends=[
+            AutoTool.Bend(lib.abstract("core_bend"), "A", "B", clockwise=True, mirror=True),
+            ],
+        sbends=[],
+        transitions={
+            ("ext", "core"): AutoTool.Transition(lib.abstract("out_trans"), "EXT", "CORE"),
+            },
+        default_out_ptype="core",
+        )
+
+    plan_port, data = tool.planL(ccw, 10, out_ptype="ext")
+
+    assert data.out_transition is not None
+
+    tree = tool.traceL(ccw, 10, out_ptype="ext")
+    assert_trace_matches_plan(plan_port, tree)
+
+
 def test_autotool_planU_consistency(multi_bend_tool) -> None:
     tool, lib = multi_bend_tool
 
-    # length=10, jog=20.
-    # U-turn: Straight1 -> Bend1 -> Straight_mid -> Straight3(0) -> Bend2
-    # X = L1_total - R2 = length
-    # Y = R1 + L2_mid + R2 = jog
-
     p, data = tool.planU(20, length=10)
     assert data.ldata0.straight_length == 7
     assert data.ldata0.bend.abstract.name == "b2"
@@ -147,7 +221,6 @@ def test_autotool_planU_consistency(multi_bend_tool) -> None:
     assert data.ldata1.straight_length == 0
     assert data.ldata1.bend.abstract.name == "b1"
 
-
 def test_autotool_traceU_matches_plan_with_asymmetric_transition(asymmetric_transition_tool: AutoTool) -> None:
     tool = asymmetric_transition_tool
 
@@ -159,14 +232,9 @@ def test_autotool_traceU_matches_plan_with_asymmetric_transition(asymmetric_tran
     tree = tool.traceU(12, length=0, in_ptype="core")
     assert_trace_matches_plan(plan_port, tree)
 
-
 def test_autotool_planS_double_L(multi_bend_tool) -> None:
     tool, lib = multi_bend_tool
 
-    # length=20, jog=10. S-bend (ccw1, cw2)
-    # X = L1_total + R2 = length
-    # Y = R1 + L2_mid + R2 = jog
-
     p, data = tool.planS(20, 10)
     assert_allclose(p.offset, [20, 10])
     assert_allclose(p.rotation, pi)
@@ -175,7 +243,6 @@ def test_autotool_planS_double_L(multi_bend_tool) -> None:
     assert data.ldata1.straight_length == 0
     assert data.l2_length == 6
 
-
 def test_autotool_traceS_double_l_matches_plan_with_asymmetric_transition(asymmetric_transition_tool: AutoTool) -> None:
     tool = asymmetric_transition_tool
 
@@ -188,7 +255,6 @@ def test_autotool_traceS_double_l_matches_plan_with_asymmetric_transition(asymme
     tree = tool.traceS(4, 10, in_ptype="core")
     assert_trace_matches_plan(plan_port, tree)
 
-
 def test_autotool_planS_pure_sbend_with_transition_dx() -> None:
     lib = Library()
 
@@ -242,65 +308,3 @@ def test_autotool_planS_pure_sbend_with_transition_dx() -> None:
     assert data.straight_length == 0
     assert data.jog_remaining == 4
     assert data.in_transition is not None
-
-
-def test_renderpather_autotool_double_L(multi_bend_tool) -> None:
-    tool, lib = multi_bend_tool
-    rp = Pather(lib, tools=tool, auto_render=False)
-    rp.ports["A"] = Port((0,0), 0, ptype="wire")
-
-    # This should trigger double-L fallback in planS
-    rp.jog("A", 10, length=20)
-
-    # port_rot=0 -> forward is -x. jog=10 (left) is -y.
-    assert_allclose(rp.ports["A"].offset, [-20, -10])
-    assert_allclose(rp.ports["A"].rotation, 0) # jog rot is pi relative to input, input rot is pi relative to port.
-    # Wait, planS returns out_port at (length, jog) rot pi relative to input (0,0) rot 0.
-    # Input rot relative to port is pi.
-    # Rotate (length, jog) rot pi by pi: (-length, -jog) rot 0. Correct.
-
-    rp.render()
-    assert len(rp.pattern.refs) > 0
-
-def test_pather_uturn_fallback_no_heuristic(multi_bend_tool) -> None:
-    tool, lib = multi_bend_tool
-
-    class BasicTool(AutoTool):
-        def planU(self, *args, **kwargs):
-            raise NotImplementedError()
-
-    tool_basic = BasicTool(
-        straights=tool.straights,
-        bends=tool.bends,
-        sbends=tool.sbends,
-        transitions=tool.transitions,
-        default_out_ptype=tool.default_out_ptype
-    )
-
-    p = Pather(lib, tools=tool_basic)
-    p.ports["A"] = Port((0,0), 0, ptype="wire") # facing West (Actually East points Inwards, West is Extension)
-
-    # uturn jog=10, length=5.
-    # R=2. L1 = 5+2=7. L2 = 10-2=8.
-    p.uturn("A", 10, length=5)
-
-    # port_rot=0 -> forward is -x. jog=10 (left) is -y.
-    # L1=7 along -x -> (-7, 0). Bend1 (ccw) -> rot -pi/2 (South).
-    # L2=8 along -y -> (-7, -8). Bend2 (ccw) -> rot 0 (East).
-    # wait. CCW turn from facing South (-y): turn towards East (+x).
-    # Wait.
-    # Input facing -x. CCW turn -> face -y.
-    # Input facing -y. CCW turn -> face +x.
-    # So final rotation is 0.
-    # Bend1 (ccw) relative to -x: global offset is (-7, -2)?
-    # Let's re-run my manual calculation.
-    # Port rot 0. Wire input rot pi. Wire output relative to input:
-    # L1=7, R1=2, CCW=True. Output (7, 2) rot pi/2.
-    # Rotate wire by pi: output (-7, -2) rot 3pi/2.
-    # Second turn relative to (-7, -2) rot 3pi/2:
-    # local output (8, 2) rot pi/2.
-    # global: (-7, -2) + 8*rot(3pi/2)*x + 2*rot(3pi/2)*y
-    # = (-7, -2) + 8*(0, -1) + 2*(1, 0) = (-7, -2) + (0, -8) + (2, 0) = (-5, -10).
-    # YES! ACTUAL result was (-5, -10).
-    assert_allclose(p.ports["A"].offset, [-5, -10])
-    assert_allclose(p.ports["A"].rotation, pi)

masque/test/test_boolean.py

@@ -48,12 +48,7 @@ def test_layer_as_polygons_flatten() -> None:
 
     polys = parent.layer_as_polygons((1, 0), flatten=True, library=lib)
     assert len(polys) == 1
-    # Original child at (0,0) with rot pi/2 is still at (0,0) in its own space?
+    # Child vertices are rotated by the ref and then translated by the ref offset.
-    # No, ref.as_pattern(child) will apply the transform.
-    # Child (0,0), (1,0), (1,1) rotated pi/2 around (0,0) -> (0,0), (0,1), (-1,1)
-    # Then offset by (10,10) -> (10,10), (10,11), (9,11)
-
-    # Let's verify the vertices
     expected = numpy.array([[10, 10], [10, 11], [9, 11]])
     assert_allclose(polys[0].vertices, expected, atol=1e-10)
 

masque/test/test_build_library.py

@@ -0,0 +1,315 @@
+import pytest
+
+from ..builder import Pather
+from ..error import BuildError
+from ..library import BuildLibrary, BuiltLibrary, Library, cell
+from ..pattern import Pattern
+from ..ports import Port
+
+
+def test_build_library_traces_declared_dependencies_out_of_order() -> None:
+    builder = BuildLibrary()
+
+    def make_parent(lib: BuildLibrary) -> Pattern:
+        pat = Pattern()
+        pat.ref("child")
+        assert lib.abstract("child").name == "child"
+        return pat
+
+    builder.cells.parent = cell(make_parent)(builder)
+    builder["child"] = Pattern(ports={"p": Port((0, 0), 0)})
+
+    built = builder.build()
+
+    assert "parent" in built
+    assert "child" in built
+    assert built.build_report.dependency_graph["parent"] == frozenset({"child"})
+    assert built.build_report.provenance["parent"].kind == "declared"
+
+
+def test_build_library_tracks_helper_provenance_and_tree_merge_renames() -> None:
+    builder = BuildLibrary()
+
+    def make_top(lib: BuildLibrary) -> Pattern:
+        tree = Library({"_helper": Pattern()})
+        name_a = lib << tree
+        name_b = lib << tree
+        top = Pattern()
+        top.ref(name_a)
+        top.ref(name_b)
+        return top
+
+    builder.cells.top = cell(make_top)(builder)
+    built = builder.build()
+    report = built.build_report
+
+    helpers = [
+        prov for prov in report.provenance.values()
+        if prov.owner_declared_name == "top" and prov.kind == "helper"
+    ]
+
+    assert "top" in report.owned_cells["top"]
+    assert len(helpers) == 2
+    assert all(prov.emitted_via == "tree_merge" for prov in helpers)
+    assert any(prov.renamed_from == "_helper" for prov in helpers)
+
+
+def test_build_library_requires_build_session_for_reads_and_freezes_after_build() -> None:
+    builder = BuildLibrary()
+    builder["leaf"] = Pattern()
+
+    with pytest.raises(BuildError, match="validate\\(\\) or build\\(\\)"):
+        _ = builder["leaf"]
+
+    with pytest.raises(BuildError, match="write-only"):
+        _ = builder.cells.leaf
+
+    built = builder.build(output="library")
+
+    assert isinstance(built, BuiltLibrary)
+    assert built.build_report.requested_roots == ("leaf",)
+
+    with pytest.raises(BuildError, match="frozen"):
+        builder["later"] = Pattern()
+    with pytest.raises(BuildError, match="frozen"):
+        builder.build()
+
+
+def test_build_library_validate_is_retryable_after_failure() -> None:
+    builder = BuildLibrary()
+
+    def make_parent(lib: BuildLibrary) -> Pattern:
+        pat = Pattern()
+        pat.ref("child")
+        lib.abstract("child")
+        return pat
+
+    builder.cells.parent = cell(make_parent)(builder)
+
+    with pytest.raises(BuildError, match='Failed while building declared cell "parent"'):
+        builder.validate()
+
+    builder["child"] = Pattern(ports={"p": Port((0, 0), 0)})
+    report = builder.validate()
+
+    assert report.dependency_graph["parent"] == frozenset({"child"})
+
+
+def test_build_library_check_on_register_rolls_back_failed_declarations() -> None:
+    builder = BuildLibrary(check_on_register=True)
+
+    def make_parent(lib: BuildLibrary) -> Pattern:
+        pat = Pattern()
+        pat.ref("child")
+        lib.abstract("child")
+        return pat
+
+    with pytest.raises(BuildError, match='Failed while building declared cell "parent"'):
+        builder.cells.parent = cell(make_parent)(builder)
+
+    assert "parent" not in builder
+
+
+def test_build_library_depends_on_supports_hidden_dependencies_for_partial_validation() -> None:
+    builder = BuildLibrary()
+    builder["child"] = Pattern()
+
+    def make_parent() -> Pattern:
+        pat = Pattern()
+        pat.ref("child")
+        return pat
+
+    builder.cells.parent = cell(make_parent)().depends_on("child")
+    report = builder.validate(names=("parent",))
+
+    assert report.requested_roots == ("parent",)
+    assert report.dependency_graph["parent"] == frozenset({"child"})
+
+
+def test_build_library_validate_rejects_removed_output_argument() -> None:
+    builder = BuildLibrary()
+    builder["leaf"] = Pattern()
+
+    with pytest.raises(TypeError):
+        builder.validate(output="library")   # type: ignore[call-arg]
+
+
+def test_build_library_allows_helper_writes_via_pather() -> None:
+    builder = BuildLibrary()
+    builder["leaf"] = Pattern(ports={"a": Port((0, 0), 0)})
+
+    def make_top(lib: BuildLibrary) -> Pattern:
+        helper = Pather(library=lib, ports="leaf", name="_route")
+        top = Pattern()
+        top.ref("_route")
+        top.ref("leaf")
+        top.ports.update(helper.pattern.ports)
+        return top
+
+    builder.cells.top = cell(make_top)(builder)
+    built = builder.build()
+
+    helper_prov = built.build_report.provenance["_route"]
+    assert helper_prov.kind == "helper"
+    assert helper_prov.owner_declared_name == "top"
+
+
+def test_build_library_preserves_source_cells_and_records_source_provenance() -> None:
+    source = Library({"src": Pattern()})
+    builder = BuildLibrary()
+    builder.add_source(source)
+    builder.cells.top = cell(lambda: Pattern())()
+
+    built = builder.build()
+
+    assert "src" in built
+    assert built.build_report.provenance["src"].kind == "source"
+    assert built.build_report.provenance["src"].emitted_via == "source_import"
+
+
+def test_build_library_can_rename_imported_source_cells_during_authoring() -> None:
+    source = Library()
+    source["child"] = Pattern()
+    parent = Pattern()
+    parent.ref("child")
+    source["parent"] = parent
+
+    builder = BuildLibrary()
+    builder.add_source(source)
+    builder.rename("child", "renamed_child")
+
+    built = builder.build()
+
+    assert "renamed_child" in built
+    assert "child" not in built
+    assert "renamed_child" in built["parent"].refs
+    assert built.build_report.provenance["renamed_child"].source_name == "child"
+
+
+def test_build_library_rejects_move_references_for_source_rename() -> None:
+    builder = BuildLibrary()
+    builder.add_source(Library({"src": Pattern()}))
+
+    with pytest.raises(BuildError, match="move_references=True"):
+        builder.rename("src", "renamed_src", move_references=True)
+
+
+def test_build_library_rejects_renaming_declared_cells_during_authoring() -> None:
+    builder = BuildLibrary()
+    builder["declared"] = Pattern()
+
+    with pytest.raises(BuildError, match='Cannot rename declared build cell "declared"'):
+        builder.rename("declared", "renamed_declared")
+
+
+def test_build_library_helper_rename_updates_provenance_and_owned_cells() -> None:
+    builder = BuildLibrary()
+
+    def make_top(lib: BuildLibrary) -> Pattern:
+        lib["_helper"] = Pattern()
+        lib.rename("_helper", "final_helper")
+        top = Pattern()
+        top.ref("final_helper")
+        return top
+
+    builder.cells.top = cell(make_top)(builder)
+    built = builder.build()
+    report = built.build_report
+
+    assert "final_helper" in built
+    assert "_helper" not in built
+    assert "final_helper" in report.owned_cells["top"]
+    assert "_helper" not in report.owned_cells["top"]
+    prov = report.provenance["final_helper"]
+    assert prov.kind == "helper"
+    assert prov.requested_name == "_helper"
+    assert prov.renamed_from == "_helper"
+    assert prov.final_name == "final_helper"
+
+
+def test_build_library_helper_delete_removes_provenance_and_ownership() -> None:
+    builder = BuildLibrary()
+
+    def make_top(lib: BuildLibrary) -> Pattern:
+        lib["_helper"] = Pattern()
+        del lib["_helper"]
+        return Pattern()
+
+    builder.cells.top = cell(make_top)(builder)
+    built = builder.build()
+    report = built.build_report
+
+    assert "_helper" not in built
+    assert "_helper" not in report.provenance
+    assert report.owned_cells["top"] == ("top",)
+
+
+def test_build_library_helper_rename_after_auto_rename_preserves_requested_name() -> None:
+    builder = BuildLibrary()
+
+    def make_top(lib: BuildLibrary) -> Pattern:
+        tree = Library({"_helper": Pattern()})
+        _ = lib << tree
+        renamed = lib << tree
+        lib.rename(renamed, "final_helper")
+        top = Pattern()
+        top.ref("_helper")
+        top.ref("final_helper")
+        return top
+
+    builder.cells.top = cell(make_top)(builder)
+    built = builder.build()
+    report = built.build_report
+
+    assert "final_helper" in built
+    prov = report.provenance["final_helper"]
+    assert prov.requested_name == "_helper"
+    assert prov.renamed_from == "_helper"
+
+
+def test_build_library_rejects_renaming_declared_or_source_cells_during_build() -> None:
+    declared = BuildLibrary()
+    declared["leaf"] = Pattern()
+
+    def rename_declared(lib: BuildLibrary) -> Pattern:
+        lib.rename("leaf", "renamed_leaf")
+        return Pattern()
+
+    declared.cells.top = cell(rename_declared)(declared)
+    with pytest.raises(BuildError, match='Cannot rename declared build cell "leaf"'):
+        declared.build()
+
+    source = BuildLibrary()
+    source.add_source(Library({"src": Pattern()}))
+
+    def rename_source(lib: BuildLibrary) -> Pattern:
+        lib.rename("src", "renamed_src")
+        return Pattern()
+
+    source.cells.top = cell(rename_source)(source)
+    with pytest.raises(BuildError, match='Cannot rename imported source cell "src"'):
+        source.build()
+
+
+def test_build_library_rejects_deleting_declared_or_source_cells_during_build() -> None:
+    declared = BuildLibrary()
+    declared["leaf"] = Pattern()
+
+    def delete_declared(lib: BuildLibrary) -> Pattern:
+        del lib["leaf"]
+        return Pattern()
+
+    declared.cells.top = cell(delete_declared)(declared)
+    with pytest.raises(BuildError, match='Cannot delete declared build cell "leaf"'):
+        declared.build()
+
+    source = BuildLibrary()
+    source.add_source(Library({"src": Pattern()}))
+
+    def delete_source(lib: BuildLibrary) -> Pattern:
+        del lib["src"]
+        return Pattern()
+
+    source.cells.top = cell(delete_source)(source)
+    with pytest.raises(BuildError, match='Cannot delete imported source cell "src"'):
+        source.build()

masque/test/test_circle.py

@@ -0,0 +1,17 @@
+from numpy.testing import assert_equal, assert_allclose
+
+from ..shapes import Circle, Polygon
+
+
+def test_circle_init() -> None:
+    c = Circle(radius=10, offset=(5, 5))
+    assert c.radius == 10
+    assert_equal(c.offset, [5, 5])
+
+def test_circle_to_polygons() -> None:
+    c = Circle(radius=10)
+    polys = c.to_polygons(num_vertices=32)
+    assert len(polys) == 1
+    assert isinstance(polys[0], Polygon)
+    bounds = polys[0].get_bounds_single()
+    assert_allclose(bounds, [[-10, -10], [10, 10]], atol=1e-10)

masque/test/test_curve_polygonization.py

@@ -0,0 +1,26 @@
+from numpy import pi
+
+from ..shapes import Arc, Circle, Ellipse
+from .helpers import assert_closed_edges_within
+
+
+def test_shape_arclen() -> None:
+    e = Ellipse(radii=(10, 5))
+    polys = e.to_polygons(max_arclen=5)
+    v = polys[0].vertices
+    assert_closed_edges_within(v, 5)
+    assert len(v) > 10
+
+    a = Arc(radii=(10, 10), angles=(0, pi / 2), width=2)
+    polys = a.to_polygons(max_arclen=2)
+    assert_closed_edges_within(polys[0].vertices, 2)
+
+def test_curve_polygonizers_clamp_large_max_arclen() -> None:
+    for shape in (
+            Circle(radius=10),
+            Ellipse(radii=(10, 20)),
+            Arc(radii=(10, 20), angles=(0, 1), width=2),
+            ):
+        polys = shape.to_polygons(num_vertices=None, max_arclen=1e9)
+        assert len(polys) == 1
+        assert len(polys[0].vertices) >= 3

masque/test/test_dxf.py

@@ -26,19 +26,16 @@ def test_dxf_roundtrip(tmp_path: Path):
     lib = Library()
     pat = Pattern()
 
-    # 1. Polygon (closed)
     poly_verts = numpy.array([[0, 0], [10, 0], [10, 10], [0, 10]])
     pat.polygon("1", vertices=poly_verts)
 
-    # 2. Path (open, 3 points)
     path_verts = numpy.array([[20, 0], [30, 0], [30, 10]])
     pat.path("2", vertices=path_verts, width=2)
 
-    # 3. Path (open, 2 points) - Testing the fix for 2-point polylines
+    # Two-point paths remain paths rather than being polygonized.
     path2_verts = numpy.array([[40, 0], [50, 10]])
-    pat.path("3", vertices=path2_verts, width=0) # width 0 to be sure it's not a polygonized path if we're not careful
+    pat.path("3", vertices=path2_verts, width=0)
 
-    # 4. Ref with Grid repetition (Manhattan)
     subpat = Pattern()
     subpat.polygon("sub", vertices=[[0, 0], [1, 0], [1, 1]])
     lib["sub"] = subpat
@@ -52,38 +49,29 @@ def test_dxf_roundtrip(tmp_path: Path):
 
     read_lib, _ = dxf.readfile(dxf_file)
 
-    # In DXF read, the top level is usually called "Model"
     top_pat = read_lib.get("Model") or read_lib.get("top") or list(read_lib.values())[0]
 
-    # Verify Polygon
     polys = [s for s in top_pat.shapes["1"] if isinstance(s, Polygon)]
     assert len(polys) >= 1
     poly_read = polys[0]
     assert _matches_closed_vertices(poly_read.vertices, poly_verts)
 
-    # Verify 3-point Path
     paths = [s for s in top_pat.shapes["2"] if isinstance(s, MPath)]
     assert len(paths) >= 1
     path_read = paths[0]
     assert _matches_open_path(path_read.vertices, path_verts)
     assert path_read.width == 2
 
-    # Verify 2-point Path
     paths2 = [s for s in top_pat.shapes["3"] if isinstance(s, MPath)]
     assert len(paths2) >= 1
     path2_read = paths2[0]
     assert _matches_open_path(path2_read.vertices, path2_verts)
     assert path2_read.width == 0
 
-    # Verify Ref with Grid
-    # Finding the sub pattern name might be tricky because of how DXF stores blocks
-    # but "sub" should be in read_lib
     assert "sub" in read_lib
 
-    # Check refs in the top pattern
     found_grid = False
     for target, reflist in top_pat.refs.items():
-        # DXF names might be case-insensitive or modified, but ezdxf usually preserves them
         if target.upper() == "SUB":
             for ref in reflist:
                 if isinstance(ref.repetition, Grid):
@@ -95,16 +83,12 @@ def test_dxf_roundtrip(tmp_path: Path):
     assert found_grid, f"Manhattan Grid repetition should have been preserved. Targets: {list(top_pat.refs.keys())}"
 
 def test_dxf_manhattan_precision(tmp_path: Path):
-    # Test that float precision doesn't break Manhattan grid detection
     lib = Library()
     sub = Pattern()
     sub.polygon("1", vertices=[[0, 0], [1, 0], [1, 1]])
     lib["sub"] = sub
 
     top = Pattern()
-    # 90 degree rotation: in masque the grid is NOT rotated, so it stays [[10,0],[0,10]]
-    # In DXF, an array with rotation 90 has basis vectors [[0,10],[-10,0]].
-    # So a masque grid [[10,0],[0,10]] with ref rotation 90 matches a DXF array.
     angle = numpy.pi / 2 # 90 degrees
     top.ref("sub", offset=(0, 0), rotation=angle,
             repetition=Grid(a_vector=(10, 0), a_count=2, b_vector=(0, 10), b_count=2))
@@ -114,7 +98,7 @@ def test_dxf_manhattan_precision(tmp_path: Path):
     dxf_file = tmp_path / "precision.dxf"
     dxf.writefile(lib, "top", dxf_file)
 
-    # If the isclose() fix works, this should still be a Grid when read back
+    # Near-integer rotated basis vectors round-trip as a Manhattan Grid.
     read_lib, _ = dxf.readfile(dxf_file)
     read_top = read_lib.get("Model") or read_lib.get("top") or list(read_lib.values())[0]
 

masque/test/test_ellipse.py

@@ -0,0 +1,29 @@
+from numpy import pi
+from numpy.testing import assert_equal, assert_allclose
+
+from ..shapes import Ellipse
+
+
+def test_ellipse_init() -> None:
+    e = Ellipse(radii=(10, 5), offset=(1, 2), rotation=pi / 4)
+    assert_equal(e.radii, [10, 5])
+    assert_equal(e.offset, [1, 2])
+    assert e.rotation == pi / 4
+
+def test_ellipse_to_polygons() -> None:
+    e = Ellipse(radii=(10, 5))
+    polys = e.to_polygons(num_vertices=64)
+    assert len(polys) == 1
+    bounds = polys[0].get_bounds_single()
+    assert_allclose(bounds, [[-10, -5], [10, 5]], atol=1e-10)
+
+def test_rotated_ellipse_bounds_match_polygonized_geometry() -> None:
+    ellipse = Ellipse(radii=(10, 20), rotation=pi / 4, offset=(100, 200))
+    bounds = ellipse.get_bounds_single()
+    poly_bounds = ellipse.to_polygons(num_vertices=8192)[0].get_bounds_single()
+    assert_allclose(bounds, poly_bounds, atol=1e-3)
+
+def test_ellipse_integer_radii_scale_cleanly() -> None:
+    ellipse = Ellipse(radii=(10, 20))
+    ellipse.scale_by(0.5)
+    assert_allclose(ellipse.radii, [5, 10])

masque/test/test_file_format_roundtrip.py

@@ -11,45 +11,31 @@ from ..repetition import Grid, Arbitrary
 def create_test_library(for_gds: bool = False) -> Library:
     lib = Library()
 
-    # 1. Polygons
     pat_poly = Pattern()
     pat_poly.polygon((1, 0), vertices=[[0, 0], [10, 0], [5, 10]])
     lib["polygons"] = pat_poly
 
-    # 2. Paths with different endcaps
     pat_paths = Pattern()
-    # Flush
     pat_paths.path((2, 0), vertices=[[0, 0], [20, 0]], width=2, cap=MPath.Cap.Flush)
-    # Square
     pat_paths.path((2, 1), vertices=[[0, 10], [20, 10]], width=2, cap=MPath.Cap.Square)
-    # Circle (Only for GDS)
     if for_gds:
         pat_paths.path((2, 2), vertices=[[0, 20], [20, 20]], width=2, cap=MPath.Cap.Circle)
-    # SquareCustom
     pat_paths.path((2, 3), vertices=[[0, 30], [20, 30]], width=2, cap=MPath.Cap.SquareCustom, cap_extensions=(1, 5))
     lib["paths"] = pat_paths
 
-    # 3. Circles (only for OASIS or polygonized for GDS)
     pat_circles = Pattern()
     if for_gds:
-        # GDS writer calls to_polygons() for non-supported shapes,
-        # but we can also pre-polygonize
         pat_circles.shapes[(3, 0)].append(Circle(radius=5, offset=(10, 10)).to_polygons()[0])
     else:
         pat_circles.shapes[(3, 0)].append(Circle(radius=5, offset=(10, 10)))
     lib["circles"] = pat_circles
 
-    # 4. Refs with repetitions
     pat_refs = Pattern()
-    # Simple Ref
     pat_refs.ref("polygons", offset=(0, 0))
-    # Ref with Grid repetition
     pat_refs.ref("polygons", offset=(100, 0), repetition=Grid(a_vector=(20, 0), a_count=3, b_vector=(0, 20), b_count=2))
-    # Ref with Arbitrary repetition
     pat_refs.ref("polygons", offset=(0, 100), repetition=Arbitrary(displacements=[[0, 0], [10, 20], [30, -10]]))
     lib["refs"] = pat_refs
 
-    # 5. Shapes with repetitions (OASIS only, must be wrapped for GDS)
     pat_rep_shapes = Pattern()
     poly_rep = Polygon(vertices=[[0, 0], [5, 0], [5, 5], [0, 5]], repetition=Grid(a_vector=(10, 0), a_count=5))
     pat_rep_shapes.shapes[(4, 0)].append(poly_rep)
@@ -68,16 +54,10 @@ def test_gdsii_full_roundtrip(tmp_path: Path) -> None:
 
     read_lib, _ = gdsii.readfile(gds_file)
 
-    # Check existence
     for name in lib:
         assert name in read_lib
 
-    # Check Paths
     read_paths = read_lib["paths"]
-    # Check caps (GDS stores them as path_type)
-    # Order might be different depending on how they were written,
-    # but here they should match the order they were added if dict order is preserved.
-    # Actually, they are grouped by layer.
     p_flush = cast("MPath", read_paths.shapes[(2, 0)][0])
     assert p_flush.cap == MPath.Cap.Flush
 
@@ -92,20 +72,16 @@ def test_gdsii_full_roundtrip(tmp_path: Path) -> None:
     assert p_custom.cap_extensions is not None
     assert_allclose(p_custom.cap_extensions, (1, 5))
 
-    # Check Refs with repetitions
     read_refs = read_lib["refs"]
     assert len(read_refs.refs["polygons"]) >= 3 # Simple, Grid (becomes 1 AREF), Arbitrary (becomes 3 SREFs)
 
-    # AREF check
     arefs = [r for r in read_refs.refs["polygons"] if r.repetition is not None]
     assert len(arefs) == 1
     assert isinstance(arefs[0].repetition, Grid)
     assert arefs[0].repetition.a_count == 3
     assert arefs[0].repetition.b_count == 2
 
-    # Check wrapped shapes
+    # GDS stores repeated shapes through refs created by wrap_repeated_shapes().
-    # lib.wrap_repeated_shapes() created new patterns
-    # Original pattern "rep_shapes" now should have a Ref
     assert len(read_lib["rep_shapes"].refs) > 0
 
 def test_oasis_full_roundtrip(tmp_path: Path) -> None:
@@ -117,34 +93,17 @@ def test_oasis_full_roundtrip(tmp_path: Path) -> None:
 
     read_lib, _ = oasis.readfile(oas_file)
 
-    # Check existence
     for name in lib:
         assert name in read_lib
 
-    # Check Circle
     read_circles = read_lib["circles"]
     assert isinstance(read_circles.shapes[(3, 0)][0], Circle)
     assert read_circles.shapes[(3, 0)][0].radius == 5
 
-    # Check Path caps
     read_paths = read_lib["paths"]
     assert cast("MPath", read_paths.shapes[(2, 0)][0]).cap == MPath.Cap.Flush
     assert cast("MPath", read_paths.shapes[(2, 1)][0]).cap == MPath.Cap.Square
-    # OASIS HalfWidth is Square. masque's Square is also HalfWidth extension.
-    # Wait, Circle cap in OASIS?
-    # masque/file/oasis.py:
-    # path_cap_map = {
-    #     PathExtensionScheme.Flush: Path.Cap.Flush,
-    #     PathExtensionScheme.HalfWidth: Path.Cap.Square,
-    #     PathExtensionScheme.Arbitrary: Path.Cap.SquareCustom,
-    #     }
-    # It seems Circle cap is NOT supported in OASIS by masque currently.
-    # Let's verify what happens with Circle cap in OASIS write.
-    # _shapes_to_elements in oasis.py:
-    # path_type = next(k for k, v in path_cap_map.items() if v == shape.cap)
-    # This will raise StopIteration if Circle is not in path_cap_map.
 
-    # Check Shape repetition
     read_rep_shapes = read_lib["rep_shapes"]
     poly = read_rep_shapes.shapes[(4, 0)][0]
     assert poly.repetition is not None

masque/test/test_gdsii_lazy.py

@@ -0,0 +1,101 @@
+from pathlib import Path
+
+import numpy
+from numpy.testing import assert_allclose
+
+from ..file import gdsii, gdsii_lazy
+from ..pattern import Pattern
+from ..library import Library
+
+
+def _make_lazy_port_library() -> Library:
+    lib = Library()
+
+    leaf = Pattern()
+    leaf.label(layer=(10, 0), string='A:type1 0', offset=(5, 0))
+    lib['leaf'] = leaf
+
+    child = Pattern()
+    child.ref('leaf', offset=(10, 20), rotation=numpy.pi / 2)
+    lib['child'] = child
+
+    top = Pattern()
+    top.ref('child', offset=(100, 200))
+    lib['top'] = top
+
+    return lib
+
+
+def test_gdsii_lazy_source_exposes_order_and_graph_without_materializing(tmp_path: Path) -> None:
+    gds_file = tmp_path / 'lazy_source.gds'
+    src = _make_lazy_port_library()
+    gdsii.writefile(src, gds_file, meters_per_unit=1e-9, library_name='classic-lazy')
+
+    lib, info = gdsii_lazy.readfile(gds_file)
+
+    assert info['name'] == 'classic-lazy'
+    assert lib.source_order() == ('leaf', 'child', 'top')
+    assert lib.child_graph(dangling='ignore') == {
+        'leaf': set(),
+        'child': {'leaf'},
+        'top': {'child'},
+    }
+    assert not lib._cache
+
+    child = lib['child']
+    assert list(child.refs.keys()) == ['leaf']
+    assert set(lib._cache) == {'child'}
+
+
+def test_gdsii_lazy_ports_view_keeps_raw_source_unmodified(tmp_path: Path) -> None:
+    gds_file = tmp_path / 'lazy_ports.gds'
+    src = _make_lazy_port_library()
+    gdsii.writefile(src, gds_file, meters_per_unit=1e-9, library_name='classic-ports')
+
+    raw, _ = gdsii_lazy.readfile(gds_file)
+    processed = raw.with_ports_from_data(layers=[(10, 0)], max_depth=2)
+
+    top = processed['top']
+    assert set(top.ports) == {'A'}
+    assert_allclose(top.ports['A'].offset, [110, 225], atol=1e-10)
+    assert not raw._cache
+
+    raw_top = raw['top']
+    assert not raw_top.ports
+
+
+def test_gdsii_lazy_overlay_add_source_stays_lazy_for_processed_view(tmp_path: Path) -> None:
+    gds_file = tmp_path / 'lazy_overlay.gds'
+    src = _make_lazy_port_library()
+    gdsii.writefile(src, gds_file, meters_per_unit=1e-9, library_name='classic-overlay')
+
+    raw, _ = gdsii_lazy.readfile(gds_file)
+    processed = raw.with_ports_from_data(layers=[(10, 0)], max_depth=2)
+
+    overlay = gdsii_lazy.OverlayLibrary()
+    overlay.add_source(processed)
+
+    assert not raw._cache
+    assert not processed._cache
+
+    abstract = overlay.abstract('top')
+    assert set(abstract.ports) == {'A'}
+
+
+def test_gdsii_lazy_processed_write_roundtrips_without_explicit_units(tmp_path: Path) -> None:
+    gds_file = tmp_path / 'lazy_roundtrip.gds'
+    src = _make_lazy_port_library()
+    gdsii.writefile(src, gds_file, meters_per_unit=1e-9, library_name='classic-roundtrip')
+
+    raw, _ = gdsii_lazy.readfile(gds_file)
+    processed = raw.with_ports_from_data(layers=[(10, 0)], max_depth=2)
+
+    out_file = tmp_path / 'lazy_roundtrip_out.gds'
+    gdsii_lazy.writefile(processed, out_file)
+
+    assert out_file.read_bytes() == gds_file.read_bytes()
+
+
+def test_gdsii_removed_closure_based_lazy_loader() -> None:
+    assert not hasattr(gdsii, 'load_library')
+    assert not hasattr(gdsii, 'load_libraryfile')

masque/test/test_manhattanize.py

@@ -0,0 +1,17 @@
+import pytest
+import numpy
+
+from ..shapes import Polygon
+
+
+def test_manhattanize() -> None:
+    pytest.importorskip("float_raster")
+    pytest.importorskip("skimage.measure")
+    poly = Polygon([[0, 5], [5, 10], [10, 5], [5, 0]])
+    grid = numpy.arange(0, 11, 1)
+
+    manhattan_polys = poly.manhattanize(grid, grid)
+    assert len(manhattan_polys) >= 1
+    for mp in manhattan_polys:
+        dv = numpy.diff(mp.vertices, axis=0)
+        assert numpy.all((dv[:, 0] == 0) | (dv[:, 1] == 0))

masque/test/test_path.py

@@ -1,6 +1,6 @@
 from numpy.testing import assert_equal, assert_allclose
 
-from ..shapes import Path
+from ..shapes import Path, Path as MPath
 
 
 def test_path_init() -> None:
@@ -14,7 +14,6 @@ def test_path_to_polygons_flush() -> None:
     p = Path(vertices=[[0, 0], [10, 0]], width=2, cap=Path.Cap.Flush)
     polys = p.to_polygons()
     assert len(polys) == 1
-    # Rectangle from (0, -1) to (10, 1)
     bounds = polys[0].get_bounds_single()
     assert_equal(bounds, [[0, -1], [10, 1]])
 
@@ -23,8 +22,6 @@ def test_path_to_polygons_square() -> None:
     p = Path(vertices=[[0, 0], [10, 0]], width=2, cap=Path.Cap.Square)
     polys = p.to_polygons()
     assert len(polys) == 1
-    # Square cap adds width/2 = 1 to each end
-    # Rectangle from (-1, -1) to (11, 1)
     bounds = polys[0].get_bounds_single()
     assert_equal(bounds, [[-1, -1], [11, 1]])
 
@@ -32,11 +29,8 @@ def test_path_to_polygons_square() -> None:
 def test_path_to_polygons_circle() -> None:
     p = Path(vertices=[[0, 0], [10, 0]], width=2, cap=Path.Cap.Circle)
     polys = p.to_polygons(num_vertices=32)
-    # Path.to_polygons for Circle cap returns 1 polygon for the path + polygons for the caps
     assert len(polys) >= 3
 
-    # Combined bounds should be from (-1, -1) to (11, 1)
-    # But wait, Path.get_bounds_single() handles this more directly
     bounds = p.get_bounds_single()
     assert_equal(bounds, [[-1, -1], [11, 1]])
 
@@ -45,32 +39,21 @@ def test_path_custom_cap() -> None:
     p = Path(vertices=[[0, 0], [10, 0]], width=2, cap=Path.Cap.SquareCustom, cap_extensions=(5, 10))
     polys = p.to_polygons()
     assert len(polys) == 1
-    # Extends 5 units at start, 10 at end
-    # Starts at -5, ends at 20
     bounds = polys[0].get_bounds_single()
     assert_equal(bounds, [[-5, -1], [20, 1]])
 
 
 def test_path_bend() -> None:
-    # L-shaped path
     p = Path(vertices=[[0, 0], [10, 0], [10, 10]], width=2)
     polys = p.to_polygons()
     assert len(polys) == 1
     bounds = polys[0].get_bounds_single()
-    # Outer corner at (11, -1) is not right.
-    # Segments: (0,0)-(10,0) and (10,0)-(10,10)
-    # Corners of segment 1: (0,1), (10,1), (10,-1), (0,-1)
-    # Corners of segment 2: (9,0), (9,10), (11,10), (11,0)
-    # Bounds should be [[-1 (if start is square), -1], [11, 11]]?
-    # Flush cap start at (0,0) with width 2 means y from -1 to 1.
-    # Vertical segment end at (10,10) with width 2 means x from 9 to 11.
-    # So bounds should be x: [0, 11], y: [-1, 10]
     assert_equal(bounds, [[0, -1], [11, 10]])
 
 
 def test_path_mirror() -> None:
     p = Path(vertices=[[10, 5], [20, 10]], width=2)
-    p.mirror(0)  # Mirror across x axis (y -> -y)
+    p.mirror(0)
     assert_equal(p.vertices, [[10, -5], [20, -10]])
 
 
@@ -109,3 +92,10 @@ def test_path_normalized_form_distinguishes_custom_caps() -> None:
     p2 = Path(vertices=[[0, 0], [10, 0]], width=2, cap=Path.Cap.SquareCustom, cap_extensions=(3, 4))
 
     assert p1.normalized_form(1)[0] != p2.normalized_form(1)[0]
+
+
+def test_path_edge_cases() -> None:
+    p = MPath(vertices=[[0, 0], [0, 0], [10, 0]], width=2)
+    polys = p.to_polygons()
+    assert len(polys) == 1
+    assert_equal(polys[0].get_bounds_single(), [[0, -1], [10, 1]])

masque/test/test_pather.py

@@ -1,108 +0,0 @@
-import pytest
-from numpy.testing import assert_equal, assert_allclose
-from numpy import pi
-
-from ..builder import Pather
-from ..builder.tools import PathTool
-from ..library import Library
-from ..ports import Port
-
-
-@pytest.fixture
-def pather_setup() -> tuple[Pather, PathTool, Library]:
-    lib = Library()
-    # Simple PathTool: 2um width on layer (1,0)
-    tool = PathTool(layer=(1, 0), width=2, ptype="wire")
-    p = Pather(lib, tools=tool)
-    # Add an initial port facing North (pi/2)
-    # Port rotation points INTO device. So "North" rotation means device is North of port.
-    # Pathing "forward" moves South.
-    p.ports["start"] = Port((0, 0), pi / 2, ptype="wire")
-    return p, tool, lib
-
-
-def test_pather_straight(pather_setup: tuple[Pather, PathTool, Library]) -> None:
-    p, tool, lib = pather_setup
-    # Route 10um "forward"
-    p.straight("start", 10)
-
-    # port rot pi/2 (North). Travel +pi relative to port -> South.
-    assert_allclose(p.ports["start"].offset, [0, -10], atol=1e-10)
-    assert p.ports["start"].rotation is not None
-    assert_allclose(p.ports["start"].rotation, pi / 2, atol=1e-10)
-
-
-def test_pather_bend(pather_setup: tuple[Pather, PathTool, Library]) -> None:
-    p, tool, lib = pather_setup
-    # Start (0,0) rot pi/2 (North).
-    # Path 10um "forward" (South), then turn Clockwise (ccw=False).
-    # Facing South, turn Right -> West.
-    p.cw("start", 10)
-
-    # PathTool.planL(ccw=False, length=10) returns out_port at (10, -1) relative to (0,0) rot 0.
-    # Transformed by port rot pi/2 (North) + pi (to move "forward" away from device):
-    # Transformation rot = pi/2 + pi = 3pi/2.
-    # (10, -1) rotated 3pi/2: (x,y) -> (y, -x) -> (-1, -10).
-
-    assert_allclose(p.ports["start"].offset, [-1, -10], atol=1e-10)
-    # North (pi/2) + CW (90 deg) -> West (pi)?
-    # Actual behavior results in 0 (East) - apparently rotation is flipped.
-    assert p.ports["start"].rotation is not None
-    assert_allclose(p.ports["start"].rotation, 0, atol=1e-10)
-
-
-def test_pather_path_to(pather_setup: tuple[Pather, PathTool, Library]) -> None:
-    p, tool, lib = pather_setup
-    # start at (0,0) rot pi/2 (North)
-    # path "forward" (South) to y=-50
-    p.straight("start", y=-50)
-    assert_equal(p.ports["start"].offset, [0, -50])
-
-
-def test_pather_mpath(pather_setup: tuple[Pather, PathTool, Library]) -> None:
-    p, tool, lib = pather_setup
-    p.ports["A"] = Port((0, 0), pi / 2, ptype="wire")
-    p.ports["B"] = Port((10, 0), pi / 2, ptype="wire")
-
-    # Path both "forward" (South) to y=-20
-    p.straight(["A", "B"], ymin=-20)
-    assert_equal(p.ports["A"].offset, [0, -20])
-    assert_equal(p.ports["B"].offset, [10, -20])
-
-
-def test_pather_at_chaining(pather_setup: tuple[Pather, PathTool, Library]) -> None:
-    p, tool, lib = pather_setup
-    # Fluent API test
-    p.at("start").straight(10).ccw(10)
-    # 10um South -> (0, -10) rot pi/2
-    # then 10um South and turn CCW (Facing South, CCW is East)
-    # PathTool.planL(ccw=True, length=10) -> out_port=(10, 1) rot -pi/2 relative to rot 0
-    # Transform (10, 1) by 3pi/2: (x,y) -> (y, -x) -> (1, -10)
-    # (0, -10) + (1, -10) = (1, -20)
-    assert_allclose(p.ports["start"].offset, [1, -20], atol=1e-10)
-    # pi/2 (North) + CCW (90 deg) -> 0 (East)?
-    # Actual behavior results in pi (West).
-    assert p.ports["start"].rotation is not None
-    assert_allclose(p.ports["start"].rotation, pi, atol=1e-10)
-
-
-def test_pather_dead_ports() -> None:
-    lib = Library()
-    tool = PathTool(layer=(1, 0), width=1)
-    p = Pather(lib, ports={"in": Port((0, 0), 0)}, tools=tool)
-    p.set_dead()
-
-    # Path with negative length (impossible for PathTool, would normally raise BuildError)
-    p.straight("in", -10)
-
-    # Port 'in' should be updated by dummy extension despite tool failure
-    # port_rot=0, forward is -x. path(-10) means moving -10 in -x direction -> +10 in x.
-    assert_allclose(p.ports["in"].offset, [10, 0], atol=1e-10)
-
-    # Downstream path should work correctly using the dummy port location
-    p.straight("in", 20)
-    # 10 + (-20) = -10
-    assert_allclose(p.ports["in"].offset, [-10, 0], atol=1e-10)
-
-    # Verify no geometry
-    assert not p.pattern.has_shapes()

masque/test/test_pather_api.py

@@ -1,936 +0,0 @@
-from typing import Any
-
-import pytest
-import numpy
-from numpy import pi
-from masque import Pather, Library, Pattern, Port
-from masque.builder.tools import PathTool, Tool
-from masque.error import BuildError, PortError, PatternError
-
-def test_pather_trace_basic() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    p = Pather(lib, tools=tool, auto_render=False)
-
-    # Port rotation 0 points in +x (INTO device).
-    # To extend it, we move in -x direction.
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-
-    # Trace single port
-    p.at('A').trace(None, 5000)
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-5000, 0))
-
-    # Trace with bend
-    p.at('A').trace(True, 5000) # CCW bend
-    # Port was at (-5000, 0) rot 0.
-    # New wire starts at (-5000, 0) rot 0.
-    # Output port of wire before rotation: (5000, 500) rot -pi/2
-    # Rotate by pi (since dev port rot is 0 and tool port rot is 0):
-    # (-5000, -500) rot pi - pi/2 = pi/2
-    # Add to start: (-10000, -500) rot pi/2
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-10000, -500))
-    assert p.pattern.ports['A'].rotation is not None
-    assert numpy.isclose(p.pattern.ports['A'].rotation, pi/2)
-
-def test_pather_trace_to() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    p = Pather(lib, tools=tool, auto_render=False)
-
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-
-    # Trace to x=-10000
-    p.at('A').trace_to(None, x=-10000)
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-10000, 0))
-
-    # Trace to position=-20000
-    p.at('A').trace_to(None, p=-20000)
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-20000, 0))
-
-def test_pather_bundle_trace() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    p = Pather(lib, tools=tool, auto_render=False)
-
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-    p.pattern.ports['B'] = Port((0, 2000), rotation=0)
-
-    # Straight bundle - all should align to same x
-    p.at(['A', 'B']).straight(xmin=-10000)
-    assert numpy.isclose(p.pattern.ports['A'].offset[0], -10000)
-    assert numpy.isclose(p.pattern.ports['B'].offset[0], -10000)
-
-    # Bundle with bend
-    p.at(['A', 'B']).ccw(xmin=-20000, spacing=2000)
-    # Traveling in -x direction. CCW turn turns towards -y.
-    # A is at y=0, B is at y=2000.
-    # Rotation center is at y = -R.
-    # A is closer to center than B. So A is inner, B is outer.
-    # xmin is coordinate of innermost bend (A).
-    assert numpy.isclose(p.pattern.ports['A'].offset[0], -20000)
-    # B's bend is further out (more negative x)
-    assert numpy.isclose(p.pattern.ports['B'].offset[0], -22000)
-
-def test_pather_each_bound() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    p = Pather(lib, tools=tool, auto_render=False)
-
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-    p.pattern.ports['B'] = Port((-1000, 2000), rotation=0)
-
-    # Each should move by 5000 (towards -x)
-    p.at(['A', 'B']).trace(None, each=5000)
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-5000, 0))
-    assert numpy.allclose(p.pattern.ports['B'].offset, (-6000, 2000))
-
-def test_selection_management() -> None:
-    lib = Library()
-    p = Pather(lib)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-    p.pattern.ports['B'] = Port((0, 0), rotation=0)
-
-    pp = p.at('A')
-    assert pp.ports == ['A']
-
-    pp.select('B')
-    assert pp.ports == ['A', 'B']
-
-    pp.deselect('A')
-    assert pp.ports == ['B']
-
-    pp.select(['A'])
-    assert pp.ports == ['B', 'A']
-
-    pp.drop()
-    assert 'A' not in p.pattern.ports
-    assert 'B' not in p.pattern.ports
-    assert pp.ports == []
-
-def test_mark_fork() -> None:
-    lib = Library()
-    p = Pather(lib)
-    p.pattern.ports['A'] = Port((100, 200), rotation=1)
-
-    pp = p.at('A')
-    pp.mark('B')
-    assert 'B' in p.pattern.ports
-    assert numpy.allclose(p.pattern.ports['B'].offset, (100, 200))
-    assert p.pattern.ports['B'].rotation == 1
-    assert pp.ports == ['A'] # mark keeps current selection
-
-    pp.fork('C')
-    assert 'C' in p.pattern.ports
-    assert pp.ports == ['C'] # fork switches to new name
-
-
-def test_mark_fork_reject_overwrite_and_duplicate_targets() -> None:
-    lib = Library()
-
-    p_mark = Pather(lib, pattern=Pattern(ports={
-        'A': Port((0, 0), rotation=0),
-        'C': Port((2, 0), rotation=0),
-    }))
-    with pytest.raises(PortError, match='overwrite existing ports'):
-        p_mark.at('A').mark('C')
-    assert numpy.allclose(p_mark.pattern.ports['C'].offset, (2, 0))
-
-    p_fork = Pather(lib, pattern=Pattern(ports={
-        'A': Port((0, 0), rotation=0),
-        'B': Port((1, 0), rotation=0),
-    }))
-    pp = p_fork.at(['A', 'B'])
-    with pytest.raises(PortError, match='targets would collide'):
-        pp.fork({'A': 'X', 'B': 'X'})
-    assert set(p_fork.pattern.ports) == {'A', 'B'}
-    assert pp.ports == ['A', 'B']
-
-
-def test_mark_fork_dead_overwrite_and_duplicate_targets() -> None:
-    lib = Library()
-    p = Pather(lib, pattern=Pattern(ports={
-        'A': Port((0, 0), rotation=0),
-        'B': Port((1, 0), rotation=0),
-        'C': Port((2, 0), rotation=0),
-    }))
-    p.set_dead()
-
-    p.at('A').mark('C')
-    assert numpy.allclose(p.pattern.ports['C'].offset, (0, 0))
-
-    pp = p.at(['A', 'B'])
-    pp.fork({'A': 'X', 'B': 'X'})
-    assert numpy.allclose(p.pattern.ports['X'].offset, (1, 0))
-    assert pp.ports == ['X']
-
-
-def test_mark_fork_reject_missing_sources() -> None:
-    lib = Library()
-    p = Pather(lib, pattern=Pattern(ports={
-        'A': Port((0, 0), rotation=0),
-        'B': Port((1, 0), rotation=0),
-    }))
-
-    with pytest.raises(PortError, match='selected ports'):
-        p.at(['A', 'B']).mark({'Z': 'C'})
-
-    with pytest.raises(PortError, match='selected ports'):
-        p.at(['A', 'B']).fork({'Z': 'C'})
-
-def test_rename() -> None:
-    lib = Library()
-    p = Pather(lib)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-
-    p.at('A').rename('B')
-    assert 'A' not in p.pattern.ports
-    assert 'B' in p.pattern.ports
-
-    p.pattern.ports['C'] = Port((0, 0), rotation=0)
-    pp = p.at(['B', 'C'])
-    pp.rename({'B': 'D', 'C': 'E'})
-    assert 'B' not in p.pattern.ports
-    assert 'C' not in p.pattern.ports
-    assert 'D' in p.pattern.ports
-    assert 'E' in p.pattern.ports
-    assert set(pp.ports) == {'D', 'E'}
-
-def test_renderpather_uturn_fallback() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    rp = Pather(lib, tools=tool, auto_render=False)
-    rp.pattern.ports['A'] = Port((0, 0), rotation=0)
-
-    # PathTool doesn't implement planU, so it should fall back to two planL calls
-    rp.at('A').uturn(offset=10000, length=5000)
-
-    # Two steps should be added
-    assert len(rp.paths['A']) == 2
-    assert rp.paths['A'][0].opcode == 'L'
-    assert rp.paths['A'][1].opcode == 'L'
-
-    rp.render()
-    assert rp.pattern.ports['A'].rotation is not None
-    assert numpy.isclose(rp.pattern.ports['A'].rotation, pi)
-
-def test_autotool_uturn() -> None:
-    from masque.builder.tools import AutoTool
-    lib = Library()
-
-    # Setup AutoTool with a simple straight and a bend
-    def make_straight(length: float) -> Pattern:
-        pat = Pattern()
-        pat.rect(layer='M1', xmin=0, xmax=length, yctr=0, ly=1000)
-        pat.ports['in'] = Port((0, 0), 0)
-        pat.ports['out'] = Port((length, 0), pi)
-        return pat
-
-    bend_pat = Pattern()
-    bend_pat.polygon(layer='M1', vertices=[(0, -500), (0, 500), (1000, -500)])
-    bend_pat.ports['in'] = Port((0, 0), 0)
-    bend_pat.ports['out'] = Port((500, -500), pi/2)
-    lib['bend'] = bend_pat
-
-    tool = AutoTool(
-        straights=[AutoTool.Straight(ptype='wire', fn=make_straight, in_port_name='in', out_port_name='out')],
-        bends=[AutoTool.Bend(abstract=lib.abstract('bend'), in_port_name='in', out_port_name='out', clockwise=True)],
-        sbends=[],
-        transitions={},
-        default_out_ptype='wire'
-    )
-
-    p = Pather(lib, tools=tool, auto_render=False)
-    p.pattern.ports['A'] = Port((0, 0), 0)
-
-    # CW U-turn (jog < 0)
-    # R = 500. jog = -2000. length = 1000.
-    # p0 = planL(length=1000) -> out at (1000, -500) rot pi/2
-    # R2 = 500.
-    # l2_length = abs(-2000) - abs(-500) - 500 = 1000.
-    p.at('A').uturn(offset=-2000, length=1000)
-
-    # Final port should be at (-1000, 2000) rot pi
-    # Start: (0,0) rot 0. Wire direction is rot + pi = pi (West, -x).
-    # Tool planU returns (length, jog) = (1000, -2000) relative to (0,0) rot 0.
-    # Rotation of pi transforms (1000, -2000) to (-1000, 2000).
-    # Final rotation: 0 + pi = pi.
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-1000, 2000))
-    assert p.pattern.ports['A'].rotation is not None
-    assert numpy.isclose(p.pattern.ports['A'].rotation, pi)
-
-def test_pather_trace_into() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    p = Pather(lib, tools=tool, auto_render=False)
-
-    # 1. Straight connector
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-    p.pattern.ports['B'] = Port((-10000, 0), rotation=pi)
-    p.at('A').trace_into('B', plug_destination=False)
-    assert 'B' in p.pattern.ports
-    assert 'A' in p.pattern.ports
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-10000, 0))
-
-    # 2. Single bend
-    p.pattern.ports['C'] = Port((0, 0), rotation=0)
-    p.pattern.ports['D'] = Port((-5000, 5000), rotation=pi/2)
-    p.at('C').trace_into('D', plug_destination=False)
-    assert 'D' in p.pattern.ports
-    assert 'C' in p.pattern.ports
-    assert numpy.allclose(p.pattern.ports['C'].offset, (-5000, 5000))
-
-    # 3. Jog (S-bend)
-    p.pattern.ports['E'] = Port((0, 0), rotation=0)
-    p.pattern.ports['F'] = Port((-10000, 2000), rotation=pi)
-    p.at('E').trace_into('F', plug_destination=False)
-    assert 'F' in p.pattern.ports
-    assert 'E' in p.pattern.ports
-    assert numpy.allclose(p.pattern.ports['E'].offset, (-10000, 2000))
-
-    # 4. U-bend (0 deg angle)
-    p.pattern.ports['G'] = Port((0, 0), rotation=0)
-    p.pattern.ports['H'] = Port((-10000, 2000), rotation=0)
-    p.at('G').trace_into('H', plug_destination=False)
-    assert 'H' in p.pattern.ports
-    assert 'G' in p.pattern.ports
-    # A U-bend with length=-travel=10000 and jog=-2000 from (0,0) rot 0
-    # ends up at (-10000, 2000) rot pi.
-    assert numpy.allclose(p.pattern.ports['G'].offset, (-10000, 2000))
-    assert p.pattern.ports['G'].rotation is not None
-    assert numpy.isclose(p.pattern.ports['G'].rotation, pi)
-
-    # 5. Vertical straight connector
-    p.pattern.ports['I'] = Port((0, 0), rotation=pi / 2)
-    p.pattern.ports['J'] = Port((0, -10000), rotation=3 * pi / 2)
-    p.at('I').trace_into('J', plug_destination=False)
-    assert 'J' in p.pattern.ports
-    assert 'I' in p.pattern.ports
-    assert numpy.allclose(p.pattern.ports['I'].offset, (0, -10000))
-    assert p.pattern.ports['I'].rotation is not None
-    assert numpy.isclose(p.pattern.ports['I'].rotation, pi / 2)
-
-
-def test_pather_trace_into_dead_updates_ports_without_geometry() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000, ptype='wire')
-    p = Pather(lib, tools=tool, auto_render=False)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-    p.pattern.ports['B'] = Port((-10000, 0), rotation=pi, ptype='wire')
-    p.set_dead()
-
-    p.trace_into('A', 'B', plug_destination=False)
-
-    assert set(p.pattern.ports) == {'A', 'B'}
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-10000, 0))
-    assert p.pattern.ports['A'].rotation is not None
-    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
-    assert len(p.paths['A']) == 0
-    assert not p.pattern.has_shapes()
-    assert not p.pattern.has_refs()
-
-
-def test_pather_dead_fallback_preserves_out_ptype() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000, ptype='wire')
-    p = Pather(lib, tools=tool, auto_render=False)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-    p.set_dead()
-
-    p.straight('A', -1000, out_ptype='other')
-
-    assert numpy.allclose(p.pattern.ports['A'].offset, (1000, 0))
-    assert p.pattern.ports['A'].ptype == 'other'
-    assert len(p.paths['A']) == 0
-
-
-def test_pather_dead_place_overwrites_colliding_ports_last_wins() -> None:
-    lib = Library()
-    p = Pather(lib, pattern=Pattern(ports={
-        'A': Port((5, 5), rotation=0),
-        'keep': Port((9, 9), rotation=0),
-    }))
-    p.set_dead()
-
-    other = Pattern()
-    other.ports['X'] = Port((1, 0), rotation=0)
-    other.ports['Y'] = Port((2, 0), rotation=pi / 2)
-
-    p.place(other, port_map={'X': 'A', 'Y': 'A'})
-
-    assert set(p.pattern.ports) == {'A', 'keep'}
-    assert numpy.allclose(p.pattern.ports['A'].offset, (2, 0))
-    assert p.pattern.ports['A'].rotation is not None
-    assert numpy.isclose(p.pattern.ports['A'].rotation, pi / 2)
-
-
-def test_pather_dead_plug_overwrites_colliding_outputs_last_wins() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000, ptype='wire')
-    p = Pather(lib, tools=tool, pattern=Pattern(ports={
-        'A': Port((0, 0), rotation=0, ptype='wire'),
-        'B': Port((99, 99), rotation=0, ptype='wire'),
-    }))
-    p.set_dead()
-
-    other = Pattern()
-    other.ports['in'] = Port((0, 0), rotation=pi, ptype='wire')
-    other.ports['X'] = Port((10, 0), rotation=0, ptype='wire')
-    other.ports['Y'] = Port((20, 0), rotation=0, ptype='wire')
-
-    p.plug(other, map_in={'A': 'in'}, map_out={'X': 'B', 'Y': 'B'})
-
-    assert 'A' not in p.pattern.ports
-    assert 'B' in p.pattern.ports
-    assert numpy.allclose(p.pattern.ports['B'].offset, (20, 0))
-    assert p.pattern.ports['B'].rotation is not None
-    assert numpy.isclose(p.pattern.ports['B'].rotation, 0)
-
-
-def test_pather_dead_rename_overwrites_colliding_ports_last_wins() -> None:
-    p = Pather(Library(), pattern=Pattern(ports={
-        'A': Port((0, 0), rotation=0),
-        'B': Port((1, 0), rotation=0),
-        'C': Port((2, 0), rotation=0),
-    }))
-    p.set_dead()
-
-    p.rename_ports({'A': 'C', 'B': 'C'})
-
-    assert set(p.pattern.ports) == {'C'}
-    assert numpy.allclose(p.pattern.ports['C'].offset, (1, 0))
-
-
-def test_pather_jog_failed_fallback_is_atomic() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=2, ptype='wire')
-    p = Pather(lib, tools=tool)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    with pytest.raises(BuildError, match='shorter than required bend'):
-        p.jog('A', 1.5, length=1.5)
-
-    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
-    assert p.pattern.ports['A'].rotation == 0
-    assert len(p.paths['A']) == 0
-
-
-def test_pather_jog_accepts_sub_width_offset_when_length_is_sufficient() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=2, ptype='wire')
-    p = Pather(lib, tools=tool)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    p.jog('A', 1.5, length=5)
-
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-5, -1.5))
-    assert p.pattern.ports['A'].rotation == 0
-    assert len(p.paths['A']) == 0
-
-
-def test_pather_jog_length_solved_from_single_position_bound() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1, ptype='wire')
-    p = Pather(lib, tools=tool)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    p.jog('A', 2, x=-6)
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-6, -2))
-    assert p.pattern.ports['A'].rotation is not None
-    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
-
-    q = Pather(Library(), tools=tool)
-    q.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-    q.jog('A', 2, p=-6)
-    assert numpy.allclose(q.pattern.ports['A'].offset, (-6, -2))
-
-
-def test_pather_jog_requires_length_or_one_position_bound() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1, ptype='wire')
-    p = Pather(lib, tools=tool)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    with pytest.raises(BuildError, match='requires either length'):
-        p.jog('A', 2)
-
-    with pytest.raises(BuildError, match='exactly one positional bound'):
-        p.jog('A', 2, x=-6, p=-6)
-
-
-def test_pather_trace_to_rejects_conflicting_position_bounds() -> None:
-    tool = PathTool(layer='M1', width=1, ptype='wire')
-
-    for kwargs in ({'x': -5, 'y': 2}, {'y': 2, 'x': -5}, {'p': -7, 'x': -5}):
-        p = Pather(Library(), tools=tool)
-        p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-        with pytest.raises(BuildError, match='exactly one positional bound'):
-            p.trace_to('A', None, **kwargs)
-
-    p = Pather(Library(), tools=tool)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-    with pytest.raises(BuildError, match='length cannot be combined'):
-        p.trace_to('A', None, x=-5, length=3)
-
-
-def test_pather_trace_rejects_length_with_bundle_bound() -> None:
-    p = Pather(Library(), tools=PathTool(layer='M1', width=1, ptype='wire'))
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    with pytest.raises(BuildError, match='length cannot be combined'):
-        p.trace('A', None, length=5, xmin=-100)
-
-
-@pytest.mark.parametrize('kwargs', ({'xmin': -10, 'xmax': -20}, {'xmax': -20, 'xmin': -10}))
-def test_pather_trace_rejects_multiple_bundle_bounds(kwargs: dict[str, int]) -> None:
-    p = Pather(Library(), tools=PathTool(layer='M1', width=1, ptype='wire'))
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-    p.pattern.ports['B'] = Port((0, 5), rotation=0, ptype='wire')
-
-    with pytest.raises(BuildError, match='exactly one bundle bound'):
-        p.trace(['A', 'B'], None, **kwargs)
-
-
-def test_pather_jog_rejects_length_with_position_bound() -> None:
-    p = Pather(Library(), tools=PathTool(layer='M1', width=1, ptype='wire'))
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    with pytest.raises(BuildError, match='length cannot be combined'):
-        p.jog('A', 2, length=5, x=-999)
-
-
-@pytest.mark.parametrize('kwargs', ({'x': -999}, {'xmin': -10}))
-def test_pather_uturn_rejects_routing_bounds(kwargs: dict[str, int]) -> None:
-    p = Pather(Library(), tools=PathTool(layer='M1', width=1, ptype='wire'))
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    with pytest.raises(BuildError, match='Unsupported routing bounds for uturn'):
-        p.uturn('A', 4, **kwargs)
-
-
-def test_pather_uturn_none_length_defaults_to_zero() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1, ptype='wire')
-    p = Pather(lib, tools=tool)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    p.uturn('A', 4)
-
-    assert numpy.allclose(p.pattern.ports['A'].offset, (0, -4))
-    assert p.pattern.ports['A'].rotation is not None
-    assert numpy.isclose(p.pattern.ports['A'].rotation, pi)
-
-
-def test_pather_trace_into_failure_rolls_back_ports_and_paths() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1, ptype='wire')
-    p = Pather(lib, tools=tool)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-    p.pattern.ports['B'] = Port((-5, 5), rotation=pi / 2, ptype='wire')
-
-    with pytest.raises(BuildError, match='does not match path ptype'):
-        p.trace_into('A', 'B', plug_destination=False, out_ptype='other')
-
-    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
-    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
-    assert numpy.allclose(p.pattern.ports['B'].offset, (-5, 5))
-    assert numpy.isclose(p.pattern.ports['B'].rotation, pi / 2)
-    assert len(p.paths['A']) == 0
-
-
-def test_pather_trace_into_rename_failure_rolls_back_ports_and_paths() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1, ptype='wire')
-    p = Pather(lib, tools=tool)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-    p.pattern.ports['B'] = Port((-10, 0), rotation=pi, ptype='wire')
-    p.pattern.ports['other'] = Port((3, 4), rotation=0, ptype='wire')
-
-    with pytest.raises(PortError, match='overwritten'):
-        p.trace_into('A', 'B', plug_destination=False, thru='other')
-
-    assert set(p.pattern.ports) == {'A', 'B', 'other'}
-    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
-    assert numpy.allclose(p.pattern.ports['B'].offset, (-10, 0))
-    assert numpy.allclose(p.pattern.ports['other'].offset, (3, 4))
-    assert len(p.paths['A']) == 0
-
-
-@pytest.mark.parametrize(
-    ('dst', 'kwargs', 'match'),
-    (
-        (Port((-5, 5), rotation=pi / 2, ptype='wire'), {'x': -99}, r'trace_to\(\) arguments: x'),
-        (Port((-10, 2), rotation=pi, ptype='wire'), {'length': 1}, r'jog\(\) arguments: length'),
-        (Port((-10, 2), rotation=0, ptype='wire'), {'length': 1}, r'uturn\(\) arguments: length'),
-    ),
-)
-def test_pather_trace_into_rejects_reserved_route_kwargs(
-        dst: Port,
-        kwargs: dict[str, Any],
-        match: str,
-        ) -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1, ptype='wire')
-    p = Pather(lib, tools=tool)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-    p.pattern.ports['B'] = dst
-
-    with pytest.raises(BuildError, match=match):
-        p.trace_into('A', 'B', plug_destination=False, **kwargs)
-
-    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
-    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
-    assert numpy.allclose(p.pattern.ports['B'].offset, dst.offset)
-    assert dst.rotation is not None
-    assert p.pattern.ports['B'].rotation is not None
-    assert numpy.isclose(p.pattern.ports['B'].rotation, dst.rotation)
-    assert len(p.paths['A']) == 0
-
-
-def test_pather_two_l_fallback_validation_rejects_out_ptype_sensitive_jog() -> None:
-    class OutPtypeSensitiveTool(Tool):
-        def planL(self, ccw, length, *, in_ptype=None, out_ptype=None, **kwargs):
-            radius = 1 if out_ptype is None else 2
-            if ccw is None:
-                rotation = pi
-                jog = 0
-            elif bool(ccw):
-                rotation = -pi / 2
-                jog = radius
-            else:
-                rotation = pi / 2
-                jog = -radius
-            ptype = out_ptype or in_ptype or 'wire'
-            return Port((length, jog), rotation=rotation, ptype=ptype), {'ccw': ccw, 'length': length}
-
-    p = Pather(Library(), tools=OutPtypeSensitiveTool())
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    with pytest.raises(BuildError, match='fallback via two planL'):
-        p.jog('A', 5, length=10, out_ptype='wide')
-
-    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
-    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
-    assert len(p.paths['A']) == 0
-
-
-def test_pather_two_l_fallback_validation_rejects_out_ptype_sensitive_uturn() -> None:
-    class OutPtypeSensitiveTool(Tool):
-        def planL(self, ccw, length, *, in_ptype=None, out_ptype=None, **kwargs):
-            radius = 1 if out_ptype is None else 2
-            if ccw is None:
-                rotation = pi
-                jog = 0
-            elif bool(ccw):
-                rotation = -pi / 2
-                jog = radius
-            else:
-                rotation = pi / 2
-                jog = -radius
-            ptype = out_ptype or in_ptype or 'wire'
-            return Port((length, jog), rotation=rotation, ptype=ptype), {'ccw': ccw, 'length': length}
-
-    p = Pather(Library(), tools=OutPtypeSensitiveTool())
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    with pytest.raises(BuildError, match='fallback via two planL'):
-        p.uturn('A', 5, length=10, out_ptype='wide')
-
-    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
-    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
-    assert len(p.paths['A']) == 0
-
-
-def test_tool_planL_fallback_accepts_custom_port_names() -> None:
-    class DummyTool(Tool):
-        def traceL(self, ccw, length, *, in_ptype=None, out_ptype=None, port_names=('A', 'B'), **kwargs) -> Library:
-            lib = Library()
-            pat = Pattern()
-            pat.ports[port_names[0]] = Port((0, 0), 0, ptype='wire')
-            pat.ports[port_names[1]] = Port((length, 0), pi, ptype='wire')
-            lib['top'] = pat
-            return lib
-
-    out_port, _ = DummyTool().planL(None, 5, port_names=('X', 'Y'))
-    assert numpy.allclose(out_port.offset, (5, 0))
-    assert numpy.isclose(out_port.rotation, pi)
-
-
-def test_tool_planS_fallback_accepts_custom_port_names() -> None:
-    class DummyTool(Tool):
-        def traceS(self, length, jog, *, in_ptype=None, out_ptype=None, port_names=('A', 'B'), **kwargs) -> Library:
-            lib = Library()
-            pat = Pattern()
-            pat.ports[port_names[0]] = Port((0, 0), 0, ptype='wire')
-            pat.ports[port_names[1]] = Port((length, jog), pi, ptype='wire')
-            lib['top'] = pat
-            return lib
-
-    out_port, _ = DummyTool().planS(5, 2, port_names=('X', 'Y'))
-    assert numpy.allclose(out_port.offset, (5, 2))
-    assert numpy.isclose(out_port.rotation, pi)
-
-
-def test_pather_uturn_failed_fallback_is_atomic() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=2, ptype='wire')
-    p = Pather(lib, tools=tool)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    with pytest.raises(BuildError, match='shorter than required bend'):
-        p.uturn('A', 1.5, length=0)
-
-    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
-    assert p.pattern.ports['A'].rotation == 0
-    assert len(p.paths['A']) == 0
-
-
-def test_pather_render_auto_renames_single_use_tool_children() -> None:
-    class FullTreeTool(Tool):
-        def planL(self, ccw, length, *, in_ptype=None, out_ptype=None, **kwargs):    # noqa: ANN001,ANN202
-            ptype = out_ptype or in_ptype or 'wire'
-            return Port((length, 0), rotation=pi, ptype=ptype), {'length': length}
-
-        def render(self, batch, *, port_names=('A', 'B'), **kwargs) -> Library:      # noqa: ANN001,ANN202
-            tree = Library()
-            top = Pattern(ports={
-                port_names[0]: Port((0, 0), 0, ptype='wire'),
-                port_names[1]: Port((1, 0), pi, ptype='wire'),
-                })
-            child = Pattern(annotations={'batch': [len(batch)]})
-            top.ref('_seg')
-            tree['_top'] = top
-            tree['_seg'] = child
-            return tree
-
-    lib = Library()
-    p = Pather(lib, tools=FullTreeTool(), auto_render=False)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    p.straight('A', 10)
-    p.render()
-    p.straight('A', 10)
-    p.render()
-
-    assert len(lib) == 2
-    assert set(lib.keys()) == set(p.pattern.refs.keys())
-    assert len(set(p.pattern.refs.keys())) == 2
-    assert all(name.startswith('_seg') for name in lib)
-    assert p.pattern.referenced_patterns() <= set(lib.keys())
-
-
-def test_tool_render_fallback_preserves_segment_subtrees() -> None:
-    class TraceTreeTool(Tool):
-        def traceL(self, ccw, length, *, in_ptype=None, out_ptype=None, port_names=('A', 'B'), **kwargs) -> Library:   # noqa: ANN001
-            tree = Library()
-            top = Pattern(ports={
-                port_names[0]: Port((0, 0), 0, ptype='wire'),
-                port_names[1]: Port((length, 0), pi, ptype='wire'),
-                })
-            child = Pattern(annotations={'length': [length]})
-            top.ref('_seg')
-            tree['_top'] = top
-            tree['_seg'] = child
-            return tree
-
-    lib = Library()
-    p = Pather(lib, tools=TraceTreeTool(), auto_render=False)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    p.straight('A', 10)
-    p.render()
-
-    assert '_seg' in lib
-    assert '_seg' in p.pattern.refs
-    assert p.pattern.referenced_patterns() <= set(lib.keys())
-
-
-def test_pather_render_rejects_missing_single_use_tool_refs() -> None:
-    class MissingSingleUseTool(Tool):
-        def planL(self, ccw, length, *, in_ptype=None, out_ptype=None, **kwargs):    # noqa: ANN001,ANN202
-            ptype = out_ptype or in_ptype or 'wire'
-            return Port((length, 0), rotation=pi, ptype=ptype), {'length': length}
-
-        def render(self, batch, *, port_names=('A', 'B'), **kwargs) -> Library:      # noqa: ANN001,ANN202
-            tree = Library()
-            top = Pattern(ports={
-                port_names[0]: Port((0, 0), 0, ptype='wire'),
-                port_names[1]: Port((1, 0), pi, ptype='wire'),
-                })
-            top.ref('_seg')
-            tree['_top'] = top
-            return tree
-
-    lib = Library()
-    lib['_seg'] = Pattern(annotations={'stale': [1]})
-    p = Pather(lib, tools=MissingSingleUseTool(), auto_render=False)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-    p.straight('A', 10)
-
-    with pytest.raises(BuildError, match='missing single-use refs'):
-        p.render()
-
-    assert list(lib.keys()) == ['_seg']
-    assert not p.pattern.refs
-
-
-def test_pather_render_allows_missing_non_single_use_tool_refs() -> None:
-    class SharedRefTool(Tool):
-        def planL(self, ccw, length, *, in_ptype=None, out_ptype=None, **kwargs):    # noqa: ANN001,ANN202
-            ptype = out_ptype or in_ptype or 'wire'
-            return Port((length, 0), rotation=pi, ptype=ptype), {'length': length}
-
-        def render(self, batch, *, port_names=('A', 'B'), **kwargs) -> Library:      # noqa: ANN001,ANN202
-            tree = Library()
-            top = Pattern(ports={
-                port_names[0]: Port((0, 0), 0, ptype='wire'),
-                port_names[1]: Port((1, 0), pi, ptype='wire'),
-                })
-            top.ref('shared')
-            tree['_top'] = top
-            return tree
-
-    lib = Library()
-    lib['shared'] = Pattern(annotations={'shared': [1]})
-    p = Pather(lib, tools=SharedRefTool(), auto_render=False)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
-
-    p.straight('A', 10)
-    p.render()
-
-    assert 'shared' in p.pattern.refs
-    assert p.pattern.referenced_patterns() <= set(lib.keys())
-
-
-def test_renderpather_rename_to_none_keeps_pending_geometry_without_port() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    rp = Pather(lib, tools=tool, auto_render=False)
-    rp.pattern.ports['A'] = Port((0, 0), rotation=0)
-
-    rp.at('A').straight(5000)
-    rp.rename_ports({'A': None})
-
-    assert 'A' not in rp.pattern.ports
-    assert len(rp.paths['A']) == 1
-
-    rp.render()
-    assert rp.pattern.has_shapes()
-    assert 'A' not in rp.pattern.ports
-
-
-def test_pather_place_treeview_resolves_once() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    p = Pather(lib, tools=tool)
-
-    tree = {'child': Pattern(ports={'B': Port((1, 0), pi)})}
-
-    p.place(tree)
-
-    assert len(lib) == 1
-    assert 'child' in lib
-    assert 'child' in p.pattern.refs
-    assert 'B' in p.pattern.ports
-
-
-def test_pather_plug_treeview_resolves_once() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    p = Pather(lib, tools=tool)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-
-    tree = {'child': Pattern(ports={'B': Port((0, 0), pi)})}
-
-    p.plug(tree, {'A': 'B'})
-
-    assert len(lib) == 1
-    assert 'child' in lib
-    assert 'child' in p.pattern.refs
-    assert 'A' not in p.pattern.ports
-
-
-def test_pather_failed_plug_does_not_add_break_marker() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    p = Pather(lib, tools=tool, auto_render=False)
-    p.pattern.annotations = {'k': [1]}
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-
-    p.at('A').trace(None, 5000)
-    assert [step.opcode for step in p.paths['A']] == ['L']
-
-    other = Pattern(
-        annotations={'k': [2]},
-        ports={'X': Port((0, 0), pi), 'Y': Port((5, 0), 0)},
-        )
-
-    with pytest.raises(PatternError, match='Annotation keys overlap'):
-        p.plug(other, {'A': 'X'}, map_out={'Y': 'Z'}, append=True)
-
-    assert [step.opcode for step in p.paths['A']] == ['L']
-    assert set(p.pattern.ports) == {'A'}
-
-
-def test_pather_place_reused_deleted_name_keeps_break_marker() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    p = Pather(lib, tools=tool, auto_render=False)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-
-    p.at('A').straight(5000)
-    p.rename_ports({'A': None})
-
-    other = Pattern(ports={'X': Port((-5000, 0), rotation=0)})
-    p.place(other, port_map={'X': 'A'}, append=True)
-    p.at('A').straight(2000)
-
-    assert [step.opcode for step in p.paths['A']] == ['L', 'P', 'L']
-
-    p.render()
-    assert p.pattern.has_shapes()
-    assert 'A' in p.pattern.ports
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-7000, 0))
-
-
-def test_pather_plug_reused_deleted_name_keeps_break_marker() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    p = Pather(lib, tools=tool, auto_render=False)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-    p.pattern.ports['B'] = Port((0, 0), rotation=0)
-
-    p.at('A').straight(5000)
-    p.rename_ports({'A': None})
-
-    other = Pattern(
-        ports={
-            'X': Port((0, 0), rotation=pi),
-            'Y': Port((-5000, 0), rotation=0),
-            },
-        )
-    p.plug(other, {'B': 'X'}, map_out={'Y': 'A'}, append=True)
-    p.at('A').straight(2000)
-
-    assert [step.opcode for step in p.paths['A']] == ['L', 'P', 'L']
-
-    p.render()
-    assert p.pattern.has_shapes()
-    assert 'A' in p.pattern.ports
-    assert 'B' not in p.pattern.ports
-    assert numpy.allclose(p.pattern.ports['A'].offset, (-7000, 0))
-
-
-def test_pather_failed_plugged_does_not_add_break_marker() -> None:
-    lib = Library()
-    tool = PathTool(layer='M1', width=1000)
-    p = Pather(lib, tools=tool, auto_render=False)
-    p.pattern.ports['A'] = Port((0, 0), rotation=0)
-
-    p.at('A').straight(5000)
-    assert [step.opcode for step in p.paths['A']] == ['L']
-
-    with pytest.raises(PortError, match='Connection destination ports were not found'):
-        p.plugged({'A': 'missing'})
-
-    assert [step.opcode for step in p.paths['A']] == ['L']
-    assert set(p.paths) == {'A'}

masque/test/test_pather_autotool.py

@@ -0,0 +1,127 @@
+import pytest
+import numpy
+from numpy import pi
+from numpy.testing import assert_allclose
+
+from masque import Pather, Library, Pattern, Port
+from masque.builder.tools import AutoTool
+
+
+def make_straight(length, width=2, ptype="wire"):
+    pat = Pattern()
+    pat.rect((1, 0), xmin=0, xmax=length, yctr=0, ly=width)
+    pat.ports["A"] = Port((0, 0), 0, ptype=ptype)
+    pat.ports["B"] = Port((length, 0), pi, ptype=ptype)
+    return pat
+
+def make_bend(R, width=2, ptype="wire", clockwise=True):
+    pat = Pattern()
+    # Rectangular approximation of a 90 degree bend.
+    if clockwise:
+        pat.rect((1, 0), xmin=0, xmax=R, yctr=0, ly=width)
+        pat.rect((1, 0), xctr=R, lx=width, ymin=-R, ymax=0)
+        pat.ports["A"] = Port((0, 0), 0, ptype=ptype)
+        pat.ports["B"] = Port((R, -R), pi/2, ptype=ptype)
+    else:
+        pat.rect((1, 0), xmin=0, xmax=R, yctr=0, ly=width)
+        pat.rect((1, 0), xctr=R, lx=width, ymin=0, ymax=R)
+        pat.ports["A"] = Port((0, 0), 0, ptype=ptype)
+        pat.ports["B"] = Port((R, R), -pi/2, ptype=ptype)
+    return pat
+
+@pytest.fixture
+def multi_bend_tool():
+    lib = Library()
+
+    lib["b1"] = make_bend(2, ptype="wire")
+    b1_abs = lib.abstract("b1")
+    lib["b2"] = make_bend(5, ptype="wire")
+    b2_abs = lib.abstract("b2")
+
+    tool = AutoTool(
+        straights=[
+            AutoTool.Straight(ptype="wire", fn=make_straight, in_port_name="A", out_port_name="B", length_range=(0, 10)),
+            AutoTool.Straight(ptype="wire", fn=lambda l: make_straight(l, width=4), in_port_name="A", out_port_name="B", length_range=(10, 1e8))
+        ],
+        bends=[
+            AutoTool.Bend(b1_abs, "A", "B", clockwise=True, mirror=True),
+            AutoTool.Bend(b2_abs, "A", "B", clockwise=True, mirror=True)
+        ],
+        sbends=[],
+        transitions={},
+        default_out_ptype="wire"
+    )
+    return tool, lib
+
+def test_autotool_uturn() -> None:
+    from masque.builder.tools import AutoTool
+    lib = Library()
+
+    def make_straight(length: float) -> Pattern:
+        pat = Pattern()
+        pat.rect(layer='M1', xmin=0, xmax=length, yctr=0, ly=1000)
+        pat.ports['in'] = Port((0, 0), 0)
+        pat.ports['out'] = Port((length, 0), pi)
+        return pat
+
+    bend_pat = Pattern()
+    bend_pat.polygon(layer='M1', vertices=[(0, -500), (0, 500), (1000, -500)])
+    bend_pat.ports['in'] = Port((0, 0), 0)
+    bend_pat.ports['out'] = Port((500, -500), pi/2)
+    lib['bend'] = bend_pat
+
+    tool = AutoTool(
+        straights=[AutoTool.Straight(ptype='wire', fn=make_straight, in_port_name='in', out_port_name='out')],
+        bends=[AutoTool.Bend(abstract=lib.abstract('bend'), in_port_name='in', out_port_name='out', clockwise=True)],
+        sbends=[],
+        transitions={},
+        default_out_ptype='wire'
+    )
+
+    p = Pather(lib, tools=tool, auto_render=False)
+    p.pattern.ports['A'] = Port((0, 0), 0)
+
+    p.at('A').uturn(offset=-2000, length=1000)
+
+    # U-turn plan output is transformed into the port extension frame.
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-1000, 2000))
+    assert p.pattern.ports['A'].rotation is not None
+    assert numpy.isclose(p.pattern.ports['A'].rotation, pi)
+
+def test_deferred_render_autotool_double_L(multi_bend_tool) -> None:
+    tool, lib = multi_bend_tool
+    rp = Pather(lib, tools=tool, auto_render=False)
+    rp.ports["A"] = Port((0,0), 0, ptype="wire")
+
+    rp.jog("A", 10, length=20)
+
+    assert_allclose(rp.ports["A"].offset, [-20, -10])
+    assert_allclose(rp.ports["A"].rotation, 0)
+
+    rp.render()
+    assert len(rp.pattern.refs) > 0
+
+def test_pather_uturn_fallback_no_heuristic(multi_bend_tool) -> None:
+    tool, lib = multi_bend_tool
+
+    class BasicTool(AutoTool):
+        def planU(self, *args, **kwargs):
+            raise NotImplementedError()
+
+    tool_basic = BasicTool(
+        straights=tool.straights,
+        bends=tool.bends,
+        sbends=tool.sbends,
+        transitions=tool.transitions,
+        default_out_ptype=tool.default_out_ptype
+    )
+
+    p = Pather(lib, tools=tool_basic)
+    p.ports["A"] = Port((0,0), 0, ptype="wire")
+
+    p.uturn("A", 10, length=5)
+
+    # Fallback U-turn uses two CCW bends: (7, 2) then (8, 2) in local tool frames,
+    # yielding a global endpoint at (-5, -10).
+    assert_allclose(p.ports["A"].offset, [-5, -10])
+    assert_allclose(p.ports["A"].rotation, pi)

masque/test/test_pather_constraints.py

@@ -0,0 +1,213 @@
+from typing import Any
+
+import pytest
+import numpy
+from numpy import pi
+
+from masque import Pather, Library, Pattern, Port
+from masque.builder.tools import PathTool, Tool
+from masque.error import BuildError, PortError, PatternError
+
+
+def test_pather_jog_failed_fallback_is_atomic() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=2, ptype='wire')
+    p = Pather(lib, tools=tool)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    with pytest.raises(BuildError, match='shorter than required bend'):
+        p.jog('A', 1.5, length=1.5)
+
+    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
+    assert p.pattern.ports['A'].rotation == 0
+    assert len(p.paths['A']) == 0
+
+def test_pather_jog_accepts_sub_width_offset_when_length_is_sufficient() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=2, ptype='wire')
+    p = Pather(lib, tools=tool)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    p.jog('A', 1.5, length=5)
+
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-5, -1.5))
+    assert p.pattern.ports['A'].rotation == 0
+    assert len(p.paths['A']) == 0
+
+def test_pather_jog_length_solved_from_single_position_bound() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1, ptype='wire')
+    p = Pather(lib, tools=tool)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    p.jog('A', 2, x=-6)
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-6, -2))
+    assert p.pattern.ports['A'].rotation is not None
+    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
+
+    q = Pather(Library(), tools=tool)
+    q.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+    q.jog('A', 2, p=-6)
+    assert numpy.allclose(q.pattern.ports['A'].offset, (-6, -2))
+
+def test_pather_jog_requires_length_or_one_position_bound() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1, ptype='wire')
+    p = Pather(lib, tools=tool)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    with pytest.raises(BuildError, match='requires either length'):
+        p.jog('A', 2)
+
+    with pytest.raises(BuildError, match='exactly one positional bound'):
+        p.jog('A', 2, x=-6, p=-6)
+
+def test_pather_trace_to_rejects_conflicting_position_bounds() -> None:
+    tool = PathTool(layer='M1', width=1, ptype='wire')
+
+    for kwargs in ({'x': -5, 'y': 2}, {'y': 2, 'x': -5}, {'p': -7, 'x': -5}):
+        p = Pather(Library(), tools=tool)
+        p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+        with pytest.raises(BuildError, match='exactly one positional bound'):
+            p.trace_to('A', None, **kwargs)
+
+    p = Pather(Library(), tools=tool)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+    with pytest.raises(BuildError, match='length cannot be combined'):
+        p.trace_to('A', None, x=-5, length=3)
+
+def test_pather_trace_rejects_length_with_bundle_bound() -> None:
+    p = Pather(Library(), tools=PathTool(layer='M1', width=1, ptype='wire'))
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    with pytest.raises(BuildError, match='length cannot be combined'):
+        p.trace('A', None, length=5, xmin=-100)
+
+@pytest.mark.parametrize('kwargs', ({'xmin': -10, 'xmax': -20}, {'xmax': -20, 'xmin': -10}))
+def test_pather_trace_rejects_multiple_bundle_bounds(kwargs: dict[str, int]) -> None:
+    p = Pather(Library(), tools=PathTool(layer='M1', width=1, ptype='wire'))
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+    p.pattern.ports['B'] = Port((0, 5), rotation=0, ptype='wire')
+
+    with pytest.raises(BuildError, match='exactly one bundle bound'):
+        p.trace(['A', 'B'], None, **kwargs)
+
+def test_pather_jog_rejects_length_with_position_bound() -> None:
+    p = Pather(Library(), tools=PathTool(layer='M1', width=1, ptype='wire'))
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    with pytest.raises(BuildError, match='length cannot be combined'):
+        p.jog('A', 2, length=5, x=-999)
+
+@pytest.mark.parametrize('kwargs', ({'x': -999}, {'xmin': -10}))
+def test_pather_uturn_rejects_routing_bounds(kwargs: dict[str, int]) -> None:
+    p = Pather(Library(), tools=PathTool(layer='M1', width=1, ptype='wire'))
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    with pytest.raises(BuildError, match='Unsupported routing bounds for uturn'):
+        p.uturn('A', 4, **kwargs)
+
+def test_pather_uturn_none_length_defaults_to_zero() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1, ptype='wire')
+    p = Pather(lib, tools=tool)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    p.uturn('A', 4)
+
+    assert numpy.allclose(p.pattern.ports['A'].offset, (0, -4))
+    assert p.pattern.ports['A'].rotation is not None
+    assert numpy.isclose(p.pattern.ports['A'].rotation, pi)
+
+def test_pather_two_l_fallback_validation_rejects_out_ptype_sensitive_jog() -> None:
+    class OutPtypeSensitiveTool(Tool):
+        def planL(self, ccw, length, *, in_ptype=None, out_ptype=None, **kwargs):
+            radius = 1 if out_ptype is None else 2
+            if ccw is None:
+                rotation = pi
+                jog = 0
+            elif bool(ccw):
+                rotation = -pi / 2
+                jog = radius
+            else:
+                rotation = pi / 2
+                jog = -radius
+            ptype = out_ptype or in_ptype or 'wire'
+            return Port((length, jog), rotation=rotation, ptype=ptype), {'ccw': ccw, 'length': length}
+
+    p = Pather(Library(), tools=OutPtypeSensitiveTool())
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    with pytest.raises(BuildError, match='fallback via two planL'):
+        p.jog('A', 5, length=10, out_ptype='wide')
+
+    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
+    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
+    assert len(p.paths['A']) == 0
+
+def test_pather_two_l_fallback_validation_rejects_out_ptype_sensitive_uturn() -> None:
+    class OutPtypeSensitiveTool(Tool):
+        def planL(self, ccw, length, *, in_ptype=None, out_ptype=None, **kwargs):
+            radius = 1 if out_ptype is None else 2
+            if ccw is None:
+                rotation = pi
+                jog = 0
+            elif bool(ccw):
+                rotation = -pi / 2
+                jog = radius
+            else:
+                rotation = pi / 2
+                jog = -radius
+            ptype = out_ptype or in_ptype or 'wire'
+            return Port((length, jog), rotation=rotation, ptype=ptype), {'ccw': ccw, 'length': length}
+
+    p = Pather(Library(), tools=OutPtypeSensitiveTool())
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    with pytest.raises(BuildError, match='fallback via two planL'):
+        p.uturn('A', 5, length=10, out_ptype='wide')
+
+    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
+    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
+    assert len(p.paths['A']) == 0
+
+def test_tool_planL_fallback_accepts_custom_port_names() -> None:
+    class DummyTool(Tool):
+        def traceL(self, ccw, length, *, in_ptype=None, out_ptype=None, port_names=('A', 'B'), **kwargs) -> Library:
+            lib = Library()
+            pat = Pattern()
+            pat.ports[port_names[0]] = Port((0, 0), 0, ptype='wire')
+            pat.ports[port_names[1]] = Port((length, 0), pi, ptype='wire')
+            lib['top'] = pat
+            return lib
+
+    out_port, _ = DummyTool().planL(None, 5, port_names=('X', 'Y'))
+    assert numpy.allclose(out_port.offset, (5, 0))
+    assert numpy.isclose(out_port.rotation, pi)
+
+def test_tool_planS_fallback_accepts_custom_port_names() -> None:
+    class DummyTool(Tool):
+        def traceS(self, length, jog, *, in_ptype=None, out_ptype=None, port_names=('A', 'B'), **kwargs) -> Library:
+            lib = Library()
+            pat = Pattern()
+            pat.ports[port_names[0]] = Port((0, 0), 0, ptype='wire')
+            pat.ports[port_names[1]] = Port((length, jog), pi, ptype='wire')
+            lib['top'] = pat
+            return lib
+
+    out_port, _ = DummyTool().planS(5, 2, port_names=('X', 'Y'))
+    assert numpy.allclose(out_port.offset, (5, 2))
+    assert numpy.isclose(out_port.rotation, pi)
+
+def test_pather_uturn_failed_fallback_is_atomic() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=2, ptype='wire')
+    p = Pather(lib, tools=tool)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    with pytest.raises(BuildError, match='shorter than required bend'):
+        p.uturn('A', 1.5, length=0)
+
+    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
+    assert p.pattern.ports['A'].rotation == 0
+    assert len(p.paths['A']) == 0

masque/test/test_pather_core.py

@@ -0,0 +1,305 @@
+from typing import Any
+
+import pytest
+import numpy
+from numpy import pi
+from numpy.testing import assert_allclose, assert_equal
+
+from masque import Pather, Library, Pattern, Port
+from masque.builder.tools import PathTool, Tool
+from masque.error import BuildError, PortError, PatternError
+
+
+@pytest.fixture
+def pather_setup() -> tuple[Pather, PathTool, Library]:
+    lib = Library()
+    tool = PathTool(layer=(1, 0), width=2, ptype="wire")
+    p = Pather(lib, tools=tool)
+    # Port rotation points into the device, so path extension moves in the opposite direction.
+    p.ports["start"] = Port((0, 0), pi / 2, ptype="wire")
+    return p, tool, lib
+
+def test_pather_straight(pather_setup: tuple[Pather, PathTool, Library]) -> None:
+    p, tool, lib = pather_setup
+    p.straight("start", 10)
+
+    assert_allclose(p.ports["start"].offset, [0, -10], atol=1e-10)
+    assert p.ports["start"].rotation is not None
+    assert_allclose(p.ports["start"].rotation, pi / 2, atol=1e-10)
+
+def test_pather_bend(pather_setup: tuple[Pather, PathTool, Library]) -> None:
+    p, tool, lib = pather_setup
+    p.cw("start", 10)
+
+    assert_allclose(p.ports["start"].offset, [-1, -10], atol=1e-10)
+    assert p.ports["start"].rotation is not None
+    assert_allclose(p.ports["start"].rotation, 0, atol=1e-10)
+
+def test_pather_path_to(pather_setup: tuple[Pather, PathTool, Library]) -> None:
+    p, tool, lib = pather_setup
+    p.straight("start", y=-50)
+    assert_equal(p.ports["start"].offset, [0, -50])
+
+def test_pather_mpath(pather_setup: tuple[Pather, PathTool, Library]) -> None:
+    p, tool, lib = pather_setup
+    p.ports["A"] = Port((0, 0), pi / 2, ptype="wire")
+    p.ports["B"] = Port((10, 0), pi / 2, ptype="wire")
+
+    p.straight(["A", "B"], ymin=-20)
+    assert_equal(p.ports["A"].offset, [0, -20])
+    assert_equal(p.ports["B"].offset, [10, -20])
+
+def test_pather_at_chaining(pather_setup: tuple[Pather, PathTool, Library]) -> None:
+    p, tool, lib = pather_setup
+    p.at("start").straight(10).ccw(10)
+    assert_allclose(p.ports["start"].offset, [1, -20], atol=1e-10)
+    assert p.ports["start"].rotation is not None
+    assert_allclose(p.ports["start"].rotation, pi, atol=1e-10)
+
+def test_pather_dead_ports() -> None:
+    lib = Library()
+    tool = PathTool(layer=(1, 0), width=1)
+    p = Pather(lib, ports={"in": Port((0, 0), 0)}, tools=tool)
+    p.set_dead()
+
+    p.straight("in", -10)
+
+    assert_allclose(p.ports["in"].offset, [10, 0], atol=1e-10)
+
+    p.straight("in", 20)
+    assert_allclose(p.ports["in"].offset, [-10, 0], atol=1e-10)
+
+    assert not p.pattern.has_shapes()
+
+def test_pather_trace_basic() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    p = Pather(lib, tools=tool, auto_render=False)
+
+    # Routing extends opposite the port's inward-facing rotation.
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+
+    p.at('A').trace(None, 5000)
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-5000, 0))
+
+    p.at('A').trace(True, 5000) # CCW bend
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-10000, -500))
+    assert p.pattern.ports['A'].rotation is not None
+    assert numpy.isclose(p.pattern.ports['A'].rotation, pi/2)
+
+def test_pather_trace_to() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    p = Pather(lib, tools=tool, auto_render=False)
+
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+
+    p.at('A').trace_to(None, x=-10000)
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-10000, 0))
+
+    p.at('A').trace_to(None, p=-20000)
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-20000, 0))
+
+def test_pather_bundle_trace() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    p = Pather(lib, tools=tool, auto_render=False)
+
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+    p.pattern.ports['B'] = Port((0, 2000), rotation=0)
+
+    p.at(['A', 'B']).straight(xmin=-10000)
+    assert numpy.isclose(p.pattern.ports['A'].offset[0], -10000)
+    assert numpy.isclose(p.pattern.ports['B'].offset[0], -10000)
+
+    p.at(['A', 'B']).ccw(xmin=-20000, spacing=2000)
+    # The lower port is on the inner bend, so `xmin` applies to that route.
+    assert numpy.isclose(p.pattern.ports['A'].offset[0], -20000)
+    assert numpy.isclose(p.pattern.ports['B'].offset[0], -22000)
+
+def test_pather_each_bound() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    p = Pather(lib, tools=tool, auto_render=False)
+
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+    p.pattern.ports['B'] = Port((-1000, 2000), rotation=0)
+
+    p.at(['A', 'B']).trace(None, each=5000)
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-5000, 0))
+    assert numpy.allclose(p.pattern.ports['B'].offset, (-6000, 2000))
+
+def test_selection_management() -> None:
+    lib = Library()
+    p = Pather(lib)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+    p.pattern.ports['B'] = Port((0, 0), rotation=0)
+
+    pp = p.at('A')
+    assert pp.ports == ['A']
+
+    pp.select('B')
+    assert pp.ports == ['A', 'B']
+
+    pp.deselect('A')
+    assert pp.ports == ['B']
+
+    pp.select(['A'])
+    assert pp.ports == ['B', 'A']
+
+    pp.drop()
+    assert 'A' not in p.pattern.ports
+    assert 'B' not in p.pattern.ports
+    assert pp.ports == []
+
+def test_mark_fork() -> None:
+    lib = Library()
+    p = Pather(lib)
+    p.pattern.ports['A'] = Port((100, 200), rotation=1)
+
+    pp = p.at('A')
+    pp.mark('B')
+    assert 'B' in p.pattern.ports
+    assert numpy.allclose(p.pattern.ports['B'].offset, (100, 200))
+    assert p.pattern.ports['B'].rotation == 1
+    assert pp.ports == ['A']
+
+    pp.fork('C')
+    assert 'C' in p.pattern.ports
+    assert pp.ports == ['C']
+
+def test_mark_fork_reject_overwrite_and_duplicate_targets() -> None:
+    lib = Library()
+
+    p_mark = Pather(lib, pattern=Pattern(ports={
+        'A': Port((0, 0), rotation=0),
+        'C': Port((2, 0), rotation=0),
+    }))
+    with pytest.raises(PortError, match='overwrite existing ports'):
+        p_mark.at('A').mark('C')
+    assert numpy.allclose(p_mark.pattern.ports['C'].offset, (2, 0))
+
+    p_fork = Pather(lib, pattern=Pattern(ports={
+        'A': Port((0, 0), rotation=0),
+        'B': Port((1, 0), rotation=0),
+    }))
+    pp = p_fork.at(['A', 'B'])
+    with pytest.raises(PortError, match='targets would collide'):
+        pp.fork({'A': 'X', 'B': 'X'})
+    assert set(p_fork.pattern.ports) == {'A', 'B'}
+    assert pp.ports == ['A', 'B']
+
+def test_mark_fork_dead_overwrite_and_duplicate_targets() -> None:
+    lib = Library()
+    p = Pather(lib, pattern=Pattern(ports={
+        'A': Port((0, 0), rotation=0),
+        'B': Port((1, 0), rotation=0),
+        'C': Port((2, 0), rotation=0),
+    }))
+    p.set_dead()
+
+    p.at('A').mark('C')
+    assert numpy.allclose(p.pattern.ports['C'].offset, (0, 0))
+
+    pp = p.at(['A', 'B'])
+    pp.fork({'A': 'X', 'B': 'X'})
+    assert numpy.allclose(p.pattern.ports['X'].offset, (1, 0))
+    assert pp.ports == ['X']
+
+def test_mark_fork_reject_missing_sources() -> None:
+    lib = Library()
+    p = Pather(lib, pattern=Pattern(ports={
+        'A': Port((0, 0), rotation=0),
+        'B': Port((1, 0), rotation=0),
+    }))
+
+    with pytest.raises(PortError, match='selected ports'):
+        p.at(['A', 'B']).mark({'Z': 'C'})
+
+    with pytest.raises(PortError, match='selected ports'):
+        p.at(['A', 'B']).fork({'Z': 'C'})
+
+def test_rename() -> None:
+    lib = Library()
+    p = Pather(lib)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+
+    p.at('A').rename('B')
+    assert 'A' not in p.pattern.ports
+    assert 'B' in p.pattern.ports
+
+    p.pattern.ports['C'] = Port((0, 0), rotation=0)
+    pp = p.at(['B', 'C'])
+    pp.rename({'B': 'D', 'C': 'E'})
+    assert 'B' not in p.pattern.ports
+    assert 'C' not in p.pattern.ports
+    assert 'D' in p.pattern.ports
+    assert 'E' in p.pattern.ports
+    assert set(pp.ports) == {'D', 'E'}
+
+def test_pather_dead_fallback_preserves_out_ptype() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000, ptype='wire')
+    p = Pather(lib, tools=tool, auto_render=False)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+    p.set_dead()
+
+    p.straight('A', -1000, out_ptype='other')
+
+    assert numpy.allclose(p.pattern.ports['A'].offset, (1000, 0))
+    assert p.pattern.ports['A'].ptype == 'other'
+    assert len(p.paths['A']) == 0
+
+def test_pather_dead_place_overwrites_colliding_ports_last_wins() -> None:
+    lib = Library()
+    p = Pather(lib, pattern=Pattern(ports={
+        'A': Port((5, 5), rotation=0),
+        'keep': Port((9, 9), rotation=0),
+    }))
+    p.set_dead()
+
+    other = Pattern()
+    other.ports['X'] = Port((1, 0), rotation=0)
+    other.ports['Y'] = Port((2, 0), rotation=pi / 2)
+
+    p.place(other, port_map={'X': 'A', 'Y': 'A'})
+
+    assert set(p.pattern.ports) == {'A', 'keep'}
+    assert numpy.allclose(p.pattern.ports['A'].offset, (2, 0))
+    assert p.pattern.ports['A'].rotation is not None
+    assert numpy.isclose(p.pattern.ports['A'].rotation, pi / 2)
+
+def test_pather_dead_plug_overwrites_colliding_outputs_last_wins() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000, ptype='wire')
+    p = Pather(lib, tools=tool, pattern=Pattern(ports={
+        'A': Port((0, 0), rotation=0, ptype='wire'),
+        'B': Port((99, 99), rotation=0, ptype='wire'),
+    }))
+    p.set_dead()
+
+    other = Pattern()
+    other.ports['in'] = Port((0, 0), rotation=pi, ptype='wire')
+    other.ports['X'] = Port((10, 0), rotation=0, ptype='wire')
+    other.ports['Y'] = Port((20, 0), rotation=0, ptype='wire')
+
+    p.plug(other, map_in={'A': 'in'}, map_out={'X': 'B', 'Y': 'B'})
+
+    assert 'A' not in p.pattern.ports
+    assert 'B' in p.pattern.ports
+    assert numpy.allclose(p.pattern.ports['B'].offset, (20, 0))
+    assert p.pattern.ports['B'].rotation is not None
+    assert numpy.isclose(p.pattern.ports['B'].rotation, 0)
+
+def test_pather_dead_rename_overwrites_colliding_ports_last_wins() -> None:
+    p = Pather(Library(), pattern=Pattern(ports={
+        'A': Port((0, 0), rotation=0),
+        'B': Port((1, 0), rotation=0),
+        'C': Port((2, 0), rotation=0),
+    }))
+    p.set_dead()
+
+    p.rename_ports({'A': 'C', 'B': 'C'})
+
+    assert set(p.pattern.ports) == {'C'}
+    assert numpy.allclose(p.pattern.ports['C'].offset, (1, 0))

masque/test/test_pather_place_plug.py

@@ -0,0 +1,122 @@
+from typing import Any
+
+import pytest
+import numpy
+from numpy import pi
+
+from masque import Pather, Library, Pattern, Port
+from masque.builder.tools import PathTool, Tool
+from masque.error import BuildError, PortError, PatternError
+
+
+def test_pather_place_treeview_resolves_once() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    p = Pather(lib, tools=tool)
+
+    tree = {'child': Pattern(ports={'B': Port((1, 0), pi)})}
+
+    p.place(tree)
+
+    assert len(lib) == 1
+    assert 'child' in lib
+    assert 'child' in p.pattern.refs
+    assert 'B' in p.pattern.ports
+
+def test_pather_plug_treeview_resolves_once() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    p = Pather(lib, tools=tool)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+
+    tree = {'child': Pattern(ports={'B': Port((0, 0), pi)})}
+
+    p.plug(tree, {'A': 'B'})
+
+    assert len(lib) == 1
+    assert 'child' in lib
+    assert 'child' in p.pattern.refs
+    assert 'A' not in p.pattern.ports
+
+def test_pather_failed_plug_does_not_add_break_marker() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    p = Pather(lib, tools=tool, auto_render=False)
+    p.pattern.annotations = {'k': [1]}
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+
+    p.at('A').trace(None, 5000)
+    assert [step.opcode for step in p.paths['A']] == ['L']
+
+    other = Pattern(
+        annotations={'k': [2]},
+        ports={'X': Port((0, 0), pi), 'Y': Port((5, 0), 0)},
+        )
+
+    with pytest.raises(PatternError, match='Annotation keys overlap'):
+        p.plug(other, {'A': 'X'}, map_out={'Y': 'Z'}, append=True)
+
+    assert [step.opcode for step in p.paths['A']] == ['L']
+    assert set(p.pattern.ports) == {'A'}
+
+def test_pather_place_reused_deleted_name_keeps_break_marker() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    p = Pather(lib, tools=tool, auto_render=False)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+
+    p.at('A').straight(5000)
+    p.rename_ports({'A': None})
+
+    other = Pattern(ports={'X': Port((-5000, 0), rotation=0)})
+    p.place(other, port_map={'X': 'A'}, append=True)
+    p.at('A').straight(2000)
+
+    assert [step.opcode for step in p.paths['A']] == ['L', 'P', 'L']
+
+    p.render()
+    assert p.pattern.has_shapes()
+    assert 'A' in p.pattern.ports
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-7000, 0))
+
+def test_pather_plug_reused_deleted_name_keeps_break_marker() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    p = Pather(lib, tools=tool, auto_render=False)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+    p.pattern.ports['B'] = Port((0, 0), rotation=0)
+
+    p.at('A').straight(5000)
+    p.rename_ports({'A': None})
+
+    other = Pattern(
+        ports={
+            'X': Port((0, 0), rotation=pi),
+            'Y': Port((-5000, 0), rotation=0),
+            },
+        )
+    p.plug(other, {'B': 'X'}, map_out={'Y': 'A'}, append=True)
+    p.at('A').straight(2000)
+
+    assert [step.opcode for step in p.paths['A']] == ['L', 'P', 'L']
+
+    p.render()
+    assert p.pattern.has_shapes()
+    assert 'A' in p.pattern.ports
+    assert 'B' not in p.pattern.ports
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-7000, 0))
+
+def test_pather_failed_plugged_does_not_add_break_marker() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    p = Pather(lib, tools=tool, auto_render=False)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+
+    p.at('A').straight(5000)
+    assert [step.opcode for step in p.paths['A']] == ['L']
+
+    with pytest.raises(PortError, match='Connection destination ports were not found'):
+        p.plugged({'A': 'missing'})
+
+    assert [step.opcode for step in p.paths['A']] == ['L']
+    assert set(p.paths) == {'A'}

masque/test/test_pather_rendering.py

@@ -0,0 +1,312 @@
+from typing import TYPE_CHECKING, cast
+
+import pytest
+import numpy
+from numpy import pi
+from numpy.testing import assert_allclose
+
+from ..builder import Pather
+from ..builder.tools import PathTool, Tool
+from ..error import BuildError
+from ..library import Library
+from ..pattern import Pattern
+from ..ports import Port
+
+if TYPE_CHECKING:
+    from ..shapes import Path
+
+
+@pytest.fixture
+def deferred_render_setup() -> tuple[Pather, PathTool, Library]:
+    lib = Library()
+    tool = PathTool(layer=(1, 0), width=2, ptype="wire")
+    rp = Pather(lib, tools=tool, auto_render=False)
+    rp.ports["start"] = Port((0, 0), pi / 2, ptype="wire")
+    return rp, tool, lib
+
+def test_deferred_render_stores_pending_paths_until_render(deferred_render_setup: tuple[Pather, PathTool, Library]) -> None:
+    rp, tool, lib = deferred_render_setup
+    rp.at("start").straight(10).straight(10)
+
+    assert not rp.pattern.has_shapes()
+    assert len(rp.paths["start"]) == 2
+
+    rp.render()
+    assert rp.pattern.has_shapes()
+    assert len(rp.pattern.shapes[(1, 0)]) == 1
+
+    # PathTool renders length steps in the port extension direction.
+    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
+    assert len(path_shape.vertices) == 3
+    assert_allclose(path_shape.vertices, [[0, 0], [0, -10], [0, -20]], atol=1e-10)
+
+def test_deferred_render_bend(deferred_render_setup: tuple[Pather, PathTool, Library]) -> None:
+    rp, tool, lib = deferred_render_setup
+    rp.at("start").straight(10).cw(10)
+
+    rp.render()
+    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
+    # Clockwise bend adds the bend endpoint after the straight segment vertex.
+    assert len(path_shape.vertices) == 4
+    assert_allclose(path_shape.vertices, [[0, 0], [0, -10], [0, -20], [-1, -20]], atol=1e-10)
+
+def test_deferred_render_jog_uses_native_pathtool_planS(deferred_render_setup: tuple[Pather, PathTool, Library]) -> None:
+    rp, tool, lib = deferred_render_setup
+    rp.at("start").jog(4, length=10)
+
+    assert len(rp.paths["start"]) == 1
+    assert rp.paths["start"][0].opcode == "S"
+
+    rp.render()
+    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
+    # Native PathTool S-bends place the jog width/2 before the route end.
+    assert_allclose(path_shape.vertices, [[0, 0], [0, -9], [4, -9], [4, -10]], atol=1e-10)
+    assert_allclose(rp.ports["start"].offset, [4, -10], atol=1e-10)
+
+def test_deferred_render_mirror_preserves_planned_bend_geometry(deferred_render_setup: tuple[Pather, PathTool, Library]) -> None:
+    rp, tool, lib = deferred_render_setup
+    rp.at("start").straight(10).cw(10)
+
+    rp.mirror(0)
+    rp.render()
+
+    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
+    assert_allclose(path_shape.vertices, [[0, 0], [0, 10], [0, 20], [-1, 20]], atol=1e-10)
+
+def test_deferred_render_retool(deferred_render_setup: tuple[Pather, PathTool, Library]) -> None:
+    rp, tool1, lib = deferred_render_setup
+    tool2 = PathTool(layer=(2, 0), width=4, ptype="wire")
+
+    rp.at("start").straight(10)
+    rp.retool(tool2, keys=["start"])
+    rp.at("start").straight(10)
+
+    rp.render()
+    assert len(rp.pattern.shapes[(1, 0)]) == 1
+    assert len(rp.pattern.shapes[(2, 0)]) == 1
+
+def test_portpather_translate_only_affects_future_steps(deferred_render_setup: tuple[Pather, PathTool, Library]) -> None:
+    rp, tool, lib = deferred_render_setup
+    pp = rp.at("start")
+    pp.straight(10)
+    pp.translate((5, 0))
+    pp.straight(10)
+
+    rp.render()
+
+    shapes = rp.pattern.shapes[(1, 0)]
+    assert len(shapes) == 2
+    assert_allclose(cast("Path", shapes[0]).vertices, [[0, 0], [0, -10]], atol=1e-10)
+    assert_allclose(cast("Path", shapes[1]).vertices, [[5, -10], [5, -20]], atol=1e-10)
+    assert_allclose(rp.ports["start"].offset, [5, -20], atol=1e-10)
+
+def test_deferred_render_dead_ports() -> None:
+    lib = Library()
+    tool = PathTool(layer=(1, 0), width=1)
+    rp = Pather(lib, ports={"in": Port((0, 0), 0)}, tools=tool, auto_render=False)
+    rp.set_dead()
+
+    rp.straight("in", -10)
+
+    assert_allclose(rp.ports["in"].offset, [10, 0], atol=1e-10)
+
+    assert len(rp.paths["in"]) == 0
+
+    rp.render()
+    assert not rp.pattern.has_shapes()
+
+def test_deferred_render_rename_port(deferred_render_setup: tuple[Pather, PathTool, Library]) -> None:
+    rp, tool, lib = deferred_render_setup
+    rp.at("start").straight(10)
+    rp.rename_ports({"start": "new_start"})
+    rp.at("new_start").straight(10)
+
+    assert "start" not in rp.paths
+    assert len(rp.paths["new_start"]) == 2
+
+    rp.render()
+    assert rp.pattern.has_shapes()
+    assert len(rp.pattern.shapes[(1, 0)]) == 1
+    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
+    assert_allclose(path_shape.vertices, [[0, 0], [0, -10], [0, -20]], atol=1e-10)
+    assert "new_start" in rp.ports
+    assert_allclose(rp.ports["new_start"].offset, [0, -20], atol=1e-10)
+
+def test_deferred_render_drop_keeps_pending_geometry_without_port(deferred_render_setup: tuple[Pather, PathTool, Library]) -> None:
+    rp, tool, lib = deferred_render_setup
+    rp.at("start").straight(10).drop()
+
+    assert "start" not in rp.ports
+    assert len(rp.paths["start"]) == 1
+
+    rp.render()
+    assert rp.pattern.has_shapes()
+    assert "start" not in rp.ports
+    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
+    assert_allclose(path_shape.vertices, [[0, 0], [0, -10]], atol=1e-10)
+
+def test_pathtool_traceL_bend_geometry_matches_ports() -> None:
+    tool = PathTool(layer=(1, 0), width=2, ptype="wire")
+
+    tree = tool.traceL(True, 10)
+    pat = tree.top_pattern()
+    path_shape = cast("Path", pat.shapes[(1, 0)][0])
+
+    assert_allclose(path_shape.vertices, [[0, 0], [10, 0], [10, 1]], atol=1e-10)
+    assert_allclose(pat.ports["B"].offset, [10, 1], atol=1e-10)
+
+def test_pathtool_traceS_geometry_matches_ports() -> None:
+    tool = PathTool(layer=(1, 0), width=2, ptype="wire")
+
+    tree = tool.traceS(10, 4)
+    pat = tree.top_pattern()
+    path_shape = cast("Path", pat.shapes[(1, 0)][0])
+
+    assert_allclose(path_shape.vertices, [[0, 0], [9, 0], [9, 4], [10, 4]], atol=1e-10)
+    assert_allclose(pat.ports["B"].offset, [10, 4], atol=1e-10)
+    assert_allclose(pat.ports["B"].rotation, pi, atol=1e-10)
+
+def test_deferred_render_uturn_fallback() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    rp = Pather(lib, tools=tool, auto_render=False)
+    rp.pattern.ports['A'] = Port((0, 0), rotation=0)
+
+    rp.at('A').uturn(offset=10000, length=5000)
+
+    assert len(rp.paths['A']) == 2
+    assert rp.paths['A'][0].opcode == 'L'
+    assert rp.paths['A'][1].opcode == 'L'
+
+    rp.render()
+    assert rp.pattern.ports['A'].rotation is not None
+    assert numpy.isclose(rp.pattern.ports['A'].rotation, pi)
+
+def test_pather_render_auto_renames_single_use_tool_children() -> None:
+    class FullTreeTool(Tool):
+        def planL(self, ccw, length, *, in_ptype=None, out_ptype=None, **kwargs):    # noqa: ANN001,ANN202
+            ptype = out_ptype or in_ptype or 'wire'
+            return Port((length, 0), rotation=pi, ptype=ptype), {'length': length}
+
+        def render(self, batch, *, port_names=('A', 'B'), **kwargs) -> Library:      # noqa: ANN001,ANN202
+            tree = Library()
+            top = Pattern(ports={
+                port_names[0]: Port((0, 0), 0, ptype='wire'),
+                port_names[1]: Port((1, 0), pi, ptype='wire'),
+                })
+            child = Pattern(annotations={'batch': [len(batch)]})
+            top.ref('_seg')
+            tree['_top'] = top
+            tree['_seg'] = child
+            return tree
+
+    lib = Library()
+    p = Pather(lib, tools=FullTreeTool(), auto_render=False)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    p.straight('A', 10)
+    p.render()
+    p.straight('A', 10)
+    p.render()
+
+    assert len(lib) == 2
+    assert set(lib.keys()) == set(p.pattern.refs.keys())
+    assert len(set(p.pattern.refs.keys())) == 2
+    assert all(name.startswith('_seg') for name in lib)
+    assert p.pattern.referenced_patterns() <= set(lib.keys())
+
+def test_tool_render_fallback_preserves_segment_subtrees() -> None:
+    class TraceTreeTool(Tool):
+        def traceL(self, ccw, length, *, in_ptype=None, out_ptype=None, port_names=('A', 'B'), **kwargs) -> Library:   # noqa: ANN001
+            tree = Library()
+            top = Pattern(ports={
+                port_names[0]: Port((0, 0), 0, ptype='wire'),
+                port_names[1]: Port((length, 0), pi, ptype='wire'),
+                })
+            child = Pattern(annotations={'length': [length]})
+            top.ref('_seg')
+            tree['_top'] = top
+            tree['_seg'] = child
+            return tree
+
+    lib = Library()
+    p = Pather(lib, tools=TraceTreeTool(), auto_render=False)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    p.straight('A', 10)
+    p.render()
+
+    assert '_seg' in lib
+    assert '_seg' in p.pattern.refs
+    assert p.pattern.referenced_patterns() <= set(lib.keys())
+
+def test_pather_render_rejects_missing_single_use_tool_refs() -> None:
+    class MissingSingleUseTool(Tool):
+        def planL(self, ccw, length, *, in_ptype=None, out_ptype=None, **kwargs):    # noqa: ANN001,ANN202
+            ptype = out_ptype or in_ptype or 'wire'
+            return Port((length, 0), rotation=pi, ptype=ptype), {'length': length}
+
+        def render(self, batch, *, port_names=('A', 'B'), **kwargs) -> Library:      # noqa: ANN001,ANN202
+            tree = Library()
+            top = Pattern(ports={
+                port_names[0]: Port((0, 0), 0, ptype='wire'),
+                port_names[1]: Port((1, 0), pi, ptype='wire'),
+                })
+            top.ref('_seg')
+            tree['_top'] = top
+            return tree
+
+    lib = Library()
+    lib['_seg'] = Pattern(annotations={'stale': [1]})
+    p = Pather(lib, tools=MissingSingleUseTool(), auto_render=False)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+    p.straight('A', 10)
+
+    with pytest.raises(BuildError, match='missing single-use refs'):
+        p.render()
+
+    assert list(lib.keys()) == ['_seg']
+    assert not p.pattern.refs
+
+def test_pather_render_allows_missing_non_single_use_tool_refs() -> None:
+    class SharedRefTool(Tool):
+        def planL(self, ccw, length, *, in_ptype=None, out_ptype=None, **kwargs):    # noqa: ANN001,ANN202
+            ptype = out_ptype or in_ptype or 'wire'
+            return Port((length, 0), rotation=pi, ptype=ptype), {'length': length}
+
+        def render(self, batch, *, port_names=('A', 'B'), **kwargs) -> Library:      # noqa: ANN001,ANN202
+            tree = Library()
+            top = Pattern(ports={
+                port_names[0]: Port((0, 0), 0, ptype='wire'),
+                port_names[1]: Port((1, 0), pi, ptype='wire'),
+                })
+            top.ref('shared')
+            tree['_top'] = top
+            return tree
+
+    lib = Library()
+    lib['shared'] = Pattern(annotations={'shared': [1]})
+    p = Pather(lib, tools=SharedRefTool(), auto_render=False)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+
+    p.straight('A', 10)
+    p.render()
+
+    assert 'shared' in p.pattern.refs
+    assert p.pattern.referenced_patterns() <= set(lib.keys())
+
+def test_deferred_render_rename_to_none_keeps_pending_geometry_without_port() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    rp = Pather(lib, tools=tool, auto_render=False)
+    rp.pattern.ports['A'] = Port((0, 0), rotation=0)
+
+    rp.at('A').straight(5000)
+    rp.rename_ports({'A': None})
+
+    assert 'A' not in rp.pattern.ports
+    assert len(rp.paths['A']) == 1
+
+    rp.render()
+    assert rp.pattern.has_shapes()
+    assert 'A' not in rp.pattern.ports

masque/test/test_pather_trace_into.py

@@ -0,0 +1,189 @@
+from typing import Any
+
+import pytest
+import numpy
+from numpy import pi
+from numpy.testing import assert_equal
+
+from masque import Pather, Library, Pattern, Port
+from masque.builder.tools import PathTool, Tool
+from masque.error import BuildError, PortError, PatternError
+
+
+@pytest.fixture
+def trace_into_setup() -> tuple[Pather, PathTool, Library]:
+    lib = Library()
+    tool = PathTool(layer=(1, 0), width=2, ptype="wire")
+    p = Pather(lib, tools=tool, auto_render=True, auto_render_append=False)
+    return p, tool, lib
+
+def test_path_into_straight(trace_into_setup: tuple[Pather, PathTool, Library]) -> None:
+    p, _tool, _lib = trace_into_setup
+    p.ports["src"] = Port((0, 0), 0, ptype="wire")
+    p.ports["dst"] = Port((-20, 0), pi, ptype="wire")
+
+    p.trace_into("src", "dst")
+
+    assert "src" not in p.ports
+    assert "dst" not in p.ports
+    assert len(p.pattern.refs) == 1
+
+def test_path_into_bend(trace_into_setup: tuple[Pather, PathTool, Library]) -> None:
+    p, _tool, _lib = trace_into_setup
+    p.ports["src"] = Port((0, 0), 0, ptype="wire")
+    p.ports["dst"] = Port((-20, -20), 3 * pi / 2, ptype="wire")
+
+    p.trace_into("src", "dst")
+
+    assert "src" not in p.ports
+    assert "dst" not in p.ports
+    # `trace_into()` batches internal legs before auto-rendering so the operation
+    # rolls back cleanly on later failures.
+    assert len(p.pattern.refs) == 1
+
+def test_path_into_sbend(trace_into_setup: tuple[Pather, PathTool, Library]) -> None:
+    p, _tool, _lib = trace_into_setup
+    p.ports["src"] = Port((0, 0), 0, ptype="wire")
+    p.ports["dst"] = Port((-20, -10), pi, ptype="wire")
+
+    p.trace_into("src", "dst")
+
+    assert "src" not in p.ports
+    assert "dst" not in p.ports
+
+def test_path_into_thru(trace_into_setup: tuple[Pather, PathTool, Library]) -> None:
+    p, _tool, _lib = trace_into_setup
+    p.ports["src"] = Port((0, 0), 0, ptype="wire")
+    p.ports["dst"] = Port((-20, 0), pi, ptype="wire")
+    p.ports["other"] = Port((10, 10), 0)
+
+    p.trace_into("src", "dst", thru="other")
+
+    assert "src" in p.ports
+    assert_equal(p.ports["src"].offset, [10, 10])
+    assert "other" not in p.ports
+
+def test_pather_trace_into() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000)
+    p = Pather(lib, tools=tool, auto_render=False)
+
+    p.pattern.ports['A'] = Port((0, 0), rotation=0)
+    p.pattern.ports['B'] = Port((-10000, 0), rotation=pi)
+    p.at('A').trace_into('B', plug_destination=False)
+    assert 'B' in p.pattern.ports
+    assert 'A' in p.pattern.ports
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-10000, 0))
+
+    p.pattern.ports['C'] = Port((0, 0), rotation=0)
+    p.pattern.ports['D'] = Port((-5000, 5000), rotation=pi/2)
+    p.at('C').trace_into('D', plug_destination=False)
+    assert 'D' in p.pattern.ports
+    assert 'C' in p.pattern.ports
+    assert numpy.allclose(p.pattern.ports['C'].offset, (-5000, 5000))
+
+    p.pattern.ports['E'] = Port((0, 0), rotation=0)
+    p.pattern.ports['F'] = Port((-10000, 2000), rotation=pi)
+    p.at('E').trace_into('F', plug_destination=False)
+    assert 'F' in p.pattern.ports
+    assert 'E' in p.pattern.ports
+    assert numpy.allclose(p.pattern.ports['E'].offset, (-10000, 2000))
+
+    p.pattern.ports['G'] = Port((0, 0), rotation=0)
+    p.pattern.ports['H'] = Port((-10000, 2000), rotation=0)
+    p.at('G').trace_into('H', plug_destination=False)
+    assert 'H' in p.pattern.ports
+    assert 'G' in p.pattern.ports
+    assert numpy.allclose(p.pattern.ports['G'].offset, (-10000, 2000))
+    assert p.pattern.ports['G'].rotation is not None
+    assert numpy.isclose(p.pattern.ports['G'].rotation, pi)
+
+    p.pattern.ports['I'] = Port((0, 0), rotation=pi / 2)
+    p.pattern.ports['J'] = Port((0, -10000), rotation=3 * pi / 2)
+    p.at('I').trace_into('J', plug_destination=False)
+    assert 'J' in p.pattern.ports
+    assert 'I' in p.pattern.ports
+    assert numpy.allclose(p.pattern.ports['I'].offset, (0, -10000))
+    assert p.pattern.ports['I'].rotation is not None
+    assert numpy.isclose(p.pattern.ports['I'].rotation, pi / 2)
+
+def test_pather_trace_into_dead_updates_ports_without_geometry() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1000, ptype='wire')
+    p = Pather(lib, tools=tool, auto_render=False)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+    p.pattern.ports['B'] = Port((-10000, 0), rotation=pi, ptype='wire')
+    p.set_dead()
+
+    p.trace_into('A', 'B', plug_destination=False)
+
+    assert set(p.pattern.ports) == {'A', 'B'}
+    assert numpy.allclose(p.pattern.ports['A'].offset, (-10000, 0))
+    assert p.pattern.ports['A'].rotation is not None
+    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
+    assert len(p.paths['A']) == 0
+    assert not p.pattern.has_shapes()
+    assert not p.pattern.has_refs()
+
+def test_pather_trace_into_failure_rolls_back_ports_and_paths() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1, ptype='wire')
+    p = Pather(lib, tools=tool)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+    p.pattern.ports['B'] = Port((-5, 5), rotation=pi / 2, ptype='wire')
+
+    with pytest.raises(BuildError, match='does not match path ptype'):
+        p.trace_into('A', 'B', plug_destination=False, out_ptype='other')
+
+    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
+    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
+    assert numpy.allclose(p.pattern.ports['B'].offset, (-5, 5))
+    assert numpy.isclose(p.pattern.ports['B'].rotation, pi / 2)
+    assert len(p.paths['A']) == 0
+
+def test_pather_trace_into_rename_failure_rolls_back_ports_and_paths() -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1, ptype='wire')
+    p = Pather(lib, tools=tool)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+    p.pattern.ports['B'] = Port((-10, 0), rotation=pi, ptype='wire')
+    p.pattern.ports['other'] = Port((3, 4), rotation=0, ptype='wire')
+
+    with pytest.raises(PortError, match='overwritten'):
+        p.trace_into('A', 'B', plug_destination=False, thru='other')
+
+    assert set(p.pattern.ports) == {'A', 'B', 'other'}
+    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
+    assert numpy.allclose(p.pattern.ports['B'].offset, (-10, 0))
+    assert numpy.allclose(p.pattern.ports['other'].offset, (3, 4))
+    assert len(p.paths['A']) == 0
+
+@pytest.mark.parametrize(
+    ('dst', 'kwargs', 'match'),
+    (
+        (Port((-5, 5), rotation=pi / 2, ptype='wire'), {'x': -99}, r'trace_to\(\) arguments: x'),
+        (Port((-10, 2), rotation=pi, ptype='wire'), {'length': 1}, r'jog\(\) arguments: length'),
+        (Port((-10, 2), rotation=0, ptype='wire'), {'length': 1}, r'uturn\(\) arguments: length'),
+    ),
+)
+def test_pather_trace_into_rejects_reserved_route_kwargs(
+        dst: Port,
+        kwargs: dict[str, Any],
+        match: str,
+        ) -> None:
+    lib = Library()
+    tool = PathTool(layer='M1', width=1, ptype='wire')
+    p = Pather(lib, tools=tool)
+    p.pattern.ports['A'] = Port((0, 0), rotation=0, ptype='wire')
+    p.pattern.ports['B'] = dst
+
+    with pytest.raises(BuildError, match=match):
+        p.trace_into('A', 'B', plug_destination=False, **kwargs)
+
+    assert numpy.allclose(p.pattern.ports['A'].offset, (0, 0))
+    assert numpy.isclose(p.pattern.ports['A'].rotation, 0)
+    assert numpy.allclose(p.pattern.ports['B'].offset, dst.offset)
+    assert dst.rotation is not None
+    assert p.pattern.ports['B'].rotation is not None
+    assert numpy.isclose(p.pattern.ports['B'].rotation, dst.rotation)
+    assert len(p.paths['A']) == 0

masque/test/test_poly_collection.py

@@ -0,0 +1,89 @@
+import pytest
+from numpy.testing import assert_equal
+
+from ..error import PatternError
+from ..shapes import Circle, Ellipse, Polygon, PolyCollection
+
+
+def test_poly_collection_init() -> None:
+    verts = [[0, 0], [1, 0], [1, 1], [0, 1], [10, 10], [11, 10], [11, 11], [10, 11]]
+    offsets = [0, 4]
+    pc = PolyCollection(vertex_lists=verts, vertex_offsets=offsets)
+    assert len(list(pc.polygon_vertices)) == 2
+    assert_equal(pc.get_bounds_single(), [[0, 0], [11, 11]])
+
+def test_poly_collection_to_polygons() -> None:
+    verts = [[0, 0], [1, 0], [1, 1], [0, 1], [10, 10], [11, 10], [11, 11], [10, 11]]
+    offsets = [0, 4]
+    pc = PolyCollection(vertex_lists=verts, vertex_offsets=offsets)
+    polys = pc.to_polygons()
+    assert len(polys) == 2
+    assert_equal(polys[0].vertices, [[0, 0], [1, 0], [1, 1], [0, 1]])
+    assert_equal(polys[1].vertices, [[10, 10], [11, 10], [11, 11], [10, 11]])
+
+def test_poly_collection_holes() -> None:
+    # PolyCollection represents separate polygon boundaries, including nested boundaries.
+    verts = [
+        [0, 0],
+        [10, 0],
+        [10, 10],
+        [0, 10],  # Poly 1
+        [2, 2],
+        [2, 8],
+        [8, 8],
+        [8, 2],  # Poly 2
+    ]
+    offsets = [0, 4]
+    pc = PolyCollection(verts, offsets)
+    polys = pc.to_polygons()
+    assert len(polys) == 2
+    assert_equal(polys[0].vertices, [[0, 0], [10, 0], [10, 10], [0, 10]])
+    assert_equal(polys[1].vertices, [[2, 2], [2, 8], [8, 8], [8, 2]])
+
+def test_poly_collection_constituent_empty() -> None:
+    # Duplicate offsets create an empty constituent slice between valid polygons.
+    verts = [
+        [0, 0],
+        [1, 0],
+        [0, 1],  # Tri
+        [10, 10],
+        [11, 10],
+        [11, 11],
+        [10, 11],  # Square
+    ]
+    offsets = [0, 3, 3]
+    pc = PolyCollection(verts, offsets)
+    with pytest.raises(PatternError):
+        pc.to_polygons()
+
+def test_poly_collection_valid() -> None:
+    verts = [[0, 0], [1, 0], [0, 1], [10, 10], [11, 10], [11, 11], [10, 11]]
+    offsets = [0, 3]
+    pc = PolyCollection(verts, offsets)
+    assert len(pc.to_polygons()) == 2
+    shapes = [Circle(radius=20), Circle(radius=10), Polygon([[0, 0], [10, 0], [10, 10]]), Ellipse(radii=(5, 5))]
+    sorted_shapes = sorted(shapes)
+    assert len(sorted_shapes) == 4
+    assert sorted(sorted_shapes) == sorted_shapes
+
+def test_poly_collection_normalized_form_reconstruction_is_independent() -> None:
+    pc = PolyCollection([[0, 0], [1, 0], [0, 1]], [0])
+    _intrinsic, _extrinsic, rebuild = pc.normalized_form(1)
+
+    clone = rebuild()
+    clone.vertex_offsets[:] = [5]
+
+    assert_equal(pc.vertex_offsets, [0])
+    assert_equal(clone.vertex_offsets, [5])
+
+def test_poly_collection_normalized_form_rebuilds_independent_clones() -> None:
+    pc = PolyCollection([[0, 0], [1, 0], [0, 1]], [0])
+    _intrinsic, _extrinsic, rebuild = pc.normalized_form(1)
+
+    first = rebuild()
+    second = rebuild()
+    first.vertex_offsets[:] = [7]
+
+    assert_equal(first.vertex_offsets, [7])
+    assert_equal(second.vertex_offsets, [0])
+    assert_equal(pc.vertex_offsets, [0])

masque/test/test_renderpather.py

@@ -1,199 +0,0 @@
-import pytest
-from typing import cast, TYPE_CHECKING
-from numpy.testing import assert_allclose
-from numpy import pi
-
-from ..builder import Pather
-from ..builder.tools import PathTool
-from ..library import Library
-from ..ports import Port
-
-if TYPE_CHECKING:
-    from ..shapes import Path
-
-
-@pytest.fixture
-def rpather_setup() -> tuple[Pather, PathTool, Library]:
-    lib = Library()
-    tool = PathTool(layer=(1, 0), width=2, ptype="wire")
-    rp = Pather(lib, tools=tool, auto_render=False)
-    rp.ports["start"] = Port((0, 0), pi / 2, ptype="wire")
-    return rp, tool, lib
-
-
-def test_renderpather_basic(rpather_setup: tuple[Pather, PathTool, Library]) -> None:
-    rp, tool, lib = rpather_setup
-    # Plan two segments
-    rp.at("start").straight(10).straight(10)
-
-    # Before rendering, no shapes in pattern
-    assert not rp.pattern.has_shapes()
-    assert len(rp.paths["start"]) == 2
-
-    # Render
-    rp.render()
-    assert rp.pattern.has_shapes()
-    assert len(rp.pattern.shapes[(1, 0)]) == 1
-
-    # Path vertices should be (0,0), (0,-10), (0,-20)
-    # transformed by start port (rot pi/2 -> 270 deg transform)
-    # wait, PathTool.render for opcode L uses rotation_matrix_2d(port_rot + pi)
-    # start_port rot pi/2. pi/2 + pi = 3pi/2.
-    # (10, 0) rotated 3pi/2 -> (0, -10)
-    # So vertices: (0,0), (0,-10), (0,-20)
-    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
-    assert len(path_shape.vertices) == 3
-    assert_allclose(path_shape.vertices, [[0, 0], [0, -10], [0, -20]], atol=1e-10)
-
-
-def test_renderpather_bend(rpather_setup: tuple[Pather, PathTool, Library]) -> None:
-    rp, tool, lib = rpather_setup
-    # Plan straight then bend
-    rp.at("start").straight(10).cw(10)
-
-    rp.render()
-    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
-    # Path vertices:
-    # 1. Start (0,0)
-    # 2. Straight end: (0, -10)
-    # 3. Bend end: (-1, -20)
-    # PathTool.planL(ccw=False, length=10) returns data=[10, -1]
-    # start_port for 2nd segment is at (0, -10) with rotation pi/2
-    # dxy = rot(pi/2 + pi) @ (10, 0) = (0, -10). So vertex at (0, -20).
-    # and final end_port.offset is (-1, -20).
-    assert len(path_shape.vertices) == 4
-    assert_allclose(path_shape.vertices, [[0, 0], [0, -10], [0, -20], [-1, -20]], atol=1e-10)
-
-
-def test_renderpather_jog_uses_native_pathtool_planS(rpather_setup: tuple[Pather, PathTool, Library]) -> None:
-    rp, tool, lib = rpather_setup
-    rp.at("start").jog(4, length=10)
-
-    assert len(rp.paths["start"]) == 1
-    assert rp.paths["start"][0].opcode == "S"
-
-    rp.render()
-    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
-    # Native PathTool S-bends place the jog width/2 before the route end.
-    assert_allclose(path_shape.vertices, [[0, 0], [0, -9], [4, -9], [4, -10]], atol=1e-10)
-    assert_allclose(rp.ports["start"].offset, [4, -10], atol=1e-10)
-
-
-def test_renderpather_mirror_preserves_planned_bend_geometry(rpather_setup: tuple[Pather, PathTool, Library]) -> None:
-    rp, tool, lib = rpather_setup
-    rp.at("start").straight(10).cw(10)
-
-    rp.mirror(0)
-    rp.render()
-
-    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
-    assert_allclose(path_shape.vertices, [[0, 0], [0, 10], [0, 20], [-1, 20]], atol=1e-10)
-
-
-def test_renderpather_retool(rpather_setup: tuple[Pather, PathTool, Library]) -> None:
-    rp, tool1, lib = rpather_setup
-    tool2 = PathTool(layer=(2, 0), width=4, ptype="wire")
-
-    rp.at("start").straight(10)
-    rp.retool(tool2, keys=["start"])
-    rp.at("start").straight(10)
-
-    rp.render()
-    # Different tools should cause different batches/shapes
-    assert len(rp.pattern.shapes[(1, 0)]) == 1
-    assert len(rp.pattern.shapes[(2, 0)]) == 1
-
-
-def test_portpather_translate_only_affects_future_steps(rpather_setup: tuple[Pather, PathTool, Library]) -> None:
-    rp, tool, lib = rpather_setup
-    pp = rp.at("start")
-    pp.straight(10)
-    pp.translate((5, 0))
-    pp.straight(10)
-
-    rp.render()
-
-    shapes = rp.pattern.shapes[(1, 0)]
-    assert len(shapes) == 2
-    assert_allclose(cast("Path", shapes[0]).vertices, [[0, 0], [0, -10]], atol=1e-10)
-    assert_allclose(cast("Path", shapes[1]).vertices, [[5, -10], [5, -20]], atol=1e-10)
-    assert_allclose(rp.ports["start"].offset, [5, -20], atol=1e-10)
-
-
-def test_renderpather_dead_ports() -> None:
-    lib = Library()
-    tool = PathTool(layer=(1, 0), width=1)
-    rp = Pather(lib, ports={"in": Port((0, 0), 0)}, tools=tool, auto_render=False)
-    rp.set_dead()
-
-    # Impossible path
-    rp.straight("in", -10)
-
-    # port_rot=0, forward is -x. path(-10) means moving -10 in -x direction -> +10 in x.
-    assert_allclose(rp.ports["in"].offset, [10, 0], atol=1e-10)
-
-    # Verify no render steps were added
-    assert len(rp.paths["in"]) == 0
-
-    # Verify no geometry
-    rp.render()
-    assert not rp.pattern.has_shapes()
-
-
-def test_renderpather_rename_port(rpather_setup: tuple[Pather, PathTool, Library]) -> None:
-    rp, tool, lib = rpather_setup
-    rp.at("start").straight(10)
-    # Rename port while path is planned
-    rp.rename_ports({"start": "new_start"})
-    # Continue path on new name
-    rp.at("new_start").straight(10)
-
-    assert "start" not in rp.paths
-    assert len(rp.paths["new_start"]) == 2
-
-    rp.render()
-    assert rp.pattern.has_shapes()
-    assert len(rp.pattern.shapes[(1, 0)]) == 1
-    # Total length 20. start_port rot pi/2 -> 270 deg transform.
-    # Vertices (0,0), (0,-10), (0,-20)
-    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
-    assert_allclose(path_shape.vertices, [[0, 0], [0, -10], [0, -20]], atol=1e-10)
-    assert "new_start" in rp.ports
-    assert_allclose(rp.ports["new_start"].offset, [0, -20], atol=1e-10)
-
-
-def test_renderpather_drop_keeps_pending_geometry_without_port(rpather_setup: tuple[Pather, PathTool, Library]) -> None:
-    rp, tool, lib = rpather_setup
-    rp.at("start").straight(10).drop()
-
-    assert "start" not in rp.ports
-    assert len(rp.paths["start"]) == 1
-
-    rp.render()
-    assert rp.pattern.has_shapes()
-    assert "start" not in rp.ports
-    path_shape = cast("Path", rp.pattern.shapes[(1, 0)][0])
-    assert_allclose(path_shape.vertices, [[0, 0], [0, -10]], atol=1e-10)
-
-
-def test_pathtool_traceL_bend_geometry_matches_ports() -> None:
-    tool = PathTool(layer=(1, 0), width=2, ptype="wire")
-
-    tree = tool.traceL(True, 10)
-    pat = tree.top_pattern()
-    path_shape = cast("Path", pat.shapes[(1, 0)][0])
-
-    assert_allclose(path_shape.vertices, [[0, 0], [10, 0], [10, 1]], atol=1e-10)
-    assert_allclose(pat.ports["B"].offset, [10, 1], atol=1e-10)
-
-
-def test_pathtool_traceS_geometry_matches_ports() -> None:
-    tool = PathTool(layer=(1, 0), width=2, ptype="wire")
-
-    tree = tool.traceS(10, 4)
-    pat = tree.top_pattern()
-    path_shape = cast("Path", pat.shapes[(1, 0)][0])
-
-    assert_allclose(path_shape.vertices, [[0, 0], [9, 0], [9, 4], [10, 4]], atol=1e-10)
-    assert_allclose(pat.ports["B"].offset, [10, 4], atol=1e-10)
-    assert_allclose(pat.ports["B"].rotation, pi, atol=1e-10)

masque/test/test_repetition.py

@@ -7,7 +7,6 @@ from ..error import PatternError
 
 
 def test_grid_displacements() -> None:
-    # 2x2 grid
     grid = Grid(a_vector=(10, 0), b_vector=(0, 5), a_count=2, b_count=2)
     disps = sorted([tuple(d) for d in grid.displacements])
     assert disps == [(0.0, 0.0), (0.0, 5.0), (10.0, 0.0), (10.0, 5.0)]
@@ -34,7 +33,6 @@ def test_grid_get_bounds() -> None:
 def test_arbitrary_displacements() -> None:
     pts = [[0, 0], [10, 20], [-5, 30]]
     arb = Arbitrary(pts)
-    # They should be sorted by displacements.setter
     disps = arb.displacements
     assert len(disps) == 3
     assert any((disps == [0, 0]).all(axis=1))
@@ -47,9 +45,7 @@ def test_arbitrary_transform() -> None:
     arb.rotate(pi / 2)
     assert_allclose(arb.displacements, [[0, 10]], atol=1e-10)
 
-    arb.mirror(0)  # Mirror x across y axis? Wait, mirror(axis=0) in repetition.py is:
+    arb.mirror(0)
-    # self.displacements[:, 1 - axis] *= -1
-    # if axis=0, 1-axis=1, so y *= -1
     assert_allclose(arb.displacements, [[0, -10]], atol=1e-10)
 
 

masque/test/test_shape_advanced.py

@@ -1,244 +0,0 @@
-from pathlib import Path
-import pytest
-import numpy
-from numpy.testing import assert_equal, assert_allclose
-from numpy import pi
-
-from ..shapes import Arc, Ellipse, Circle, Polygon, Path as MPath, Text, PolyCollection
-from ..error import PatternError
-
-
-# 1. Text shape tests
-def test_text_to_polygons() -> None:
-    pytest.importorskip("freetype")
-    font_path = "/usr/share/fonts/truetype/dejavu/DejaVuMathTeXGyre.ttf"
-    if not Path(font_path).exists():
-        pytest.skip("Font file not found")
-
-    t = Text("Hi", height=10, font_path=font_path)
-    polys = t.to_polygons()
-    assert len(polys) > 0
-    assert all(isinstance(p, Polygon) for p in polys)
-
-    # Check that it advances
-    # Character 'H' and 'i' should have different vertices
-    # Each character is a set of polygons. We check the mean x of vertices for each character.
-    char_x_means = [p.vertices[:, 0].mean() for p in polys]
-    assert len(set(char_x_means)) >= 2
-
-
-def test_text_bounds_and_normalized_form() -> None:
-    pytest.importorskip("freetype")
-    font_path = "/usr/share/fonts/truetype/dejavu/DejaVuMathTeXGyre.ttf"
-    if not Path(font_path).exists():
-        pytest.skip("Font file not found")
-
-    text = Text("Hi", height=10, font_path=font_path)
-    _intrinsic, extrinsic, ctor = text.normalized_form(5)
-    normalized = ctor()
-
-    assert extrinsic[1] == 2
-    assert normalized.height == 5
-
-    bounds = text.get_bounds_single()
-    assert bounds is not None
-    assert numpy.isfinite(bounds).all()
-    assert numpy.all(bounds[1] > bounds[0])
-
-
-def test_text_mirroring_affects_comparison() -> None:
-    text = Text("A", height=10, font_path="dummy.ttf")
-    mirrored = Text("A", height=10, font_path="dummy.ttf", mirrored=True)
-
-    assert text != mirrored
-    assert (text < mirrored) != (mirrored < text)
-
-
-# 2. Manhattanization tests
-def test_manhattanize() -> None:
-    pytest.importorskip("float_raster")
-    pytest.importorskip("skimage.measure")
-    # Diamond shape
-    poly = Polygon([[0, 5], [5, 10], [10, 5], [5, 0]])
-    grid = numpy.arange(0, 11, 1)
-
-    manhattan_polys = poly.manhattanize(grid, grid)
-    assert len(manhattan_polys) >= 1
-    for mp in manhattan_polys:
-        # Check that all edges are axis-aligned
-        dv = numpy.diff(mp.vertices, axis=0)
-        # For each segment, either dx or dy must be zero
-        assert numpy.all((dv[:, 0] == 0) | (dv[:, 1] == 0))
-
-
-# 3. Comparison and Sorting tests
-def test_shape_comparisons() -> None:
-    c1 = Circle(radius=10)
-    c2 = Circle(radius=20)
-    assert c1 < c2
-    assert not (c2 < c1)
-
-    p1 = Polygon([[0, 0], [10, 0], [10, 10]])
-    p2 = Polygon([[0, 0], [10, 0], [10, 11]])  # Different vertex
-    assert p1 < p2
-
-    # Different types
-    assert c1 < p1 or p1 < c1
-    assert (c1 < p1) != (p1 < c1)
-
-
-# 4. Arc/Path Edge Cases
-def test_arc_edge_cases() -> None:
-    # Wrapped arc (> 360 deg)
-    a = Arc(radii=(10, 10), angles=(0, 3 * pi), width=2)
-    a.to_polygons(num_vertices=64)
-    # Should basically be a ring
-    bounds = a.get_bounds_single()
-    assert_allclose(bounds, [[-11, -11], [11, 11]], atol=1e-10)
-
-
-def test_rotated_ellipse_bounds_match_polygonized_geometry() -> None:
-    ellipse = Ellipse(radii=(10, 20), rotation=pi / 4, offset=(100, 200))
-    bounds = ellipse.get_bounds_single()
-    poly_bounds = ellipse.to_polygons(num_vertices=8192)[0].get_bounds_single()
-    assert_allclose(bounds, poly_bounds, atol=1e-3)
-
-
-def test_rotated_arc_bounds_match_polygonized_geometry() -> None:
-    arc = Arc(radii=(10, 20), angles=(0, pi), width=2, rotation=pi / 4, offset=(100, 200))
-    bounds = arc.get_bounds_single()
-    poly_bounds = arc.to_polygons(num_vertices=8192)[0].get_bounds_single()
-    assert_allclose(bounds, poly_bounds, atol=1e-3)
-
-
-def test_curve_polygonizers_clamp_large_max_arclen() -> None:
-    for shape in (
-            Circle(radius=10),
-            Ellipse(radii=(10, 20)),
-            Arc(radii=(10, 20), angles=(0, 1), width=2),
-            ):
-        polys = shape.to_polygons(num_vertices=None, max_arclen=1e9)
-        assert len(polys) == 1
-        assert len(polys[0].vertices) >= 3
-
-
-def test_arc_polygonization_rejects_nan_implied_arclen() -> None:
-    arc = Arc(radii=(10, 20), angles=(0, numpy.nan), width=2)
-    with pytest.raises(PatternError, match='valid max_arclen'):
-        arc.to_polygons(num_vertices=24)
-
-
-def test_ellipse_integer_radii_scale_cleanly() -> None:
-    ellipse = Ellipse(radii=(10, 20))
-    ellipse.scale_by(0.5)
-    assert_allclose(ellipse.radii, [5, 10])
-
-
-def test_arc_rejects_zero_radii_up_front() -> None:
-    with pytest.raises(PatternError, match='Radii must be positive'):
-        Arc(radii=(0, 5), angles=(0, 1), width=1)
-    with pytest.raises(PatternError, match='Radii must be positive'):
-        Arc(radii=(5, 0), angles=(0, 1), width=1)
-    with pytest.raises(PatternError, match='Radii must be positive'):
-        Arc(radii=(0, 0), angles=(0, 1), width=1)
-
-
-def test_path_edge_cases() -> None:
-    # Zero-length segments
-    p = MPath(vertices=[[0, 0], [0, 0], [10, 0]], width=2)
-    polys = p.to_polygons()
-    assert len(polys) == 1
-    assert_equal(polys[0].get_bounds_single(), [[0, -1], [10, 1]])
-
-
-# 5. PolyCollection with holes
-def test_poly_collection_holes() -> None:
-    # Outer square, inner square hole
-    # PolyCollection doesn't explicitly support holes, but its constituents (Polygons) do?
-    # wait, Polygon in masque is just a boundary. Holes are usually handled by having multiple
-    # polygons or using specific winding rules.
-    # masque.shapes.Polygon doc says "specify an implicitly-closed boundary".
-    # Pyclipper is used in connectivity.py for holes.
-
-    # Let's test PolyCollection with multiple polygons
-    verts = [
-        [0, 0],
-        [10, 0],
-        [10, 10],
-        [0, 10],  # Poly 1
-        [2, 2],
-        [2, 8],
-        [8, 8],
-        [8, 2],  # Poly 2
-    ]
-    offsets = [0, 4]
-    pc = PolyCollection(verts, offsets)
-    polys = pc.to_polygons()
-    assert len(polys) == 2
-    assert_equal(polys[0].vertices, [[0, 0], [10, 0], [10, 10], [0, 10]])
-    assert_equal(polys[1].vertices, [[2, 2], [2, 8], [8, 8], [8, 2]])
-
-
-def test_poly_collection_constituent_empty() -> None:
-    # One real triangle, one "empty" polygon (0 vertices), one real square
-    # Note: Polygon requires 3 vertices, so "empty" here might mean just some junk
-    # that to_polygons should handle.
-    # Actually PolyCollection doesn't check vertex count per polygon.
-    verts = [
-        [0, 0],
-        [1, 0],
-        [0, 1],  # Tri
-        # Empty space
-        [10, 10],
-        [11, 10],
-        [11, 11],
-        [10, 11],  # Square
-    ]
-    offsets = [0, 3, 3]  # Index 3 is start of "empty", Index 3 is also start of Square?
-    # No, offsets should be strictly increasing or handle 0-length slices.
-    # vertex_slices uses zip(offsets, chain(offsets[1:], [len(verts)]))
-    # if offsets = [0, 3, 3], slices are [0:3], [3:3], [3:7]
-    offsets = [0, 3, 3]
-    pc = PolyCollection(verts, offsets)
-    # Polygon(vertices=[]) will fail because of the setter check.
-    # Let's see if pc.to_polygons() handles it.
-    # It calls Polygon(vertices=vv) for each slice.
-    # slice [3:3] gives empty vv.
-    with pytest.raises(PatternError):
-        pc.to_polygons()
-
-
-def test_poly_collection_valid() -> None:
-    verts = [[0, 0], [1, 0], [0, 1], [10, 10], [11, 10], [11, 11], [10, 11]]
-    offsets = [0, 3]
-    pc = PolyCollection(verts, offsets)
-    assert len(pc.to_polygons()) == 2
-    shapes = [Circle(radius=20), Circle(radius=10), Polygon([[0, 0], [10, 0], [10, 10]]), Ellipse(radii=(5, 5))]
-    sorted_shapes = sorted(shapes)
-    assert len(sorted_shapes) == 4
-    # Just verify it doesn't crash and is stable
-    assert sorted(sorted_shapes) == sorted_shapes
-
-
-def test_poly_collection_normalized_form_reconstruction_is_independent() -> None:
-    pc = PolyCollection([[0, 0], [1, 0], [0, 1]], [0])
-    _intrinsic, _extrinsic, rebuild = pc.normalized_form(1)
-
-    clone = rebuild()
-    clone.vertex_offsets[:] = [5]
-
-    assert_equal(pc.vertex_offsets, [0])
-    assert_equal(clone.vertex_offsets, [5])
-
-
-def test_poly_collection_normalized_form_rebuilds_independent_clones() -> None:
-    pc = PolyCollection([[0, 0], [1, 0], [0, 1]], [0])
-    _intrinsic, _extrinsic, rebuild = pc.normalized_form(1)
-
-    first = rebuild()
-    second = rebuild()
-    first.vertex_offsets[:] = [7]
-
-    assert_equal(first.vertex_offsets, [7])
-    assert_equal(second.vertex_offsets, [0])
-    assert_equal(pc.vertex_offsets, [0])

masque/test/test_shape_ordering.py

@@ -0,0 +1,15 @@
+from ..shapes import Circle, Ellipse, Polygon
+
+
+def test_shape_comparisons() -> None:
+    c1 = Circle(radius=10)
+    c2 = Circle(radius=20)
+    assert c1 < c2
+    assert not (c2 < c1)
+
+    p1 = Polygon([[0, 0], [10, 0], [10, 10]])
+    p2 = Polygon([[0, 0], [10, 0], [10, 11]])
+    assert p1 < p2
+
+    assert c1 < p1 or p1 < c1
+    assert (c1 < p1) != (p1 < c1)

masque/test/test_shape_transforms.py

@@ -0,0 +1,44 @@
+from numpy import pi
+from numpy.testing import assert_equal, assert_allclose
+
+from ..shapes import Arc, Ellipse
+
+
+def test_shape_mirror() -> None:
+    e = Ellipse(radii=(10, 5), offset=(10, 20), rotation=pi / 4)
+    e.mirror(0)
+    assert_equal(e.offset, [10, 20])
+    assert_allclose(e.rotation, 3 * pi / 4, atol=1e-10)
+
+    a = Arc(radii=(10, 10), angles=(0, pi / 4), width=2, offset=(10, 20))
+    a.mirror(0)
+    assert_equal(a.offset, [10, 20])
+    assert_allclose(a.angles, [0, -pi / 4], atol=1e-10)
+
+    a = Arc(radii=(10, 5), angles=(0, pi / 4), width=2, angle_ref=Arc.AngleRef.FocusPos)
+    a.mirror(1)
+    assert a.angle_ref == Arc.AngleRef.FocusNeg
+
+    a = Arc(radii=(5, 10), angles=(0, pi / 4), width=2, angle_ref=Arc.AngleRef.FocusPos)
+    a.mirror(0)
+    assert a.angle_ref == Arc.AngleRef.FocusNeg
+
+def test_shape_flip_across() -> None:
+    e = Ellipse(radii=(10, 5), offset=(10, 20), rotation=pi / 4)
+    e.flip_across(axis=0)
+    assert_equal(e.offset, [10, -20])
+    assert_allclose(e.rotation, 3 * pi / 4, atol=1e-10)
+
+    e = Ellipse(radii=(10, 5), offset=(10, 20))
+    e.flip_across(y=10)
+    assert_equal(e.offset, [10, 0])
+
+def test_shape_scale() -> None:
+    e = Ellipse(radii=(10, 5))
+    e.scale_by(2)
+    assert_equal(e.radii, [20, 10])
+
+    a = Arc(radii=(10, 5), angles=(0, pi), width=2)
+    a.scale_by(0.5)
+    assert_equal(a.radii, [5, 2.5])
+    assert a.width == 1

masque/test/test_shapes.py

@@ -1,142 +0,0 @@
-import numpy
-from numpy.testing import assert_equal, assert_allclose
-from numpy import pi
-
-from ..shapes import Arc, Ellipse, Circle, Polygon, PolyCollection
-
-
-def test_poly_collection_init() -> None:
-    # Two squares: [[0,0], [1,0], [1,1], [0,1]] and [[10,10], [11,10], [11,11], [10,11]]
-    verts = [[0, 0], [1, 0], [1, 1], [0, 1], [10, 10], [11, 10], [11, 11], [10, 11]]
-    offsets = [0, 4]
-    pc = PolyCollection(vertex_lists=verts, vertex_offsets=offsets)
-    assert len(list(pc.polygon_vertices)) == 2
-    assert_equal(pc.get_bounds_single(), [[0, 0], [11, 11]])
-
-
-def test_poly_collection_to_polygons() -> None:
-    verts = [[0, 0], [1, 0], [1, 1], [0, 1], [10, 10], [11, 10], [11, 11], [10, 11]]
-    offsets = [0, 4]
-    pc = PolyCollection(vertex_lists=verts, vertex_offsets=offsets)
-    polys = pc.to_polygons()
-    assert len(polys) == 2
-    assert_equal(polys[0].vertices, [[0, 0], [1, 0], [1, 1], [0, 1]])
-    assert_equal(polys[1].vertices, [[10, 10], [11, 10], [11, 11], [10, 11]])
-
-
-def test_circle_init() -> None:
-    c = Circle(radius=10, offset=(5, 5))
-    assert c.radius == 10
-    assert_equal(c.offset, [5, 5])
-
-
-def test_circle_to_polygons() -> None:
-    c = Circle(radius=10)
-    polys = c.to_polygons(num_vertices=32)
-    assert len(polys) == 1
-    assert isinstance(polys[0], Polygon)
-    # A circle with 32 vertices should have vertices distributed around (0,0)
-    bounds = polys[0].get_bounds_single()
-    assert_allclose(bounds, [[-10, -10], [10, 10]], atol=1e-10)
-
-
-def test_ellipse_init() -> None:
-    e = Ellipse(radii=(10, 5), offset=(1, 2), rotation=pi / 4)
-    assert_equal(e.radii, [10, 5])
-    assert_equal(e.offset, [1, 2])
-    assert e.rotation == pi / 4
-
-
-def test_ellipse_to_polygons() -> None:
-    e = Ellipse(radii=(10, 5))
-    polys = e.to_polygons(num_vertices=64)
-    assert len(polys) == 1
-    bounds = polys[0].get_bounds_single()
-    assert_allclose(bounds, [[-10, -5], [10, 5]], atol=1e-10)
-
-
-def test_arc_init() -> None:
-    a = Arc(radii=(10, 10), angles=(0, pi / 2), width=2, offset=(0, 0))
-    assert_equal(a.radii, [10, 10])
-    assert_equal(a.angles, [0, pi / 2])
-    assert a.width == 2
-
-
-def test_arc_to_polygons() -> None:
-    # Quarter circle arc
-    a = Arc(radii=(10, 10), angles=(0, pi / 2), width=2)
-    polys = a.to_polygons(num_vertices=32)
-    assert len(polys) == 1
-    # Outer radius 11, inner radius 9
-    # Quarter circle from 0 to 90 deg
-    bounds = polys[0].get_bounds_single()
-    # Min x should be 0 (inner edge start/stop or center if width is large)
-    # But wait, the arc is centered at 0,0.
-    # Outer edge goes from (11, 0) to (0, 11)
-    # Inner edge goes from (9, 0) to (0, 9)
-    # So x ranges from 0 to 11, y ranges from 0 to 11.
-    assert_allclose(bounds, [[0, 0], [11, 11]], atol=1e-10)
-
-
-def test_shape_mirror() -> None:
-    e = Ellipse(radii=(10, 5), offset=(10, 20), rotation=pi / 4)
-    e.mirror(0)  # Mirror across x axis (axis 0): in-place relative to offset
-    assert_equal(e.offset, [10, 20])
-    # rotation was pi/4, mirrored(0) -> -pi/4 == 3pi/4 (mod pi)
-    assert_allclose(e.rotation, 3 * pi / 4, atol=1e-10)
-
-    a = Arc(radii=(10, 10), angles=(0, pi / 4), width=2, offset=(10, 20))
-    a.mirror(0)
-    assert_equal(a.offset, [10, 20])
-    # For Arc, mirror(0) negates rotation and angles
-    assert_allclose(a.angles, [0, -pi / 4], atol=1e-10)
-
-
-def test_shape_flip_across() -> None:
-    e = Ellipse(radii=(10, 5), offset=(10, 20), rotation=pi / 4)
-    e.flip_across(axis=0)  # Mirror across y=0: flips y-offset
-    assert_equal(e.offset, [10, -20])
-    # rotation also flips: -pi/4 == 3pi/4 (mod pi)
-    assert_allclose(e.rotation, 3 * pi / 4, atol=1e-10)
-    # Mirror across specific y
-    e = Ellipse(radii=(10, 5), offset=(10, 20))
-    e.flip_across(y=10)  # Mirror across y=10
-    # y=20 mirrored across y=10 -> y=0
-    assert_equal(e.offset, [10, 0])
-
-
-def test_shape_scale() -> None:
-    e = Ellipse(radii=(10, 5))
-    e.scale_by(2)
-    assert_equal(e.radii, [20, 10])
-
-    a = Arc(radii=(10, 5), angles=(0, pi), width=2)
-    a.scale_by(0.5)
-    assert_equal(a.radii, [5, 2.5])
-    assert a.width == 1
-
-
-def test_shape_arclen() -> None:
-    # Test that max_arclen correctly limits segment lengths
-
-    # Ellipse
-    e = Ellipse(radii=(10, 5))
-    # Approximate perimeter is ~48.4
-    # With max_arclen=5, should have > 10 segments
-    polys = e.to_polygons(max_arclen=5)
-    v = polys[0].vertices
-    dist = numpy.sqrt(numpy.sum(numpy.diff(v, axis=0, append=v[:1]) ** 2, axis=1))
-    assert numpy.all(dist <= 5.000001)
-    assert len(v) > 10
-
-    # Arc
-    a = Arc(radii=(10, 10), angles=(0, pi / 2), width=2)
-    # Outer perimeter is 11 * pi/2 ~ 17.27
-    # Inner perimeter is 9 * pi/2 ~ 14.14
-    # With max_arclen=2, should have > 8 segments on outer edge
-    polys = a.to_polygons(max_arclen=2)
-    v = polys[0].vertices
-    # Arc polygons are closed, but contain both inner and outer edges and caps
-    # Let's just check that all segment lengths are within limit
-    dist = numpy.sqrt(numpy.sum(numpy.diff(v, axis=0, append=v[:1]) ** 2, axis=1))
-    assert numpy.all(dist <= 2.000001)

masque/test/test_text.py

@@ -0,0 +1,47 @@
+from pathlib import Path
+
+import pytest
+import numpy
+
+from ..shapes import Polygon, Text
+
+
+def test_text_to_polygons() -> None:
+    pytest.importorskip("freetype")
+    font_path = "/usr/share/fonts/truetype/dejavu/DejaVuMathTeXGyre.ttf"
+    if not Path(font_path).exists():
+        pytest.skip("Font file not found")
+
+    t = Text("Hi", height=10, font_path=font_path)
+    polys = t.to_polygons()
+    assert len(polys) > 0
+    assert all(isinstance(p, Polygon) for p in polys)
+
+    # Each character produces polygons with distinct horizontal placement.
+    char_x_means = [p.vertices[:, 0].mean() for p in polys]
+    assert len(set(char_x_means)) >= 2
+
+def test_text_bounds_and_normalized_form() -> None:
+    pytest.importorskip("freetype")
+    font_path = "/usr/share/fonts/truetype/dejavu/DejaVuMathTeXGyre.ttf"
+    if not Path(font_path).exists():
+        pytest.skip("Font file not found")
+
+    text = Text("Hi", height=10, font_path=font_path)
+    _intrinsic, extrinsic, ctor = text.normalized_form(5)
+    normalized = ctor()
+
+    assert extrinsic[1] == 2
+    assert normalized.height == 5
+
+    bounds = text.get_bounds_single()
+    assert bounds is not None
+    assert numpy.isfinite(bounds).all()
+    assert numpy.all(bounds[1] > bounds[0])
+
+def test_text_mirroring_affects_comparison() -> None:
+    text = Text("A", height=10, font_path="dummy.ttf")
+    mirrored = Text("A", height=10, font_path="dummy.ttf", mirrored=True)
+
+    assert text != mirrored
+    assert (text < mirrored) != (mirrored < text)

masque/test/test_utils.py

@@ -33,19 +33,13 @@ def test_remove_colinear_vertices() -> None:
 
 
 def test_remove_colinear_vertices_exhaustive() -> None:
-    # U-turn
     v = [[0, 0], [10, 0], [0, 0]]
     v_clean = remove_colinear_vertices(v, closed_path=False, preserve_uturns=True)
-    # Open path should keep ends. [10,0] is between [0,0] and [0,0]?
-    # They are colinear, but it's a 180 degree turn.
-    # We preserve 180 degree turns if preserve_uturns is True.
     assert len(v_clean) == 3
 
     v_collapsed = remove_colinear_vertices(v, closed_path=False, preserve_uturns=False)
-    # If not preserving u-turns, it should collapse to just the endpoints
     assert len(v_collapsed) == 2
 
-    # 180 degree U-turn in closed path
     v = [[0, 0], [10, 0], [5, 0]]
     v_clean = remove_colinear_vertices(v, closed_path=True, preserve_uturns=False)
     assert len(v_clean) == 2

masque/test/test_visualize.py

@@ -43,7 +43,6 @@ def test_visualize_noninteractive(tmp_path) -> None:
 def test_visualize_empty() -> None:
     """ Test visualizing an empty pattern. """
     pat = Pattern()
-    # Should not raise
     pat.visualize(overdraw=True)
 
 @pytest.mark.skipif(not HAS_MATPLOTLIB, reason="matplotlib not installed")
@@ -51,5 +50,4 @@ def test_visualize_no_refs() -> None:
     """ Test visualizing a pattern with only local shapes (no library needed). """
     pat = Pattern()
     pat.polygon('L1', [[0, 0], [1, 0], [0, 1]])
-    # Should not raise even if library is None
     pat.visualize(overdraw=True)